[Fri Sep 30 02:14:26 2011] Detection parameters:
  Position = (244.4, 442.2) = 13 29 55.58 58 34 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.9 +/- 8.6
  Background counts = 10.1
  Rate = 0.003 +/- 0.0008

[Fri Sep 30 02:14:26 2011] Off-axis axis estimate = 11.13'
[Fri Sep 30 02:45:46 2011] Using EEF radius (= 12.00 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 02:45:46 2011] Initial guess for spatial extent in simple fitting = 12.00"
[Fri Sep 30 02:45:46 2011] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.989
[Fri Sep 30 02:45:46 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 12.00"
[Fri Sep 30 02:55:27 2011] fullrun_mos2_xmm0150650301_pi300-10000_cl_pass0_src6.ximg exists
[Fri Sep 30 02:55:27 2011] fullrun_mos2_xmm0150650301_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Sep 30 02:55:27 2011] Fit fullrun_mos2_xmm0150650301_pi300-10000_cl_pass0_src6 appears to have run properly
[Fri Sep 30 02:55:27 2011] fullrun_mos2_xmm0150650301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Sep 30 02:55:27 2011] fullrun_mos2_xmm0150650301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Sep 30 02:55:27 2011] Fit fullrun_mos2_xmm0150650301_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Sep 30 02:55:33 2011] Spatial fit model total counts = 72.999700, observed total counts = 73.000000
[Fri Sep 30 02:55:33 2011] Offset between fit and detection position for source 6 = 0.470864 pixels
[Fri Sep 30 02:55:33 2011] 71.839600 total counts/ 49.373500 bgd. counts: snr = 3.197280
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.470864 pixels
  Position = (244.0, 442.0) = 13 29 55.82 58 34 38.7
  Extent = 4.6 (3.0-6.6)", rotation angle = 0
  Source counts = 22.5 +/- 8.5
  Background counts = 49.4
  Rate = 0.003 +/- 0.001
[Fri Sep 30 02:55:33 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 02:55:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 02:55:33 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 02:55:33 2011] Source does appear to be extended
[Fri Sep 30 02:55:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 03:29:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 03:29:12 2011] Initial guess for spatial extent in simple fitting = 4.57"
[Fri Sep 30 03:29:12 2011] source mask rpix=1.1, npix_max = 9, mask sum = 16, frac = 1.661
[Fri Sep 30 03:29:12 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 4.57"
[Fri Sep 30 03:37:19 2011] fullrun_mos2_xmm0150650301_pi300-10000_cl_pass1_src6.ximg exists
[Fri Sep 30 03:37:19 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0150650301_pi300-10000_cl_pass1_src6.csv
[Fri Sep 30 03:37:19 2011] fullrun_mos2_xmm0150650301_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Sep 30 03:37:19 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0150650301_pi300-10000_cl_pass1_src6.csv
[Fri Sep 30 03:37:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150650301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150650301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 03:37:19 2011] fullrun_mos2_xmm0150650301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Sep 30 03:37:19 2011] fullrun_mos2_xmm0150650301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Sep 30 03:37:19 2011] Fit fullrun_mos2_xmm0150650301_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Sep 30 03:37:23 2011] Warning, spatial fit 6 centroid is now closest to src. 7
[Fri Sep 30 03:37:23 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 03:37:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 03:37:23 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 03:37:23 2011] Source does appear to be extended
[Fri Sep 30 03:37:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 04:05:22 2011] XMMSAS src. selection expression = ellipse(21179.347600, 38406.780600, 274.484408, 274.484408, 0.000000, X, Y)
[Fri Sep 30 04:05:22 2011] Writing source region out to fullrun_mos2_xmm0150650301_pi300-10000_pass1_cl_src6_src.reg
[Fri Sep 30 04:05:22 2011] Extracting stamp from image fullrun_mos2_xmm0150650301_pi300-10000_cl_sm2.00.img.gz, (228, 426) - (260, 458)
[Fri Sep 30 04:05:22 2011] XMMSAS bgd. selection expression = annulus(21179.347600, 38406.780600, 457.474013, 914.948026, X, Y)
[Fri Sep 30 04:05:22 2011] Writing fullrun_mos2_xmm0150650301_pi300-10000_pass1_cl_src6.gif
[Fri Sep 30 04:06:46 2011] Mean detx,y = (-11402.21, 2808.32) 
[Fri Sep 30 04:06:48 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 04:06:54 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 04:06:54 2011] Setting source spectrum file to fullrun_mos2_xmm0150650301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Sep 30 04:06:54 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0150650301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Sep 30 04:12:21 2011] Not generating rmf since there are only 22 counts
[Fri Sep 30 04:12:21 2011] rmf not generated due to insufficient counts
[Fri Sep 30 04:12:41 2011] Updating aperture counts using extracted products
[Fri Sep 30 04:12:41 2011] Error reading totcts from fullrun_mos2_xmm0150650301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Sep 30 04:12:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 04:12:41 2011] Using photon index=1.80, rate=0.00258, arf fullrun_mos2_xmm0150650301_pi300-10000_pass1_cl_src6.arf
[Fri Sep 30 04:12:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 04:12:41 2011] Updating source flux to 6.9e-14
[Fri Sep 30 04:12:50 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting