[Wed May 16 03:21:23 2012] Detection parameters:
  Position = (269.2, 303.1) = 9 20 19.41 30 28 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.6 +/- 12.4
  Background counts = 34.3
  Rate = 0.004 +/- 0.001

[Wed May 16 03:21:23 2012] Off-axis axis estimate = 2.15'
[Wed May 16 03:25:10 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Wed May 16 03:25:10 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Wed May 16 03:25:10 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.808
[Wed May 16 03:25:10 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 7.50"
[Wed May 16 06:54:31 2012] fullrun_pn_xmm0150620201_pi300-10000_cl_pass0_src55.ximg exists
[Wed May 16 06:54:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150620201_pi300-10000_cl_pass0_src55.csv
[Wed May 16 06:54:31 2012] fullrun_pn_xmm0150620201_pi300-10000_cl_pass0_src55_1.ximg exists
[Wed May 16 06:54:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150620201_pi300-10000_cl_pass0_src55.csv
[Wed May 16 06:54:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150620201_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150620201_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 06:54:33 2012] fullrun_pn_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Wed May 16 06:54:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src55.csv
[Wed May 16 06:54:33 2012] fullrun_pn_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Wed May 16 06:54:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src55.csv
[Wed May 16 06:54:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 12:56:56 2012] Source 58 is offset by -0.187097 and 1.812559 pixels which is larger than
2 X fitted extent = 1.304998 x 1.304998, not incorporating fit results
[Wed May 16 12:56:56 2012] Vigneting correction estimate = 1.000000
[Wed May 16 12:56:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 12:56:56 2012] Assessing source extent using major
[Wed May 16 12:56:56 2012] Source does appear to be extended
[Wed May 16 12:56:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 12:57:51 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Wed May 16 12:57:51 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Wed May 16 12:57:51 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.808
[Wed May 16 12:57:51 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 7.50"
[Wed May 16 17:35:59 2012] fullrun_pn_xmm0150620201_pi300-10000_cl_pass1_src52.ximg exists
[Wed May 16 17:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150620201_pi300-10000_cl_pass1_src52.csv
[Wed May 16 17:35:59 2012] fullrun_pn_xmm0150620201_pi300-10000_cl_pass1_src52_1.ximg exists
[Wed May 16 17:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150620201_pi300-10000_cl_pass1_src52.csv
[Wed May 16 17:35:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150620201_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150620201_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 17:36:01 2012] fullrun_pn_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Wed May 16 17:36:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src52.csv
[Wed May 16 17:36:01 2012] fullrun_pn_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Wed May 16 17:36:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src52.csv
[Wed May 16 17:36:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 22:41:16 2012] Source 58 is offset by -0.738501 and -4.790568 pixels which is larger than
2 X fitted extent = 0.893439 x 0.893439, not incorporating fit results
[Wed May 16 22:41:16 2012] Source 58 is offset by 1.667338 and -1.119430 pixels which is larger than
2 X fitted extent = 5.529931 x 0.862460, not incorporating fit results
[Wed May 16 22:41:16 2012] Vigneting correction estimate = 1.000000
[Wed May 16 22:41:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 22:41:16 2012] Assessing source extent using major
[Wed May 16 22:41:16 2012] Source does appear to be extended
[Wed May 16 22:41:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 22:42:05 2012] XMMSAS src. selection expression = ellipse(23367.950378, 26320.722626, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 16 22:42:05 2012] Writing source region out to fullrun_pn_xmm0150620201_pi300-10000_pass1_cl_src58_src.reg
[Wed May 16 22:42:05 2012] Extracting stamp from image fullrun_pn_xmm0150620201_pi300-10000_cl_sm2.00.img.gz, (232, 266) - (307, 341)
[Wed May 16 22:42:05 2012] XMMSAS bgd. selection expression = annulus(23367.950378, 26320.722626, 1087.500000, 2175.000000, X, Y) && !ellipse(21544.102000, 29082.412000, 1378.416040, 1378.416040, 0.000000, X, Y) && !ellipse(20940.674000, 28358.172000, 1399.624040, 1399.624040, 0.000000, X, Y) && !ellipse(21896.777405, 28307.950989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21323.930000, 28377.398000, 1720.712050, 1720.712050, 0.000000, X, Y) && !ellipse(22438.169739, 28390.729492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21314.845000, 27834.516000, 2752.456079, 2752.456079, 0.000000, X, Y) && !ellipse(21477.424800, 27516.513200, 1329.000038, 1329.000038, 0.000000, X, Y) && !ellipse(26298.993866, 28335.730560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25575.720000, 27677.297800, 1483.168043, 829.016024, 24.074000, X, Y) && !ellipse(24362.001312, 27481.249207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25396.116000, 27832.786000, 1136.768033, 1136.768033, 0.000000, X, Y) && !ellipse(23808.847198, 27300.024872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22878.662994, 27005.364410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22022.633759, 26753.585327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21541.599533, 26319.243774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25560.882446, 25448.338409, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 16 22:42:05 2012] Writing fullrun_pn_xmm0150620201_pi300-10000_pass1_cl_src58.gif
[Wed May 16 23:53:06 2012] Mean detx,y = (-3163.31, 99.03) 
[Wed May 16 23:53:12 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 16 23:53:49 2012] Binned source spectrum to 10 counts/bin
[Wed May 16 23:53:49 2012] Setting source spectrum file to fullrun_pn_xmm0150620201_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Wed May 16 23:53:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0150620201_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Thu May 17 01:18:38 2012] Not generating rmf since there are only 47 counts
[Thu May 17 01:18:38 2012] rmf not generated due to insufficient counts
[Thu May 17 02:55:44 2012] Updating aperture counts using extracted products
[Thu May 17 02:55:44 2012] Error reading totcts from fullrun_pn_xmm0150620201_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Thu May 17 02:55:47 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 02:55:47 2012] Using photon index=1.80, rate=0.00421, arf fullrun_pn_xmm0150620201_pi300-10000_pass1_cl_src58.arf
[Thu May 17 02:55:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 02:55:47 2012] Updating source flux to 1.4e-14
[Thu May 17 02:58:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting