[Thu Aug  2 10:15:38 2012] Detection parameters:
  Position = (325.7, 310.0) = 3 55 19.59 31 2 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10878.5 +/- 139.5
  Background counts = 280.4
  Rate = 0.4 +/- 0.005

[Thu Aug  2 10:15:42 2012] Off-axis axis estimate = 2.15'
[Thu Aug  2 19:51:32 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 19:51:32 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Thu Aug  2 19:51:32 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.808
[Thu Aug  2 19:51:32 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.50"
[Fri Aug  3 00:13:22 2012] fullrun_mos2_xmm0151380101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Aug  3 00:13:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151380101_pi300-10000_cl_pass0_src3.csv
[Fri Aug  3 00:13:22 2012] fullrun_mos2_xmm0151380101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Aug  3 00:13:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151380101_pi300-10000_cl_pass0_src3.csv
[Fri Aug  3 00:13:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0151380101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0151380101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 00:13:23 2012] fullrun_mos2_xmm0151380101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Aug  3 00:13:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151380101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Aug  3 00:13:23 2012] fullrun_mos2_xmm0151380101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Aug  3 00:13:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151380101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Aug  3 00:13:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0151380101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0151380101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 00:13:51 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Fri Aug  3 00:13:52 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 00:13:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 00:13:52 2012] Assessing source extent using major
[Fri Aug  3 00:13:52 2012] Source does appear to be extended
[Fri Aug  3 00:13:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 00:13:52 2012] Source is confused with source 5
[Fri Aug  3 00:13:52 2012] Source is confused with source 4
[Fri Aug  3 07:19:16 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 07:19:16 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Fri Aug  3 07:19:16 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.808
[Fri Aug  3 07:19:16 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.50"
[Fri Aug  3 10:39:35 2012] fullrun_mos2_xmm0151380101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug  3 10:39:35 2012] fullrun_mos2_xmm0151380101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug  3 10:39:35 2012] Fit fullrun_mos2_xmm0151380101_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri Aug  3 10:39:35 2012] fullrun_mos2_xmm0151380101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug  3 10:39:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151380101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Aug  3 10:39:35 2012] fullrun_mos2_xmm0151380101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug  3 10:39:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151380101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Aug  3 10:39:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0151380101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0151380101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 10:40:13 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Fri Aug  3 10:40:13 2012] Source 1 is offset by 8.734223 and -1.807725 pixels which is larger than
2 X fitted extent = 2.945761 x 2.945761, not incorporating fit results
[Fri Aug  3 10:40:13 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.411946 pixels away
[Fri Aug  3 10:40:13 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 10:40:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 10:40:13 2012] Assessing source extent using major
[Fri Aug  3 10:40:13 2012] Source does appear to be extended
[Fri Aug  3 10:40:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 02:19:45 2012] Counts = 10878.458008, rescaling region sizes by 3.000000
[Sat Aug  4 02:19:45 2012] XMMSAS src. selection expression = ellipse(28291.577423, 26919.691925, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sat Aug  4 02:19:45 2012] Writing source region out to fullrun_mos2_xmm0151380101_pi300-10000_pass1_cl_src1_src.reg
[Sat Aug  4 02:19:45 2012] Extracting stamp from image fullrun_mos2_xmm0151380101_pi300-10000_cl_sm2.00.img.gz, (213, 197) - (438, 422)
[Sat Aug  4 02:19:45 2012] XMMSAS bgd. selection expression = annulus(28291.577423, 26919.691925, 9787.500000, 19575.000000, X, Y) && !ellipse(27387.324340, 27311.111200, 4807.344138, 4807.344138, 0.000000, X, Y) && !ellipse(27618.866000, 27504.394000, 3645.792105, 3645.792105, 0.000000, X, Y) && !ellipse(28112.202000, 27508.868000, 1695.008049, 1695.008049, 0.000000, X, Y) && !ellipse(28130.778229, 26477.183502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28921.134000, 28000.762000, 1215.264035, 1215.264035, 0.000000, X, Y) && !ellipse(27977.049377, 25783.081848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28567.679230, 28502.763763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25617.357574, 28158.249817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27406.624298, 24409.141357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25831.031677, 29024.174347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31041.372681, 25696.705780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28671.132446, 32834.943207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28155.031921, 30574.156555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28438.230621, 31707.676178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26460.058563, 23710.319061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28390.840000, 31072.750000, 1370.952039, 1370.952039, 0.000000, X, Y) && !ellipse(26271.875600, 22370.250000, 1283.008037, 1283.008037, 0.000000, X, Y) && !ellipse(25738.056000, 21048.568000, 2636.808076, 2636.808076, 0.000000, X, Y) && !ellipse(27392.831421, 23779.846313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20948.937256, 36833.775757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31382.798828, 27462.255127, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26124.136400, 21854.252000, 1130.496033, 1130.496033, 0.000000, X, Y) && !ellipse(24110.997498, 28916.465118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29629.069672, 24336.911285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25705.631989, 24566.749207, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug  4 02:19:45 2012] Writing fullrun_mos2_xmm0151380101_pi300-10000_pass1_cl_src1.gif
[Sat Aug  4 02:31:29 2012] Mean detx,y = (-51.43, 29.64) 
[Sat Aug  4 02:31:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 02:39:09 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 02:39:10 2012] Setting source spectrum file to fullrun_mos2_xmm0151380101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug  4 02:39:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0151380101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Aug  4 04:12:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Aug  4 04:12:37 2012] rmf not generated due to insufficient counts
[Sat Aug  4 05:45:58 2012] Updating aperture counts using extracted products
[Sat Aug  4 05:45:58 2012] Error reading totcts from fullrun_mos2_xmm0151380101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug  4 05:45:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 05:45:59 2012] Using photon index=1.80, rate=0.376, arf fullrun_mos2_xmm0151380101_pi300-10000_pass1_cl_src1.arf
[Sat Aug  4 05:45:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 05:45:59 2012] Updating source flux to 3.4e-12
[Sat Aug  4 05:48:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting