[Thu Jan  5 05:58:43 2012] Detection parameters:
  Position = (228.4, 416.1) = 13 21 5.08 70 6 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 237.8 +/- 21.2
  Background counts = 45.7
  Rate = 0.02 +/- 0.002

[Thu Jan  5 05:58:44 2012] Off-axis axis estimate = 9.93'
[Thu Jan  5 06:02:30 2012] Using EEF radius (= 11.39 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 06:02:30 2012] Initial guess for spatial extent in simple fitting = 11.39"
[Thu Jan  5 06:02:30 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.079
[Thu Jan  5 06:02:30 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.39"
[Thu Jan  5 07:04:21 2012] fullrun_pn_xmm0150900101_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jan  5 07:04:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150900101_pi300-10000_cl_pass0_src5.csv
[Thu Jan  5 07:04:21 2012] fullrun_pn_xmm0150900101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jan  5 07:04:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150900101_pi300-10000_cl_pass0_src5.csv
[Thu Jan  5 07:04:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150900101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150900101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 07:04:21 2012] fullrun_pn_xmm0150900101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jan  5 07:04:21 2012] fullrun_pn_xmm0150900101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jan  5 07:04:21 2012] Fit fullrun_pn_xmm0150900101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Jan  5 08:29:58 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.217404 pixels away
[Thu Jan  5 08:29:58 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 08:29:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 08:29:58 2012] Assessing source extent using major
[Thu Jan  5 08:29:58 2012] Source does appear to be extended
[Thu Jan  5 08:29:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 08:30:18 2012] Using EEF radius (= 11.39 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 08:30:18 2012] Initial guess for spatial extent in simple fitting = 11.39"
[Thu Jan  5 08:30:18 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.079
[Thu Jan  5 08:30:18 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.39"
[Thu Jan  5 09:32:43 2012] fullrun_pn_xmm0150900101_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jan  5 09:32:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150900101_pi300-10000_cl_pass1_src5.csv
[Thu Jan  5 09:32:43 2012] fullrun_pn_xmm0150900101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jan  5 09:32:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150900101_pi300-10000_cl_pass1_src5.csv
[Thu Jan  5 09:32:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150900101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150900101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 09:32:44 2012] fullrun_pn_xmm0150900101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jan  5 09:32:44 2012] fullrun_pn_xmm0150900101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jan  5 09:32:44 2012] Fit fullrun_pn_xmm0150900101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Jan  5 10:42:00 2012] Spatial fit model total counts = 311.997000, observed total counts = 312.000000
[Thu Jan  5 10:42:00 2012] Offset between fit and detection position for source 5 = 0.047160 pixels
[Thu Jan  5 10:42:00 2012] 312.648000 total counts/ 147.551000 bgd. counts: snr = 13.591522
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.047160 pixels
  Position = (228.3, 416.1) = 13 21 5.12 70 6 18.7
  Extent = 7.7 (6.6-9.1)", rotation angle = 0
  Source counts = 165.1 +/- 17.7
  Background counts = 147.6
  Rate = 0.01 +/- 0.002
[Thu Jan  5 10:42:00 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 10:42:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 10:42:00 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 10:42:00 2012] Source does appear to be extended
[Thu Jan  5 10:42:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 10:42:20 2012] XMMSAS src. selection expression = ellipse(19816.798200, 36150.083200, 459.013213, 459.013213, 0.000000, X, Y)
[Thu Jan  5 10:42:20 2012] Writing source region out to fullrun_pn_xmm0150900101_pi300-10000_pass1_cl_src5_src.reg
[Thu Jan  5 10:42:20 2012] Extracting stamp from image fullrun_pn_xmm0150900101_pi300-10000_cl_sm2.00.img.gz, (202, 390) - (255, 442)
[Thu Jan  5 10:42:20 2012] XMMSAS bgd. selection expression = annulus(19816.798200, 36150.083200, 765.022022, 1530.044044, X, Y) && !ellipse(19106.234400, 34826.011200, 488.600014, 488.600014, 0.000000, X, Y)
[Thu Jan  5 10:42:20 2012] Writing fullrun_pn_xmm0150900101_pi300-10000_pass1_cl_src5.gif
[Thu Jan  5 10:56:56 2012] Mean detx,y = (9282.97, -4425.57) 
[Thu Jan  5 10:57:01 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 10:57:48 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 10:57:50 2012] Setting source spectrum file to fullrun_pn_xmm0150900101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jan  5 10:57:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0150900101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Jan  5 12:43:17 2012] Updating aperture counts using extracted products
[Thu Jan  5 12:43:17 2012] Error reading totcts from fullrun_pn_xmm0150900101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jan  5 12:43:19 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan  5 12:43:19 2012] Using photon index=1.80, rate=0.0146, arf fullrun_pn_xmm0150900101_pi300-10000_pass1_cl_src5.arf
[Thu Jan  5 12:43:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan  5 12:43:19 2012] Updating source flux to 6.5e-14