[Sun Aug  5 10:11:32 2012] Detection parameters:
  Position = (138.3, 394.0) = 1 7 0.05 0 56 13.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.6 +/- 15.4
  Background counts = 30.4
  Rate = 0.02 +/- 0.003

[Sun Aug  5 10:11:32 2012] Off-axis axis estimate = 13.52'
[Sun Aug  5 10:12:41 2012] Using EEF radius (= 13.19 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 10:12:41 2012] Initial guess for spatial extent in simple fitting = 13.19"
[Sun Aug  5 10:12:41 2012] source mask rpix=3.0, npix_max = 49, mask sum = 56, frac = 1.122
[Sun Aug  5 10:12:41 2012] Giving source the simple spatial ID 68 for pass 0, mean size = 13.19"
[Sun Aug  5 16:41:13 2012] fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_src68.ximg exists
[Sun Aug  5 16:41:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_src68.csv
[Sun Aug  5 16:41:13 2012] fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_src68_1.ximg exists
[Sun Aug  5 16:41:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_src68.csv
[Sun Aug  5 16:41:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 16:41:15 2012] fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Sun Aug  5 16:41:15 2012] fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Sun Aug  5 16:41:15 2012] Fit fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_tfrozen_src68 appears to have run properly
[Sun Aug  5 16:41:32 2012] Warning, spatial fit 68 centroid is now closest to src. 61
[Sun Aug  5 16:41:32 2012] Spatial fit model total counts = 975.940000, observed total counts = 974.000000
[Sun Aug  5 16:41:32 2012] Offset between fit and detection position for source 68 = 1.280091 pixels
[Sun Aug  5 16:41:32 2012] Warning, changing simple spatial fit ID from 68 to 69
[Sun Aug  5 16:41:32 2012] 968.824800 total counts/ 957.600000 bgd. counts: snr = 0.362733
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 1.280091 pixels
  Position = (138.3, 392.7) = 1 7 0.03 0 56 9.5
  Extent = 3.2" x 3.2", rotation angle = 0
  Source counts = 11.2 +/- 31.1
  Background counts = 957.6
  Rate = 0.002 +/- 0.006
  Deleting source due to low Poisson probability