[Sun Aug 5 10:11:31 2012] Detection parameters: Position = (385.6, 426.1) = 1 5 48.31 0 58 31.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 34.8 +/- 9.9 Background counts = 9.6 Rate = 0.007 +/- 0.002 [Sun Aug 5 10:11:32 2012] Off-axis axis estimate = 11.21' [Sun Aug 5 10:12:41 2012] Using EEF radius (= 12.03 ")to estimate initial spatial extent for simple fitting [Sun Aug 5 10:12:41 2012] Initial guess for spatial extent in simple fitting = 12.03" [Sun Aug 5 10:12:41 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.984 [Sun Aug 5 10:12:41 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 12.03" [Sun Aug 5 16:41:12 2012] fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_src33.ximg exists [Sun Aug 5 16:41:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_src33.csv [Sun Aug 5 16:41:12 2012] fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_src33_1.ximg exists [Sun Aug 5 16:41:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_src33.csv [Sun Aug 5 16:41:12 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_src33_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Aug 5 16:41:14 2012] fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists [Sun Aug 5 16:41:14 2012] fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists [Sun Aug 5 16:41:14 2012] Fit fullrun_mos2_xmm0150870201_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly [Sun Aug 5 16:41:32 2012] Source 33 is offset by -1.484519 and -5.441365 pixels which is larger than 2 X fitted extent = 2.437614 x 2.437614, not incorporating fit results [Sun Aug 5 16:41:32 2012] Warning, spatial fit 33 centroid is now closest to src. 41 [Sun Aug 5 16:41:32 2012] Vigneting correction estimate = 1.000000 [Sun Aug 5 16:41:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Aug 5 16:41:32 2012] Assessing source extent using major [Sun Aug 5 16:41:32 2012] Source does appear to be extended [Sun Aug 5 16:41:32 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Aug 5 16:41:32 2012] Source is confused with source 41 [Sun Aug 5 16:41:39 2012] Using EEF radius (= 12.03 ")to estimate initial spatial extent for simple fitting [Sun Aug 5 16:41:39 2012] Initial guess for spatial extent in simple fitting = 12.03" [Sun Aug 5 16:41:39 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.984 [Sun Aug 5 16:41:39 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 12.03" [Mon Aug 6 01:29:24 2012] fullrun_mos2_xmm0150870201_pi300-10000_cl_pass1_src25.ximg exists [Mon Aug 6 01:29:24 2012] fullrun_mos2_xmm0150870201_pi300-10000_cl_pass1_src25_1.ximg exists [Mon Aug 6 01:29:24 2012] Fit fullrun_mos2_xmm0150870201_pi300-10000_cl_pass1_src25 appears to have run properly [Mon Aug 6 01:29:26 2012] fullrun_mos2_xmm0150870201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists [Mon Aug 6 01:29:26 2012] fullrun_mos2_xmm0150870201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists [Mon Aug 6 01:29:26 2012] Fit fullrun_mos2_xmm0150870201_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly [Mon Aug 6 01:29:41 2012] Source 33 is offset by -1.989316 and 2.575222 pixels which is larger than 2 X fitted extent = 1.417140 x 1.417140, not incorporating fit results [Mon Aug 6 01:29:41 2012] Source 33 is offset by -1.409466 and -5.539376 pixels which is larger than 2 X fitted extent = 2.573977 x 2.573977, not incorporating fit results [Mon Aug 6 01:29:41 2012] Vigneting correction estimate = 1.000000 [Mon Aug 6 01:29:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Aug 6 01:29:41 2012] Assessing source extent using major [Mon Aug 6 01:29:41 2012] Source does appear to be extended [Mon Aug 6 01:29:41 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Aug 6 01:29:48 2012] XMMSAS src. selection expression = ellipse(33500.763489, 37024.842285, 652.500000, 652.500000, 0.000000, X, Y) [Mon Aug 6 01:29:48 2012] Writing source region out to fullrun_mos2_xmm0150870201_pi300-10000_pass1_cl_src33_src.reg [Mon Aug 6 01:29:48 2012] Extracting stamp from image fullrun_mos2_xmm0150870201_pi300-10000_cl_sm2.00.img.gz, (348, 389) - (423, 464) [Mon Aug 6 01:29:48 2012] XMMSAS bgd. selection expression = annulus(33500.763489, 37024.842285, 1087.500000, 2175.000000, X, Y) && !ellipse(32907.385681, 38668.828461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32301.926000, 39173.418000, 1998.184057, 1998.184057, 0.000000, X, Y) && !ellipse(31262.610000, 39245.310000, 1973.824057, 1973.824057, 0.000000, X, Y) && !ellipse(33425.172000, 38365.718000, 1998.184057, 1998.184057, 0.000000, X, Y) && !ellipse(33082.840000, 38358.638000, 3574.568103, 3574.568103, 0.000000, X, Y) && !ellipse(32588.277710, 38062.794128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35357.481232, 37952.761749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33057.086853, 37712.404602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34641.757019, 37704.744843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34724.989532, 37216.487610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35764.635284, 37091.016235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31183.858000, 37354.466600, 1287.120037, 1287.120037, 0.000000, X, Y) && !ellipse(36099.292000, 36408.512000, 2016.248058, 2016.248058, 0.000000, X, Y) && !ellipse(32595.326813, 36929.701965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33683.180000, 35802.830000, 1942.568056, 1942.568056, 0.000000, X, Y) && !ellipse(34995.587463, 36378.717010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32195.096000, 36759.256000, 1641.784047, 1641.784047, 0.000000, X, Y) [Mon Aug 6 01:29:48 2012] Writing fullrun_mos2_xmm0150870201_pi300-10000_pass1_cl_src33.gif [Mon Aug 6 01:37:24 2012] Mean detx,y = (4026.40, -14767.82) [Mon Aug 6 01:37:25 2012] Setting backscal keywords in source and bgd. spectrum [Mon Aug 6 01:37:34 2012] Binned source spectrum to 10 counts/bin [Mon Aug 6 01:37:34 2012] Setting source spectrum file to fullrun_mos2_xmm0150870201_pi300-10000_pass1_cl_src33_src_b10.pi.gz [Mon Aug 6 01:37:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0150870201_pi300-10000_pass1_cl_src33_bgd.pi.gz [Mon Aug 6 01:46:25 2012] Not generating rmf since there are only 34 counts [Mon Aug 6 01:46:25 2012] rmf not generated due to insufficient counts [Mon Aug 6 01:47:24 2012] Updating aperture counts using extracted products [Mon Aug 6 01:47:24 2012] Error reading totcts from fullrun_mos2_xmm0150870201_pi300-10000_pass1_cl_src33_src_b10.pi.gz [Mon Aug 6 01:47:24 2012] No arf file for this source, not re-computing flux [Mon Aug 6 01:47:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon Aug 6 01:47:26 2012] xmm0150870201/analysis//spectral/fullrun_mos2_xmm0150870201_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete