[Thu May 31 03:51:03 2012] Detection parameters:
  Position = (151.7, 243.9) = 1 24 38.82 -35 7 6.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.0 +/- 13.0
  Background counts = 60.4
  Rate = 0.001 +/- 0.0003

[Thu May 31 03:51:03 2012] Off-axis axis estimate = 11.35'
[Thu May 31 03:54:07 2012] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Thu May 31 03:54:07 2012] Initial guess for spatial extent in simple fitting = 12.10"
[Thu May 31 03:54:07 2012] source mask rpix=2.8, npix_max = 43, mask sum = 31, frac = 0.720
[Thu May 31 03:54:07 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 12.10"
[Thu May 31 04:49:00 2012] fullrun_pn_xmm0150940101_pi300-10000_cl_pass0_src40.ximg exists
[Thu May 31 04:49:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150940101_pi300-10000_cl_pass0_src40.csv
[Thu May 31 04:49:00 2012] fullrun_pn_xmm0150940101_pi300-10000_cl_pass0_src40_1.ximg exists
[Thu May 31 04:49:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150940101_pi300-10000_cl_pass0_src40.csv
[Thu May 31 04:49:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150940101_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150940101_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 04:49:01 2012] fullrun_pn_xmm0150940101_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Thu May 31 04:49:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150940101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Thu May 31 04:49:01 2012] fullrun_pn_xmm0150940101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Thu May 31 04:49:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150940101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Thu May 31 04:49:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150940101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150940101_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 06:12:32 2012] Spatial fit model total counts = 474.124000, observed total counts = 474.000000
[Thu May 31 06:12:32 2012] Offset between fit and detection position for source 42 = 0.882194 pixels
[Thu May 31 06:12:32 2012] Warning, changing simple spatial fit ID from 40 to 37
[Thu May 31 06:12:32 2012] 481.053650 total counts/ 476.494000 bgd. counts: snr = 0.208883
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.882194 pixels
  Position = (152.4, 244.6) = 1 24 38.59 -35 7 3.1
  Extent = 3.0 (2.9-5.5)", rotation angle = 0
  Source counts = 4.6 +/- 21.9
  Background counts = 476.5
  Rate = 0.0001 +/- 0.0005
  Deleting source due to low Poisson probability