[Wed May 16 03:21:22 2012] Detection parameters:
  Position = (237.5, 349.0) = 9 20 30.08 30 31 54.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.1 +/- 12.2
  Background counts = 28.5
  Rate = 0.006 +/- 0.001

[Wed May 16 03:21:23 2012] Off-axis axis estimate = 5.74'
[Wed May 16 03:25:10 2012] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Wed May 16 03:25:10 2012] Initial guess for spatial extent in simple fitting = 9.30"
[Wed May 16 03:25:10 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.078
[Wed May 16 03:25:10 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 9.30"
[Wed May 16 06:54:31 2012] fullrun_pn_xmm0150620201_pi300-10000_cl_pass0_src42.ximg exists
[Wed May 16 06:54:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150620201_pi300-10000_cl_pass0_src42.csv
[Wed May 16 06:54:31 2012] fullrun_pn_xmm0150620201_pi300-10000_cl_pass0_src42_1.ximg exists
[Wed May 16 06:54:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150620201_pi300-10000_cl_pass0_src42.csv
[Wed May 16 06:54:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150620201_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150620201_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 06:54:33 2012] fullrun_pn_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Wed May 16 06:54:33 2012] fullrun_pn_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Wed May 16 06:54:33 2012] Fit fullrun_pn_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Wed May 16 12:56:56 2012] Spatial fit model total counts = 470.398000, observed total counts = 462.000000
[Wed May 16 12:56:56 2012] Offset between fit and detection position for source 45 = 0.914172 pixels
[Wed May 16 12:56:56 2012] 463.437200 total counts/ 402.333000 bgd. counts: snr = 3.046339
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.914172 pixels
  Position = (238.3, 349.3) = 9 20 29.80 30 31 54.3
  Extent = 10.9 (2.3-18.6)", rotation angle = 0
  Source counts = 61.1 +/- 21.5
  Background counts = 402.3
  Rate = 0.004 +/- 0.001
[Wed May 16 12:56:56 2012] Vigneting correction estimate = 1.000000
[Wed May 16 12:56:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 12:56:56 2012] Assessing source extent using major axis lower bound
[Wed May 16 12:56:56 2012] Source does appear to be extended
[Wed May 16 12:56:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 12:57:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 16 12:57:51 2012] Initial guess for spatial extent in simple fitting = 10.93"
[Wed May 16 12:57:51 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Wed May 16 12:57:51 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 10.93"
[Wed May 16 17:35:59 2012] fullrun_pn_xmm0150620201_pi300-10000_cl_pass1_src41.ximg exists
[Wed May 16 17:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150620201_pi300-10000_cl_pass1_src41.csv
[Wed May 16 17:35:59 2012] fullrun_pn_xmm0150620201_pi300-10000_cl_pass1_src41_1.ximg exists
[Wed May 16 17:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150620201_pi300-10000_cl_pass1_src41.csv
[Wed May 16 17:35:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150620201_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150620201_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 17:36:01 2012] fullrun_pn_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Wed May 16 17:36:01 2012] fullrun_pn_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Wed May 16 17:36:01 2012] Fit fullrun_pn_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Wed May 16 22:41:16 2012] Warning, spatial fit 41 centroid is now closest to src. 47
[Wed May 16 22:41:16 2012] Vigneting correction estimate = 1.000000
[Wed May 16 22:41:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 22:41:16 2012] Assessing source extent using major axis lower bound
[Wed May 16 22:41:16 2012] Source does appear to be extended
[Wed May 16 22:41:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 22:42:05 2012] XMMSAS src. selection expression = ellipse(20685.700000, 30339.432200, 655.974019, 655.974019, 0.000000, X, Y)
[Wed May 16 22:42:05 2012] Writing source region out to fullrun_pn_xmm0150620201_pi300-10000_pass1_cl_src45_src.reg
[Wed May 16 22:42:05 2012] Extracting stamp from image fullrun_pn_xmm0150620201_pi300-10000_cl_sm2.00.img.gz, (201, 312) - (276, 387)
[Wed May 16 22:42:05 2012] XMMSAS bgd. selection expression = annulus(20685.700000, 30339.432200, 1093.290031, 2186.580063, X, Y) && !ellipse(21544.102000, 29082.412000, 1378.416040, 1378.416040, 0.000000, X, Y) && !ellipse(20940.674000, 28358.172000, 1399.624040, 1399.624040, 0.000000, X, Y) && !ellipse(21896.777405, 28307.950989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21323.930000, 28377.398000, 1720.712050, 1720.712050, 0.000000, X, Y) && !ellipse(22438.169739, 28390.729492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21314.845000, 27834.516000, 2752.456079, 2752.456079, 0.000000, X, Y) && !ellipse(21477.424800, 27516.513200, 1329.000038, 1329.000038, 0.000000, X, Y) && !ellipse(17942.563950, 28809.039978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21405.894348, 30294.457184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21905.592102, 29675.105225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20738.003143, 29608.551605, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 16 22:42:05 2012] Writing fullrun_pn_xmm0150620201_pi300-10000_pass1_cl_src45.gif
[Wed May 16 23:42:28 2012] Mean detx,y = (-4273.43, -4511.94) 
[Wed May 16 23:42:31 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 16 23:43:06 2012] Binned source spectrum to 10 counts/bin
[Wed May 16 23:43:07 2012] Setting source spectrum file to fullrun_pn_xmm0150620201_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Wed May 16 23:43:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0150620201_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Thu May 17 00:48:25 2012] Not generating rmf since there are only 61 counts
[Thu May 17 00:48:25 2012] rmf not generated due to insufficient counts
[Thu May 17 02:55:44 2012] Updating aperture counts using extracted products
[Thu May 17 02:55:44 2012] Error reading totcts from fullrun_pn_xmm0150620201_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Thu May 17 02:55:47 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 02:55:47 2012] Using photon index=1.80, rate=0.00421, arf fullrun_pn_xmm0150620201_pi300-10000_pass1_cl_src45.arf
[Thu May 17 02:55:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 02:55:47 2012] Updating source flux to 1.6e-14
[Thu May 17 02:58:00 2012] Source 45 has fewer than 100.000000 counts, skipping spectral fitting