[Thu Jul 19 04:52:39 2012] Detection parameters:
  Position = (308.8, 321.7) = 3 33 37.12 -36 9 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.4 +/- 18.0
  Background counts = 29.2
  Rate = 0.007 +/- 0.001

[Thu Jul 19 04:52:40 2012] Off-axis axis estimate = 1.85'
[Thu Jul 19 04:54:40 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 04:54:40 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Thu Jul 19 04:54:40 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.834
[Thu Jul 19 04:54:40 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 7.35"
[Thu Jul 19 07:24:10 2012] fullrun_pn_xmm0151370101_pi300-10000_cl_pass0_src25.ximg exists
[Thu Jul 19 07:24:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0151370101_pi300-10000_cl_pass0_src25.csv
[Thu Jul 19 07:24:10 2012] fullrun_pn_xmm0151370101_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu Jul 19 07:24:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0151370101_pi300-10000_cl_pass0_src25.csv
[Thu Jul 19 07:24:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0151370101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0151370101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 07:24:11 2012] fullrun_pn_xmm0151370101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu Jul 19 07:24:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0151370101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu Jul 19 07:24:11 2012] fullrun_pn_xmm0151370101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Jul 19 07:24:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0151370101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu Jul 19 07:24:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0151370101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0151370101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 09:00:36 2012] Source 25 is offset by -2.302923 and -7.062810 pixels which is larger than
2 X fitted extent = 2.566828 x 2.566828, not incorporating fit results
[Thu Jul 19 09:00:36 2012] Source 25 is offset by -1.296113 and -8.734833 pixels which is larger than
2 X fitted extent = 2.655729 x 2.366690, not incorporating fit results
[Thu Jul 19 09:00:36 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 09:00:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 09:00:36 2012] Assessing source extent using major
[Thu Jul 19 09:00:36 2012] Source does appear to be extended
[Thu Jul 19 09:00:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 09:00:36 2012] Source is confused with source 26
[Thu Jul 19 09:00:36 2012] Source is confused with source 29
[Thu Jul 19 09:00:55 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 09:00:55 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Thu Jul 19 09:00:55 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.834
[Thu Jul 19 09:00:55 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 7.35"
[Thu Jul 19 11:26:19 2012] fullrun_pn_xmm0151370101_pi300-10000_cl_pass1_src24.ximg exists
[Thu Jul 19 11:26:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0151370101_pi300-10000_cl_pass1_src24.csv
[Thu Jul 19 11:26:19 2012] fullrun_pn_xmm0151370101_pi300-10000_cl_pass1_src24_1.ximg exists
[Thu Jul 19 11:26:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0151370101_pi300-10000_cl_pass1_src24.csv
[Thu Jul 19 11:26:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0151370101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0151370101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 11:26:20 2012] fullrun_pn_xmm0151370101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Thu Jul 19 11:26:20 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0151370101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Thu Jul 19 11:26:20 2012] fullrun_pn_xmm0151370101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Thu Jul 19 11:26:20 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0151370101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Thu Jul 19 11:26:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0151370101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0151370101_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 13:11:23 2012] Source 25 is offset by -2.186683 and -7.062810 pixels which is larger than
2 X fitted extent = 1.966028 x 1.966028, not incorporating fit results
[Thu Jul 19 13:11:23 2012] Source 25 is offset by 0.748231 and -7.334074 pixels which is larger than
2 X fitted extent = 0.628892 x 0.628892, not incorporating fit results
[Thu Jul 19 13:11:23 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 13:11:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 13:11:23 2012] Assessing source extent using major
[Thu Jul 19 13:11:23 2012] Source does appear to be extended
[Thu Jul 19 13:11:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 13:11:56 2012] XMMSAS src. selection expression = ellipse(26815.304138, 27939.143524, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 19 13:11:56 2012] Writing source region out to fullrun_pn_xmm0151370101_pi300-10000_pass1_cl_src25_src.reg
[Thu Jul 19 13:11:56 2012] Extracting stamp from image fullrun_pn_xmm0151370101_pi300-10000_cl_sm2.00.img.gz, (271, 284) - (346, 359)
[Thu Jul 19 13:11:56 2012] XMMSAS bgd. selection expression = annulus(26815.304138, 27939.143524, 1087.500000, 2175.000000, X, Y) && !ellipse(28108.642000, 30676.466000, 720.691221, 483.237614, 359.920845, X, Y) && !ellipse(26836.499237, 29954.379791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28181.972504, 30150.158997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26113.691406, 29876.457336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28182.593781, 29084.353241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25827.412872, 28968.960358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27020.196480, 28720.989600, 575.285617, 575.285617, 0.000000, X, Y) && !ellipse(28695.869354, 28655.279266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29472.746857, 28318.972015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26335.096954, 28076.912994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27444.227936, 27334.316000, 328.539209, 328.539209, 0.000000, X, Y) && !ellipse(26659.376600, 27328.902000, 262.317608, 262.317608, 0.000000, X, Y) && !ellipse(26848.388458, 26326.391113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26212.495667, 26127.064789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27550.546400, 25590.741000, 401.634412, 401.634412, 0.000000, X, Y)
[Thu Jul 19 13:11:56 2012] Writing fullrun_pn_xmm0151370101_pi300-10000_pass1_cl_src25.gif
[Thu Jul 19 13:30:42 2012] Mean detx,y = (-700.70, -970.36) 
[Thu Jul 19 13:30:46 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 13:31:09 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 13:31:10 2012] Setting source spectrum file to fullrun_pn_xmm0151370101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu Jul 19 13:31:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0151370101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Thu Jul 19 13:57:10 2012] Not generating rmf since there are only 93 counts
[Thu Jul 19 13:57:10 2012] rmf not generated due to insufficient counts
[Thu Jul 19 15:06:52 2012] Updating aperture counts using extracted products
[Thu Jul 19 15:06:52 2012] Error reading totcts from fullrun_pn_xmm0151370101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu Jul 19 15:06:53 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 15:06:53 2012] Using photon index=1.80, rate=0.00681, arf fullrun_pn_xmm0151370101_pi300-10000_pass1_cl_src25.arf
[Thu Jul 19 15:06:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 15:06:53 2012] Updating source flux to 1.9e-14
[Thu Jul 19 15:07:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting