[Thu Oct 13 23:47:31 2011] Detection parameters:
  Position = (270.9, 289.2) = 7 51 30.55 50 13 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.4 +/- 10.7
  Background counts = 18.7
  Rate = 0.004 +/- 0.001

[Thu Oct 13 23:47:31 2011] Off-axis axis estimate = 2.10'
[Fri Oct 14 01:51:34 2011] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 01:51:34 2011] Initial guess for spatial extent in simple fitting = 7.48"
[Fri Oct 14 01:51:34 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.812
[Fri Oct 14 01:51:34 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 7.48"
[Fri Oct 14 02:57:55 2011] fullrun_mos2_xmm0151270201_pi300-10000_cl_pass0_src17.ximg exists
[Fri Oct 14 02:57:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151270201_pi300-10000_cl_pass0_src17.csv
[Fri Oct 14 02:57:55 2011] fullrun_mos2_xmm0151270201_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Oct 14 02:57:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151270201_pi300-10000_cl_pass0_src17.csv
[Fri Oct 14 02:57:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0151270201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0151270201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 02:57:55 2011] fullrun_mos2_xmm0151270201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Oct 14 02:57:55 2011] fullrun_mos2_xmm0151270201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Oct 14 02:57:55 2011] Fit fullrun_mos2_xmm0151270201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Oct 14 02:58:15 2011] Warning, spatial fit 17 centroid is now closest to src. 11
[Fri Oct 14 02:58:15 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 02:58:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 02:58:15 2011] Assessing source extent using major
[Fri Oct 14 02:58:15 2011] Source does appear to be extended
[Fri Oct 14 02:58:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 02:58:15 2011] Source is confused with source 11
[Fri Oct 14 05:21:47 2011] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 05:21:47 2011] Initial guess for spatial extent in simple fitting = 7.48"
[Fri Oct 14 05:21:47 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.812
[Fri Oct 14 05:21:47 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 7.48"
[Fri Oct 14 06:10:42 2011] fullrun_mos2_xmm0151270201_pi300-10000_cl_pass1_src16.ximg exists
[Fri Oct 14 06:10:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151270201_pi300-10000_cl_pass1_src16.csv
[Fri Oct 14 06:10:42 2011] fullrun_mos2_xmm0151270201_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri Oct 14 06:10:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151270201_pi300-10000_cl_pass1_src16.csv
[Fri Oct 14 06:10:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0151270201_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0151270201_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 06:10:42 2011] fullrun_mos2_xmm0151270201_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri Oct 14 06:10:42 2011] fullrun_mos2_xmm0151270201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Oct 14 06:10:42 2011] Fit fullrun_mos2_xmm0151270201_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Oct 14 06:10:59 2011] Source 9 is offset by -5.535503 and 0.966943 pixels which is larger than
2 X fitted extent = 2.524041 x 2.524041, not incorporating fit results
[Fri Oct 14 06:10:59 2011] Source 9 is offset by 6.418278 and 3.624969 pixels which is larger than
2 X fitted extent = 0.859844 x 0.859844, not incorporating fit results
[Fri Oct 14 06:10:59 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 06:10:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 06:10:59 2011] Assessing source extent using major
[Fri Oct 14 06:10:59 2011] Source does appear to be extended
[Fri Oct 14 06:10:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 07:38:38 2011] XMMSAS src. selection expression = ellipse(23521.002197, 25114.516266, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Oct 14 07:38:38 2011] Writing source region out to fullrun_mos2_xmm0151270201_pi300-10000_pass1_cl_src9_src.reg
[Fri Oct 14 07:38:38 2011] Extracting stamp from image fullrun_mos2_xmm0151270201_pi300-10000_cl_sm2.00.img.gz, (233, 252) - (308, 327)
[Fri Oct 14 07:38:38 2011] XMMSAS bgd. selection expression = annulus(23521.002197, 25114.516266, 1087.500000, 2175.000000, X, Y) && !ellipse(25362.551820, 25804.430600, 737.904021, 737.904021, 0.000000, X, Y) && !ellipse(24545.722000, 25599.278000, 592.568817, 592.568817, 0.000000, X, Y) && !ellipse(22288.988953, 26281.571564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26228.044000, 21769.340000, 1353.680039, 1353.680039, 0.000000, X, Y) && !ellipse(24649.312653, 25028.641998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24254.423600, 23994.040000, 1191.480034, 260.199207, 75.990000, X, Y)
[Fri Oct 14 07:38:38 2011] Writing fullrun_mos2_xmm0151270201_pi300-10000_pass1_cl_src9.gif
[Fri Oct 14 07:43:25 2011] Mean detx,y = (-1247.56, -1287.40) 
[Fri Oct 14 07:43:28 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct 14 07:43:44 2011] Binned source spectrum to 10 counts/bin
[Fri Oct 14 07:43:44 2011] Setting source spectrum file to fullrun_mos2_xmm0151270201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Oct 14 07:43:44 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0151270201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Oct 14 07:50:04 2011] Not generating rmf since there are only 44 counts
[Fri Oct 14 07:50:04 2011] rmf not generated due to insufficient counts
[Fri Oct 14 07:50:30 2011] Updating aperture counts using extracted products
[Fri Oct 14 07:50:30 2011] Error reading totcts from fullrun_mos2_xmm0151270201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Oct 14 07:50:30 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 07:50:30 2011] Using photon index=1.80, rate=0.00413, arf fullrun_mos2_xmm0151270201_pi300-10000_pass1_cl_src9.arf
[Fri Oct 14 07:50:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct 14 07:50:30 2011] Updating source flux to 4e-14
[Fri Oct 14 07:52:28 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting