[Sun Aug  5 10:11:32 2012] Detection parameters:
  Position = (193.9, 420.0) = 1 6 43.93 0 58 8.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.5 +/- 14.9
  Background counts = 36.9
  Rate = 0.01 +/- 0.003

[Sun Aug  5 10:11:32 2012] Off-axis axis estimate = 11.63'
[Sun Aug  5 10:12:41 2012] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 10:12:41 2012] Initial guess for spatial extent in simple fitting = 12.24"
[Sun Aug  5 10:12:41 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.819
[Sun Aug  5 10:12:41 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 12.24"
[Sun Aug  5 16:41:12 2012] fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_src44.ximg exists
[Sun Aug  5 16:41:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_src44.csv
[Sun Aug  5 16:41:12 2012] fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_src44_1.ximg exists
[Sun Aug  5 16:41:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_src44.csv
[Sun Aug  5 16:41:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 16:41:14 2012] fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Sun Aug  5 16:41:14 2012] fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Sun Aug  5 16:41:15 2012] Fit fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Sun Aug  5 16:41:32 2012] Warning, spatial fit 44 centroid is now closest to src. 30
[Sun Aug  5 16:41:32 2012] Spatial fit model total counts = 836.963000, observed total counts = 799.000000
[Sun Aug  5 16:41:32 2012] Offset between fit and detection position for source 44 = 2.950424 pixels
[Sun Aug  5 16:41:32 2012] Warning, changing simple spatial fit ID from 44 to 46
[Sun Aug  5 16:41:32 2012] 754.482100 total counts/ 743.954000 bgd. counts: snr = 0.385991
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 2.950424 pixels
  Position = (195.9, 417.9) = 1 6 43.34 0 57 59.1
  Extent = 5.6 (4.6-6.2)", rotation angle = 0
  Source counts = 10.5 +/- 27.5
  Background counts = 744.0
  Rate = 0.002 +/- 0.005
  Deleting source due to low Poisson probability