[Sun Aug 26 21:18:32 2012] Detection parameters:
  Position = (303.5, 321.8) = 10 41 17.28 6 10 17.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29975.6 +/- 204.0
  Background counts = 93.3
  Rate = 0.6 +/- 0.004

[Sun Aug 26 21:18:33 2012] Off-axis axis estimate = 1.73'
[Sun Aug 26 21:22:43 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 21:22:43 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sun Aug 26 21:22:43 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Sun Aug 26 21:22:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sun Aug 26 22:39:16 2012] fullrun_pn_xmm0151390101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug 26 22:39:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0151390101_pi300-10000_cl_pass0_src1.csv
[Sun Aug 26 22:39:16 2012] fullrun_pn_xmm0151390101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug 26 22:39:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0151390101_pi300-10000_cl_pass0_src1.csv
[Sun Aug 26 22:39:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0151390101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0151390101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 22:39:16 2012] fullrun_pn_xmm0151390101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug 26 22:39:16 2012] fullrun_pn_xmm0151390101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug 26 22:39:16 2012] Fit fullrun_pn_xmm0151390101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Aug 26 23:47:24 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.701952 pixels away
[Sun Aug 26 23:47:25 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 23:47:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 23:47:25 2012] Assessing source extent using major
[Sun Aug 26 23:47:25 2012] Source does appear to be extended
[Sun Aug 26 23:47:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 23:47:48 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 23:47:48 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sun Aug 26 23:47:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Sun Aug 26 23:47:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Mon Aug 27 01:00:53 2012] fullrun_pn_xmm0151390101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug 27 01:00:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0151390101_pi300-10000_cl_pass1_src1.csv
[Mon Aug 27 01:00:53 2012] fullrun_pn_xmm0151390101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug 27 01:00:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0151390101_pi300-10000_cl_pass1_src1.csv
[Mon Aug 27 01:00:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0151390101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0151390101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 01:00:54 2012] fullrun_pn_xmm0151390101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug 27 01:00:54 2012] fullrun_pn_xmm0151390101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug 27 01:00:54 2012] Fit fullrun_pn_xmm0151390101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Aug 27 02:07:36 2012] Spatial fit model total counts = 25045.700000, observed total counts = 24780.000000
[Mon Aug 27 02:07:36 2012] Offset between fit and detection position for source 1 = 0.212734 pixels
[Mon Aug 27 02:07:36 2012] 25067.200000 total counts/ 5253.500000 bgd. counts: snr = 273.363933
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.212734 pixels
  Position = (303.4, 321.6) = 10 41 17.32 6 10 17.1
  Extent = 5.8 (5.8-5.9)", rotation angle = 0
  Source counts = 19813.7 +/- 158.3
  Background counts = 5253.5
  Rate = 0.4 +/- 0.004
[Mon Aug 27 02:07:36 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 02:07:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 02:07:36 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 02:07:36 2012] Source does appear to be extended
[Mon Aug 27 02:07:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 02:07:58 2012] Counts = 19813.700000, rescaling region sizes by 3.000000
[Mon Aug 27 02:07:58 2012] XMMSAS src. selection expression = ellipse(26343.180000, 27929.948600, 1050.797798, 1050.797798, 0.000000, X, Y)
[Mon Aug 27 02:07:58 2012] Writing source region out to fullrun_pn_xmm0151390101_pi300-10000_pass1_cl_src1_src.reg
[Mon Aug 27 02:07:58 2012] Extracting stamp from image fullrun_pn_xmm0151390101_pi300-10000_cl_sm2.00.img.gz, (243, 261) - (364, 382)
[Mon Aug 27 02:07:58 2012] XMMSAS bgd. selection expression = annulus(26343.180000, 27929.948600, 5253.988988, 10507.977976, X, Y) && !ellipse(37589.253723, 34039.630890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34899.217865, 37609.046967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37166.235870, 35990.931396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34157.790154, 32935.270195, 428.710383, 372.811568, 90.000000, X, Y) && !ellipse(28029.077332, 31396.381958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17466.112305, 24976.892822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27664.881653, 18844.229156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21124.775864, 17714.956253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27519.717926, 38827.660278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17053.243301, 38301.420197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15510.473480, 36674.442139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21582.715317, 34236.968597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18521.852400, 24317.365200, 310.387209, 310.387209, 0.000000, X, Y) && !ellipse(20125.819763, 22184.436554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24770.132416, 17966.544174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18066.942780, 38435.278809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30178.544000, 36845.113200, 1790.552052, 379.430411, 332.581900, X, Y) && !ellipse(29864.004000, 36695.478000, 1817.136052, 1817.136052, 0.000000, X, Y) && !ellipse(23758.048523, 34930.071960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26063.152924, 32581.831299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17109.810028, 31393.904816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18457.583878, 30042.688721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23570.024658, 29368.011261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33894.175110, 28298.634491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24970.941000, 26898.689400, 418.311212, 418.311212, 0.000000, X, Y) && !ellipse(28486.512029, 26578.887106, 1121.481186, 609.955728, 0.000000, X, Y) && !ellipse(35784.707306, 25952.472717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27346.361160, 25554.389000, 449.524013, 449.524013, 0.000000, X, Y) && !ellipse(27588.217682, 24802.805206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24133.512146, 24529.262848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31825.357697, 24415.157654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25855.925232, 24323.508698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33722.678802, 23560.137329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22636.533212, 20136.194114, 1095.169653, 629.731903, 71.449390, X, Y) && !ellipse(29746.710000, 19379.638000, 1524.664044, 434.812013, 65.914509, X, Y) && !ellipse(30260.464844, 17295.901031, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 27 02:07:58 2012] Writing fullrun_pn_xmm0151390101_pi300-10000_pass1_cl_src1.gif
[Mon Aug 27 02:08:27 2012] Mean detx,y = (87.78, -226.08) 
[Mon Aug 27 02:08:36 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 02:12:13 2012] grppha failed
[Mon Aug 27 02:12:13 2012] Setting source spectrum file to fullrun_pn_xmm0151390101_pi300-10000_pass1_cl_src1_src.pi.gz
[Mon Aug 27 02:12:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0151390101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Aug 27 03:19:47 2012] Updating aperture counts using extracted products
[Mon Aug 27 03:19:47 2012] Error reading totcts from fullrun_pn_xmm0151390101_pi300-10000_pass1_cl_src1_src.pi.gz
[Mon Aug 27 03:19:48 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 03:19:53 2012] Source 1 has no response, skipping
[Mon Aug 27 03:19:54 2012] xmm0151390101/analysis//spectral/fullrun_pn_xmm0151390101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete