[Thu Jan  5 05:59:53 2012] Detection parameters:
  Position = (327.5, 468.9) = 13 19 40.56 70 10 10.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.6 +/- 12.8
  Background counts = 13.5
  Rate = 0.007 +/- 0.001

[Thu Jan  5 05:59:54 2012] Off-axis axis estimate = 12.54'
[Thu Jan  5 07:48:32 2012] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 07:48:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan  5 07:48:32 2012] Initial guess for spatial extent in simple fitting = 12.70"
[Thu Jan  5 07:48:32 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.048
[Thu Jan  5 07:48:32 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 12.70"
[Thu Jan  5 08:29:50 2012] fullrun_mos2_xmm0150900101_pi300-10000_cl_pass0_src9.ximg exists
[Thu Jan  5 08:29:50 2012] fullrun_mos2_xmm0150900101_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Jan  5 08:29:50 2012] Fit fullrun_mos2_xmm0150900101_pi300-10000_cl_pass0_src9 appears to have run properly
[Thu Jan  5 08:29:50 2012] fullrun_mos2_xmm0150900101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Jan  5 08:29:50 2012] fullrun_mos2_xmm0150900101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Jan  5 08:29:50 2012] Fit fullrun_mos2_xmm0150900101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Jan  5 08:30:07 2012] Spatial fit model total counts = 106.723000, observed total counts = 107.000000
[Thu Jan  5 08:30:07 2012] Offset between fit and detection position for source 5 = 0.260653 pixels
[Thu Jan  5 08:30:07 2012] 107.739800 total counts/ 63.607800 bgd. counts: snr = 5.533481
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.260653 pixels
  Position = (327.3, 469.1) = 13 19 40.67 70 10 10.1
  Extent = 7.2 (5.3-9.8)" x 4.3 (2.9-5.8)", rotation angle = 14
  Source counts = 44.1 +/- 10.4
  Background counts = 63.6
  Rate = 0.006 +/- 0.001
[Thu Jan  5 08:30:07 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 08:30:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 08:30:07 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 08:30:07 2012] Source does appear to be extended
[Thu Jan  5 08:30:07 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.91
[Thu Jan  5 10:03:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 10:03:35 2012] Initial guess for spatial extent in simple fitting = 5.71"
[Thu Jan  5 10:03:35 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.913
[Thu Jan  5 10:03:35 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 5.71"
[Thu Jan  5 10:41:51 2012] fullrun_mos2_xmm0150900101_pi300-10000_cl_pass1_src9.ximg exists
[Thu Jan  5 10:41:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150900101_pi300-10000_cl_pass1_src9.csv
[Thu Jan  5 10:41:51 2012] fullrun_mos2_xmm0150900101_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Jan  5 10:41:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150900101_pi300-10000_cl_pass1_src9.csv
[Thu Jan  5 10:41:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150900101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150900101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 10:41:52 2012] fullrun_mos2_xmm0150900101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Jan  5 10:41:52 2012] fullrun_mos2_xmm0150900101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Jan  5 10:41:52 2012] Fit fullrun_mos2_xmm0150900101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Jan  5 10:42:09 2012] Spatial fit model total counts = 95.241200, observed total counts = 95.000000
[Thu Jan  5 10:42:09 2012] Offset between fit and detection position for source 5 = 0.158820 pixels
[Thu Jan  5 10:42:09 2012] 95.342600 total counts/ 52.281200 bgd. counts: snr = 5.955461
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.158820 pixels
  Position = (327.5, 469.1) = 13 19 40.53 70 10 9.9
  Extent = 5.5 (4.4-7.0)", rotation angle = 0
  Source counts = 43.1 +/- 9.8
  Background counts = 52.3
  Rate = 0.005 +/- 0.001
[Thu Jan  5 10:42:09 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 10:42:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 10:42:09 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 10:42:09 2012] Source does appear to be extended
[Thu Jan  5 10:42:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 12:18:49 2012] XMMSAS src. selection expression = ellipse(28444.209400, 40764.476800, 332.545810, 332.545810, 0.000000, X, Y)
[Thu Jan  5 12:18:49 2012] Writing source region out to fullrun_mos2_xmm0150900101_pi300-10000_pass1_cl_src5_src.reg
[Thu Jan  5 12:18:49 2012] Extracting stamp from image fullrun_mos2_xmm0150900101_pi300-10000_cl_sm2.00.img.gz, (308, 450) - (347, 488)
[Thu Jan  5 12:18:49 2012] XMMSAS bgd. selection expression = annulus(28444.209400, 40764.476800, 554.243016, 1108.486032, X, Y)
[Thu Jan  5 12:18:49 2012] Writing fullrun_mos2_xmm0150900101_pi300-10000_pass1_cl_src5.gif
[Thu Jan  5 12:23:35 2012] Mean detx,y = (-13640.48, -4310.37) 
[Thu Jan  5 12:23:38 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 12:23:51 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 12:23:51 2012] Setting source spectrum file to fullrun_mos2_xmm0150900101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jan  5 12:23:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0150900101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Jan  5 12:42:31 2012] Not generating rmf since there are only 43 counts
[Thu Jan  5 12:42:31 2012] rmf not generated due to insufficient counts
[Thu Jan  5 12:43:22 2012] Updating aperture counts using extracted products
[Thu Jan  5 12:43:22 2012] Error reading totcts from fullrun_mos2_xmm0150900101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jan  5 12:43:22 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan  5 12:43:22 2012] Using photon index=1.80, rate=0.00546, arf fullrun_mos2_xmm0150900101_pi300-10000_pass1_cl_src5.arf
[Thu Jan  5 12:43:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan  5 12:43:22 2012] Updating source flux to 1.5e-13
[Thu Jan  5 12:44:07 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting