[Thu May  9 18:01:03 2013] Detection parameters:
  Position = (374.4, 165.4) = 10 36 0.66 -3 51 15.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 201.5 +/- 16.9
  Background counts = 21.5
  Rate = 0.007 +/- 0.0006

[Thu May  9 18:01:04 2013] Off-axis axis estimate = 11.11'
[Thu May  9 18:02:47 2013] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Thu May  9 18:02:47 2013] Initial guess for spatial extent in simple fitting = 11.98"
[Thu May  9 18:02:47 2013] source mask rpix=2.8, npix_max = 42, mask sum = 37, frac = 0.873
[Thu May  9 18:02:47 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 11.98"
[Thu May  9 19:09:25 2013] fullrun_pn_xmm0150870401_pi300-10000_cl_pass0_src9.ximg exists
[Thu May  9 19:09:25 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0150870401_pi300-10000_cl_pass0_src9.csv
[Thu May  9 19:09:25 2013] fullrun_pn_xmm0150870401_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu May  9 19:09:25 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0150870401_pi300-10000_cl_pass0_src9.csv
[Thu May  9 19:09:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150870401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150870401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 19:09:26 2013] fullrun_pn_xmm0150870401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu May  9 19:09:26 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0150870401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu May  9 19:09:26 2013] fullrun_pn_xmm0150870401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu May  9 19:09:26 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0150870401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu May  9 19:09:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150870401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150870401_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 20:11:58 2013] Spatial fit model total counts = -112.731000, observed total counts = 341.000000
[Thu May  9 20:11:58 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  9 20:11:58 2013] Vigneting correction estimate = 1.000000
[Thu May  9 20:11:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 20:11:58 2013] Assessing source extent using major
[Thu May  9 20:11:58 2013] Source does appear to be extended
[Thu May  9 20:11:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 20:12:16 2013] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Thu May  9 20:12:16 2013] Initial guess for spatial extent in simple fitting = 11.98"
[Thu May  9 20:12:16 2013] source mask rpix=2.8, npix_max = 42, mask sum = 37, frac = 0.873
[Thu May  9 20:12:16 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 11.98"
[Thu May  9 21:06:23 2013] fullrun_pn_xmm0150870401_pi300-10000_cl_pass1_src9.ximg exists
[Thu May  9 21:06:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150870401_pi300-10000_cl_pass1_src9.csv
[Thu May  9 21:06:23 2013] fullrun_pn_xmm0150870401_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu May  9 21:06:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150870401_pi300-10000_cl_pass1_src9.csv
[Thu May  9 21:06:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150870401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150870401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 21:06:24 2013] fullrun_pn_xmm0150870401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu May  9 21:06:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150870401_pi300-10000_cl_pass1_tfrozen_src9.csv
[Thu May  9 21:06:24 2013] fullrun_pn_xmm0150870401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu May  9 21:06:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150870401_pi300-10000_cl_pass1_tfrozen_src9.csv
[Thu May  9 21:06:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150870401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150870401_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 22:05:05 2013] Warning, spatial fit 9 centroid is now closest to src. 7
[Thu May  9 22:05:05 2013] Vigneting correction estimate = 1.000000
[Thu May  9 22:05:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 22:05:05 2013] Assessing source extent using major
[Thu May  9 22:05:05 2013] Source does appear to be extended
[Thu May  9 22:05:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 22:05:23 2013] XMMSAS src. selection expression = ellipse(32525.738495, 14341.644623, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  9 22:05:23 2013] Writing source region out to fullrun_pn_xmm0150870401_pi300-10000_pass1_cl_src9_src.reg
[Thu May  9 22:05:23 2013] Extracting stamp from image fullrun_pn_xmm0150870401_pi300-10000_cl_sm2.00.img.gz, (337, 128) - (412, 203)
[Thu May  9 22:05:23 2013] XMMSAS bgd. selection expression = annulus(32525.738495, 14341.644623, 1087.500000, 2175.000000, X, Y) && !ellipse(33627.392456, 16297.693649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34974.254303, 15532.755814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30176.459717, 14283.405228, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  9 22:05:23 2013] Writing fullrun_pn_xmm0150870401_pi300-10000_pass1_cl_src9.gif
[Thu May  9 22:09:13 2013] Mean detx,y = (-1821.70, -11786.11) 
[Thu May  9 22:09:15 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 22:09:35 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 22:09:35 2013] Setting source spectrum file to fullrun_pn_xmm0150870401_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu May  9 22:09:35 2013] Setting bgd. spectrum file to fullrun_pn_xmm0150870401_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu May  9 22:35:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May  9 22:35:02 2013] rmf not generated due to insufficient counts
[Thu May  9 23:15:14 2013] Updating aperture counts using extracted products
[Thu May  9 23:15:14 2013] Total counts from fullrun_pn_xmm0150870401_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 282.00
[Thu May  9 23:15:14 2013] Total counts from fullrun_pn_xmm0150870401_pi300-10000_pass1_cl_src9_bgd.pi.gz = 844.00
[Thu May  9 23:15:14 2013] Got source and background scale factors 899763.000000, 7064800.000000
[Thu May  9 23:15:14 2013] User source parameters:
  Position = (374.4, 165.4) = 10 36 0.66 -3 51 15.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 174.5 +/- 17.8
  Background aperture counts = 107.5
  Rate = 0.006 +/- 0.0006

[Thu May  9 23:15:14 2013] Updating counts from extracted products
[Thu May  9 23:15:14 2013] Set source signif. to 174.51/10.37 = 16.83
[Thu May  9 23:15:20 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 23:15:20 2013] Using photon index=1.80, rate=0.00598, arf fullrun_pn_xmm0150870401_pi300-10000_pass1_cl_src9.arf
[Thu May  9 23:15:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 23:15:20 2013] Updating source flux to 1.9e-13
[Thu May  9 23:15:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  9 23:15:34 2013] xmm0150870401/analysis//spectral/fullrun_pn_xmm0150870401_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete