[Thu May 31 03:51:21 2012] Detection parameters:
  Position = (191.9, 406.9) = 1 24 24.50 -34 55 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.3 +/- 11.0
  Background counts = 19.3
  Rate = 0.001 +/- 0.0002

[Thu May 31 03:51:21 2012] Off-axis axis estimate = 11.03'
[Thu May 31 04:49:01 2012] Using EEF radius (= 11.94 ")to estimate initial spatial extent for simple fitting
[Thu May 31 04:49:01 2012] Initial guess for spatial extent in simple fitting = 11.94"
[Thu May 31 04:49:01 2012] source mask rpix=2.7, npix_max = 42, mask sum = 34, frac = 0.807
[Thu May 31 04:49:01 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 11.94"
[Thu May 31 05:33:05 2012] fullrun_mos1_xmm0150940101_pi300-10000_cl_pass0_src28.ximg exists
[Thu May 31 05:33:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150940101_pi300-10000_cl_pass0_src28.csv
[Thu May 31 05:33:06 2012] fullrun_mos1_xmm0150940101_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu May 31 05:33:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150940101_pi300-10000_cl_pass0_src28.csv
[Thu May 31 05:33:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150940101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150940101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 05:33:06 2012] fullrun_mos1_xmm0150940101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu May 31 05:33:06 2012] fullrun_mos1_xmm0150940101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu May 31 05:33:06 2012] Fit fullrun_mos1_xmm0150940101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Thu May 31 06:12:37 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 14.859415 pixels away
[Thu May 31 06:12:37 2012] Vigneting correction estimate = 1.000000
[Thu May 31 06:12:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 06:12:37 2012] Assessing source extent using major
[Thu May 31 06:12:37 2012] Source does appear to be extended
[Thu May 31 06:12:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 06:46:20 2012] Using EEF radius (= 11.94 ")to estimate initial spatial extent for simple fitting
[Thu May 31 06:46:20 2012] Initial guess for spatial extent in simple fitting = 11.94"
[Thu May 31 06:46:20 2012] source mask rpix=2.7, npix_max = 42, mask sum = 34, frac = 0.807
[Thu May 31 06:46:20 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 11.94"
[Thu May 31 07:14:55 2012] fullrun_mos1_xmm0150940101_pi300-10000_cl_pass1_src20.ximg exists
[Thu May 31 07:14:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150940101_pi300-10000_cl_pass1_src20.csv
[Thu May 31 07:14:55 2012] fullrun_mos1_xmm0150940101_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu May 31 07:14:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150940101_pi300-10000_cl_pass1_src20.csv
[Thu May 31 07:14:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150940101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150940101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 07:14:55 2012] fullrun_mos1_xmm0150940101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu May 31 07:14:55 2012] fullrun_mos1_xmm0150940101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu May 31 07:14:55 2012] Fit fullrun_mos1_xmm0150940101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Thu May 31 08:17:21 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 67.696114 pixels away
[Thu May 31 08:17:21 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 15.700017 pixels away
[Thu May 31 08:17:21 2012] Vigneting correction estimate = 1.000000
[Thu May 31 08:17:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 08:17:21 2012] Assessing source extent using major
[Thu May 31 08:17:21 2012] Source does appear to be extended
[Thu May 31 08:17:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 09:25:27 2012] XMMSAS src. selection expression = ellipse(16643.551041, 35353.116364, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 31 09:25:27 2012] Writing source region out to fullrun_mos1_xmm0150940101_pi300-10000_pass1_cl_src20_src.reg
[Thu May 31 09:25:27 2012] Extracting stamp from image fullrun_mos1_xmm0150940101_pi300-10000_cl_sm2.00.img.gz, (154, 369) - (229, 444)
[Thu May 31 09:25:28 2012] XMMSAS bgd. selection expression = annulus(16643.551041, 35353.116364, 1087.500000, 2175.000000, X, Y) && !ellipse(13376.140000, 37204.830000, 4106.432118, 4106.432118, 0.000000, X, Y) && !ellipse(14319.862000, 36715.671200, 2053.216059, 2053.216059, 0.000000, X, Y)
[Thu May 31 09:25:28 2012] Writing fullrun_mos1_xmm0150940101_pi300-10000_pass1_cl_src20.gif
[Thu May 31 09:31:25 2012] Mean detx,y = (-4708.65, 11423.97) 
[Thu May 31 09:31:26 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 09:31:33 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 09:31:34 2012] Setting source spectrum file to fullrun_mos1_xmm0150940101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu May 31 09:31:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0150940101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu May 31 09:47:50 2012] Not generating rmf since there are only 59 counts
[Thu May 31 09:47:50 2012] rmf not generated due to insufficient counts
[Thu May 31 10:25:25 2012] Updating aperture counts using extracted products
[Thu May 31 10:25:25 2012] Error reading totcts from fullrun_mos1_xmm0150940101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu May 31 10:25:25 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 10:25:25 2012] Using photon index=1.80, rate=0.00129, arf fullrun_mos1_xmm0150940101_pi300-10000_pass1_cl_src20.arf
[Thu May 31 10:25:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 10:25:25 2012] Updating source flux to 2.5e-14
[Thu May 31 10:25:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting