[Sun Aug 26 21:19:25 2012] Detection parameters:
  Position = (297.6, 280.1) = 10 41 19.00 6 7 17.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.6 +/- 15.9
  Background counts = 69.3
  Rate = 0.002 +/- 0.0003

[Sun Aug 26 21:19:25 2012] Off-axis axis estimate = 1.33'
[Sun Aug 26 23:14:12 2012] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 23:14:12 2012] Initial guess for spatial extent in simple fitting = 7.09"
[Sun Aug 26 23:14:12 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.101
[Sun Aug 26 23:14:12 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 7.09"
[Sun Aug 26 23:47:12 2012] fullrun_mos2_xmm0151390101_pi300-10000_cl_pass0_src21.ximg exists
[Sun Aug 26 23:47:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151390101_pi300-10000_cl_pass0_src21.csv
[Sun Aug 26 23:47:12 2012] fullrun_mos2_xmm0151390101_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Aug 26 23:47:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151390101_pi300-10000_cl_pass0_src21.csv
[Sun Aug 26 23:47:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0151390101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0151390101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 23:47:12 2012] fullrun_mos2_xmm0151390101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Aug 26 23:47:12 2012] fullrun_mos2_xmm0151390101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Aug 26 23:47:12 2012] Fit fullrun_mos2_xmm0151390101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Aug 26 23:47:35 2012] Source 24 is offset by 7.106871 and -4.425379 pixels which is larger than
2 X fitted extent = 0.815503 x 0.815503, not incorporating fit results
[Sun Aug 26 23:47:35 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 23:47:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 23:47:35 2012] Assessing source extent using major
[Sun Aug 26 23:47:35 2012] Source does appear to be extended
[Sun Aug 26 23:47:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 01:33:14 2012] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 01:33:14 2012] Initial guess for spatial extent in simple fitting = 7.09"
[Mon Aug 27 01:33:14 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.101
[Mon Aug 27 01:33:14 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 7.09"
[Mon Aug 27 02:07:26 2012] fullrun_mos2_xmm0151390101_pi300-10000_cl_pass1_src21.ximg exists
[Mon Aug 27 02:07:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151390101_pi300-10000_cl_pass1_src21.csv
[Mon Aug 27 02:07:26 2012] fullrun_mos2_xmm0151390101_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon Aug 27 02:07:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151390101_pi300-10000_cl_pass1_src21.csv
[Mon Aug 27 02:07:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0151390101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0151390101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 02:07:26 2012] fullrun_mos2_xmm0151390101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon Aug 27 02:07:26 2012] fullrun_mos2_xmm0151390101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Aug 27 02:07:26 2012] Fit fullrun_mos2_xmm0151390101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Mon Aug 27 02:07:45 2012] Spatial fit model total counts = 242.000000, observed total counts = 242.000000
[Mon Aug 27 02:07:45 2012] Offset between fit and detection position for source 24 = 0.103858 pixels
[Mon Aug 27 02:07:45 2012] 244.287600 total counts/ 195.121000 bgd. counts: snr = 3.519801
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.103858 pixels
  Position = (297.6, 280.2) = 10 41 18.98 6 7 16.9
  Extent = 3.9 (3.1-4.9)", rotation angle = 0
  Source counts = 49.2 +/- 15.6
  Background counts = 195.1
  Rate = 0.001 +/- 0.0003
[Mon Aug 27 02:07:45 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 02:07:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 02:07:45 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 02:07:45 2012] Source does appear to be extended
[Mon Aug 27 02:07:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 03:10:08 2012] XMMSAS src. selection expression = ellipse(25846.451800, 24325.398800, 236.404807, 236.404807, 0.000000, X, Y)
[Mon Aug 27 03:10:08 2012] Writing source region out to fullrun_mos2_xmm0151390101_pi300-10000_pass1_cl_src24_src.reg
[Mon Aug 27 03:10:08 2012] Extracting stamp from image fullrun_mos2_xmm0151390101_pi300-10000_cl_sm2.00.img.gz, (284, 267) - (311, 294)
[Mon Aug 27 03:10:08 2012] XMMSAS bgd. selection expression = annulus(25846.451800, 24325.398800, 394.008011, 788.016023, X, Y)
[Mon Aug 27 03:10:08 2012] Writing fullrun_mos2_xmm0151390101_pi300-10000_pass1_cl_src24.gif
[Mon Aug 27 03:16:15 2012] Mean detx,y = (1830.57, -3082.44) 
[Mon Aug 27 03:16:16 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 03:16:23 2012] grppha failed
[Mon Aug 27 03:16:23 2012] Setting source spectrum file to fullrun_mos2_xmm0151390101_pi300-10000_pass1_cl_src24_src.pi.gz
[Mon Aug 27 03:16:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0151390101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Mon Aug 27 03:18:37 2012] Not generating rmf since there are only 49 counts
[Mon Aug 27 03:18:37 2012] rmf not generated due to insufficient counts
[Mon Aug 27 03:19:49 2012] Updating aperture counts using extracted products
[Mon Aug 27 03:19:49 2012] Error reading totcts from fullrun_mos2_xmm0151390101_pi300-10000_pass1_cl_src24_src.pi.gz
[Mon Aug 27 03:19:49 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 03:19:52 2012] Flag b found in src. 24 procflags, skipping spectral fitting
[Mon Aug 27 03:19:52 2012] Source 24 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Aug 27 03:19:53 2012] xmm0151390101/analysis//spectral/fullrun_mos2_xmm0151390101_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete