[Thu Aug  2 10:14:04 2012] Detection parameters:
  Position = (336.9, 324.6) = 3 55 15.82 31 3 20.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1854.9 +/- 65.6
  Background counts = 441.0
  Rate = 0.1 +/- 0.004

[Thu Aug  2 10:14:06 2012] Off-axis axis estimate = 3.37'
[Thu Aug  2 10:23:45 2012] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 10:23:45 2012] Initial guess for spatial extent in simple fitting = 8.12"
[Thu Aug  2 10:23:45 2012] source mask rpix=1.9, npix_max = 22, mask sum = 15, frac = 0.670
[Thu Aug  2 10:23:45 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 8.12"
[Thu Aug  2 17:00:47 2012] fullrun_pn_xmm0151380101_pi300-10000_cl_pass0_src22.ximg exists
[Thu Aug  2 17:00:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0151380101_pi300-10000_cl_pass0_src22.csv
[Thu Aug  2 17:00:47 2012] fullrun_pn_xmm0151380101_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu Aug  2 17:00:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0151380101_pi300-10000_cl_pass0_src22.csv
[Thu Aug  2 17:00:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0151380101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0151380101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 17:00:47 2012] fullrun_pn_xmm0151380101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu Aug  2 17:00:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0151380101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Thu Aug  2 17:00:47 2012] fullrun_pn_xmm0151380101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Aug  2 17:00:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0151380101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Thu Aug  2 17:00:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0151380101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0151380101_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 00:13:34 2012] Spatial fit model total counts = 21072.400000, observed total counts = 12539.000000
[Fri Aug  3 00:13:34 2012] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug  3 00:13:34 2012] Spatial fit model total counts = 8895.980000, observed total counts = 7408.000000
[Fri Aug  3 00:13:34 2012] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug  3 00:13:34 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 00:13:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 00:13:34 2012] Assessing source extent using major
[Fri Aug  3 00:13:34 2012] Source does appear to be extended
[Fri Aug  3 00:13:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 00:14:05 2012] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 00:14:05 2012] Initial guess for spatial extent in simple fitting = 8.12"
[Fri Aug  3 00:14:05 2012] source mask rpix=1.9, npix_max = 22, mask sum = 15, frac = 0.670
[Fri Aug  3 00:14:05 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 8.12"
[Fri Aug  3 03:25:54 2012] fullrun_pn_xmm0151380101_pi300-10000_cl_pass1_src20.ximg exists
[Fri Aug  3 03:25:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0151380101_pi300-10000_cl_pass1_src20.csv
[Fri Aug  3 03:25:54 2012] fullrun_pn_xmm0151380101_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri Aug  3 03:25:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0151380101_pi300-10000_cl_pass1_src20.csv
[Fri Aug  3 03:25:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0151380101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0151380101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 03:25:55 2012] fullrun_pn_xmm0151380101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri Aug  3 03:25:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0151380101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Aug  3 03:25:55 2012] fullrun_pn_xmm0151380101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Aug  3 03:25:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0151380101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Aug  3 03:25:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0151380101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0151380101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 10:39:52 2012] Warning, spatial fit 20 centroid is now closest to src. 23
[Fri Aug  3 10:39:52 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 10:39:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 10:39:52 2012] Assessing source extent using major
[Fri Aug  3 10:39:52 2012] Source does appear to be extended
[Fri Aug  3 10:39:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 10:40:32 2012] Counts = 1854.850830, rescaling region sizes by 2.000000
[Fri Aug  3 10:40:32 2012] XMMSAS src. selection expression = ellipse(29261.682648, 28193.885620, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Aug  3 10:40:32 2012] Writing source region out to fullrun_pn_xmm0151380101_pi300-10000_pass1_cl_src25_src.reg
[Fri Aug  3 10:40:32 2012] Extracting stamp from image fullrun_pn_xmm0151380101_pi300-10000_cl_sm2.00.img.gz, (262, 250) - (412, 400)
[Fri Aug  3 10:40:32 2012] XMMSAS bgd. selection expression = annulus(29261.682648, 28193.885620, 4350.000000, 8700.000000, X, Y) && !ellipse(27394.212036, 26742.404999, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(27419.784740, 27356.628600, 3203.064092, 3203.064092, 0.000000, X, Y) && !ellipse(20972.969254, 36823.237946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20684.856094, 35422.545380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30614.053680, 34873.424255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27660.843353, 30747.187469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26545.271729, 30815.275696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28870.166718, 30386.196411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28617.997345, 30410.006714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30756.055267, 30441.782104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29987.644653, 30043.493195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28705.002655, 29869.756042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24355.379669, 29384.544128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31173.048859, 29276.694183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25940.238342, 28952.446075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26963.699036, 28707.421387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27931.552795, 28572.652100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28590.552307, 28488.915131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25051.403564, 28349.905762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24960.123657, 27558.523834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24551.822632, 26147.609406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23800.531647, 25712.734192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25146.119080, 25450.427917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26772.467896, 24486.121277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26679.033000, 24141.662000, 804.616023, 804.616023, 0.000000, X, Y) && !ellipse(24345.306488, 24069.122375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28548.063873, 24398.202637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26548.068200, 23540.322000, 890.680026, 890.680026, 0.000000, X, Y) && !ellipse(26232.238600, 22162.710000, 1310.008038, 519.713615, 90.000000, X, Y) && !ellipse(26135.529022, 21699.735733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26049.415000, 21426.084000, 1149.352033, 1149.352033, 0.000000, X, Y) && !ellipse(26044.717760, 21250.699820, 1846.864053, 441.839213, 104.115100, X, Y) && !ellipse(25876.258200, 20547.874000, 906.792026, 906.792026, 0.000000, X, Y) && !ellipse(25785.793774, 20085.520868, 1838.552053, 449.057944, 103.486218, X, Y) && !ellipse(25658.424830, 19533.381802, 1495.960043, 442.562369, 104.891385, X, Y) && !ellipse(25536.605240, 18985.989140, 1495.960043, 447.143213, 104.557000, X, Y) && !ellipse(25358.174196, 18181.381693, 1601.616046, 455.835261, 103.194325, X, Y)
[Fri Aug  3 10:40:32 2012] Writing fullrun_pn_xmm0151380101_pi300-10000_pass1_cl_src25.gif
[Fri Aug  3 11:28:18 2012] Mean detx,y = (1335.22, -1147.59) 
[Fri Aug  3 11:28:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 11:31:15 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 11:31:15 2012] Setting source spectrum file to fullrun_pn_xmm0151380101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri Aug  3 11:31:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0151380101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Fri Aug  3 21:21:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug  3 21:21:59 2012] rmf not generated due to insufficient counts
[Sat Aug  4 05:45:53 2012] Updating aperture counts using extracted products
[Sat Aug  4 05:45:53 2012] Error reading totcts from fullrun_pn_xmm0151380101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Aug  4 05:45:54 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 05:45:54 2012] Using photon index=1.80, rate=0.101, arf fullrun_pn_xmm0151380101_pi300-10000_pass1_cl_src25.arf
[Sat Aug  4 05:45:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 05:45:54 2012] Updating source flux to 2.5e-13
[Sat Aug  4 05:50:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting