[Sun Aug 26 21:18:59 2012] Detection parameters:
  Position = (219.6, 298.1) = 10 41 41.75 6 8 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.3 +/- 14.1
  Background counts = 54.2
  Rate = 0.002 +/- 0.0004

[Sun Aug 26 21:18:59 2012] Off-axis axis estimate = 5.72'
[Sun Aug 26 22:39:17 2012] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 22:39:17 2012] Initial guess for spatial extent in simple fitting = 9.29"
[Sun Aug 26 22:39:17 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.080
[Sun Aug 26 22:39:17 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 9.29"
[Sun Aug 26 23:14:11 2012] fullrun_mos1_xmm0151390101_pi300-10000_cl_pass0_src23.ximg exists
[Sun Aug 26 23:14:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0151390101_pi300-10000_cl_pass0_src23.csv
[Sun Aug 26 23:14:11 2012] fullrun_mos1_xmm0151390101_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Aug 26 23:14:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0151390101_pi300-10000_cl_pass0_src23.csv
[Sun Aug 26 23:14:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0151390101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0151390101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 23:14:11 2012] fullrun_mos1_xmm0151390101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Aug 26 23:14:11 2012] fullrun_mos1_xmm0151390101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Aug 26 23:14:11 2012] Fit fullrun_mos1_xmm0151390101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun Aug 26 23:47:30 2012] Source 23 is offset by 7.099494 and 2.981829 pixels which is larger than
2 X fitted extent = 1.067545 x 1.067545, not incorporating fit results
[Sun Aug 26 23:47:30 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 23:47:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 23:47:30 2012] Assessing source extent using major
[Sun Aug 26 23:47:30 2012] Source does appear to be extended
[Sun Aug 26 23:47:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 01:00:55 2012] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 01:00:55 2012] Initial guess for spatial extent in simple fitting = 9.29"
[Mon Aug 27 01:00:55 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.080
[Mon Aug 27 01:00:55 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 9.29"
[Mon Aug 27 01:33:13 2012] fullrun_mos1_xmm0151390101_pi300-10000_cl_pass1_src22.ximg exists
[Mon Aug 27 01:33:13 2012] fullrun_mos1_xmm0151390101_pi300-10000_cl_pass1_src22_1.ximg exists
[Mon Aug 27 01:33:13 2012] Fit fullrun_mos1_xmm0151390101_pi300-10000_cl_pass1_src22 appears to have run properly
[Mon Aug 27 01:33:13 2012] fullrun_mos1_xmm0151390101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Mon Aug 27 01:33:13 2012] fullrun_mos1_xmm0151390101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Mon Aug 27 01:33:13 2012] Fit fullrun_mos1_xmm0151390101_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Mon Aug 27 02:07:40 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 10.731099 pixels away
[Mon Aug 27 02:07:40 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 02:07:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 02:07:40 2012] Assessing source extent using major
[Mon Aug 27 02:07:40 2012] Source does appear to be extended
[Mon Aug 27 02:07:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 03:00:47 2012] XMMSAS src. selection expression = ellipse(19053.776016, 25889.105133, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 27 03:00:47 2012] Writing source region out to fullrun_mos1_xmm0151390101_pi300-10000_pass1_cl_src23_src.reg
[Mon Aug 27 03:00:47 2012] Extracting stamp from image fullrun_mos1_xmm0151390101_pi300-10000_cl_sm2.00.img.gz, (182, 261) - (257, 336)
[Mon Aug 27 03:00:47 2012] XMMSAS bgd. selection expression = annulus(19053.776016, 25889.105133, 1087.500000, 2175.000000, X, Y) && !ellipse(18518.251600, 24280.718800, 555.507216, 555.507216, 0.000000, X, Y)
[Mon Aug 27 03:00:47 2012] Writing fullrun_mos1_xmm0151390101_pi300-10000_pass1_cl_src23.gif
[Mon Aug 27 03:07:30 2012] Mean detx,y = (1094.32, -7735.57) 
[Mon Aug 27 03:07:31 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 03:08:00 2012] grppha failed
[Mon Aug 27 03:08:01 2012] Setting source spectrum file to fullrun_mos1_xmm0151390101_pi300-10000_pass1_cl_src23_src.pi.gz
[Mon Aug 27 03:08:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0151390101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Mon Aug 27 03:10:06 2012] Not generating rmf since there are only 68 counts
[Mon Aug 27 03:10:06 2012] rmf not generated due to insufficient counts
[Mon Aug 27 03:19:48 2012] Updating aperture counts using extracted products
[Mon Aug 27 03:19:48 2012] Error reading totcts from fullrun_mos1_xmm0151390101_pi300-10000_pass1_cl_src23_src.pi.gz
[Mon Aug 27 03:19:48 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 03:19:51 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Aug 27 03:19:52 2012] xmm0151390101/analysis//spectral/fullrun_mos1_xmm0151390101_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete