[Fri Sep 30 02:14:26 2011] Detection parameters:
  Position = (323.0, 194.3) = 13 29 11.97 58 16 41.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.5 +/- 8.8
  Background counts = 9.9
  Rate = 0.004 +/- 0.0008

[Fri Sep 30 02:14:26 2011] Off-axis axis estimate = 7.76'
[Fri Sep 30 02:45:46 2011] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 02:45:46 2011] Initial guess for spatial extent in simple fitting = 10.31"
[Fri Sep 30 02:45:46 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.093
[Fri Sep 30 02:45:46 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 10.31"
[Fri Sep 30 02:55:27 2011] fullrun_mos2_xmm0150650301_pi300-10000_cl_pass0_src4.ximg exists
[Fri Sep 30 02:55:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150650301_pi300-10000_cl_pass0_src4.csv
[Fri Sep 30 02:55:27 2011] fullrun_mos2_xmm0150650301_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Sep 30 02:55:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150650301_pi300-10000_cl_pass0_src4.csv
[Fri Sep 30 02:55:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150650301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150650301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 02:55:27 2011] fullrun_mos2_xmm0150650301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Sep 30 02:55:27 2011] fullrun_mos2_xmm0150650301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Sep 30 02:55:27 2011] Fit fullrun_mos2_xmm0150650301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Sep 30 02:55:33 2011] Spatial fit model total counts = 54.997700, observed total counts = 55.000000
[Fri Sep 30 02:55:33 2011] Offset between fit and detection position for source 4 = 0.437317 pixels
[Fri Sep 30 02:55:33 2011] 54.258300 total counts/ 29.848300 bgd. counts: snr = 4.467947
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.437317 pixels
  Position = (323.5, 194.3) = 13 29 11.73 58 16 41.3
  Extent = 6.2 (4.2-8.8)", rotation angle = 0
  Source counts = 24.4 +/- 7.4
  Background counts = 29.8
  Rate = 0.003 +/- 0.0008
[Fri Sep 30 02:55:33 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 02:55:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 02:55:33 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 02:55:33 2011] Source does appear to be extended
[Fri Sep 30 02:55:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 03:29:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 03:29:12 2011] Initial guess for spatial extent in simple fitting = 6.19"
[Fri Sep 30 03:29:12 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.812
[Fri Sep 30 03:29:12 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 6.19"
[Fri Sep 30 03:37:19 2011] fullrun_mos2_xmm0150650301_pi300-10000_cl_pass1_src4.ximg exists
[Fri Sep 30 03:37:19 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0150650301_pi300-10000_cl_pass1_src4.csv
[Fri Sep 30 03:37:19 2011] fullrun_mos2_xmm0150650301_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Sep 30 03:37:19 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0150650301_pi300-10000_cl_pass1_src4.csv
[Fri Sep 30 03:37:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150650301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150650301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 03:37:19 2011] fullrun_mos2_xmm0150650301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Sep 30 03:37:19 2011] fullrun_mos2_xmm0150650301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Sep 30 03:37:19 2011] Fit fullrun_mos2_xmm0150650301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Sep 30 03:37:23 2011] Spatial fit model total counts = 54.995700, observed total counts = 55.000000
[Fri Sep 30 03:37:23 2011] Offset between fit and detection position for source 4 = 0.008286 pixels
[Fri Sep 30 03:37:23 2011] 54.256700 total counts/ 30.084400 bgd. counts: snr = 4.407043
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.008286 pixels
  Position = (323.5, 194.3) = 13 29 11.73 58 16 41.3
  Extent = 6.1 (4.2-8.8)", rotation angle = 0
  Source counts = 24.2 +/- 7.4
  Background counts = 30.1
  Rate = 0.003 +/- 0.0008
[Fri Sep 30 03:37:23 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 03:37:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 03:37:23 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 03:37:23 2011] Source does appear to be extended
[Fri Sep 30 03:37:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 04:05:22 2011] XMMSAS src. selection expression = ellipse(28094.124000, 16853.665200, 365.041211, 365.041211, 0.000000, X, Y)
[Fri Sep 30 04:05:22 2011] Writing source region out to fullrun_mos2_xmm0150650301_pi300-10000_pass1_cl_src4_src.reg
[Fri Sep 30 04:05:22 2011] Extracting stamp from image fullrun_mos2_xmm0150650301_pi300-10000_cl_sm2.00.img.gz, (302, 173) - (344, 215)
[Fri Sep 30 04:05:22 2011] XMMSAS bgd. selection expression = annulus(28094.124000, 16853.665200, 608.402018, 1216.804035, X, Y)
[Fri Sep 30 04:05:22 2011] Writing fullrun_mos2_xmm0150650301_pi300-10000_pass1_cl_src4.gif
[Fri Sep 30 04:06:10 2011] Mean detx,y = (10313.29, -3594.06) 
[Fri Sep 30 04:06:12 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 04:06:20 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 04:06:20 2011] Setting source spectrum file to fullrun_mos2_xmm0150650301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Sep 30 04:06:20 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0150650301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Sep 30 04:12:16 2011] Not generating rmf since there are only 24 counts
[Fri Sep 30 04:12:16 2011] rmf not generated due to insufficient counts
[Fri Sep 30 04:12:41 2011] Updating aperture counts using extracted products
[Fri Sep 30 04:12:41 2011] Error reading totcts from fullrun_mos2_xmm0150650301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Sep 30 04:12:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 04:12:41 2011] Using photon index=1.80, rate=0.00278, arf fullrun_mos2_xmm0150650301_pi300-10000_pass1_cl_src4.arf
[Fri Sep 30 04:12:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 04:12:41 2011] Updating source flux to 6.3e-14
[Fri Sep 30 04:12:50 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting