[Wed May 16 03:23:03 2012] Detection parameters:
  Position = (438.2, 372.6) = 9 19 22.50 30 33 34.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.2 +/- 8.2
  Background counts = 4.5
  Rate = 0.005 +/- 0.001

[Wed May 16 03:23:04 2012] Off-axis axis estimate = 11.47'
[Wed May 16 09:31:42 2012] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Wed May 16 09:31:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 16 09:31:42 2012] Initial guess for spatial extent in simple fitting = 12.16"
[Wed May 16 09:31:42 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.966
[Wed May 16 09:31:42 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 12.16"
[Wed May 16 12:56:30 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_src18.ximg exists
[Wed May 16 12:56:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_src18.csv
[Wed May 16 12:56:30 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed May 16 12:56:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_src18.csv
[Wed May 16 12:56:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 12:56:31 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed May 16 12:56:31 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed May 16 12:56:31 2012] Fit fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Wed May 16 12:57:26 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 16.029610 pixels away
[Wed May 16 12:57:26 2012] Vigneting correction estimate = 1.000000
[Wed May 16 12:57:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 12:57:26 2012] Assessing source extent using major
[Wed May 16 12:57:26 2012] Source does appear to be extended
[Wed May 16 12:57:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 20:01:47 2012] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Wed May 16 20:01:47 2012] Initial guess for spatial extent in simple fitting = 12.16"
[Wed May 16 20:01:47 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.966
[Wed May 16 20:01:47 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 12.16"
[Wed May 16 22:40:51 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_src17.ximg exists
[Wed May 16 22:40:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_src17.csv
[Wed May 16 22:40:51 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed May 16 22:40:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_src17.csv
[Wed May 16 22:40:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 22:40:51 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed May 16 22:40:51 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed May 16 22:40:51 2012] Fit fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Wed May 16 22:41:39 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 15.986070 pixels away
[Wed May 16 22:41:39 2012] Vigneting correction estimate = 1.000000
[Wed May 16 22:41:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 22:41:39 2012] Assessing source extent using major
[Wed May 16 22:41:39 2012] Source does appear to be extended
[Wed May 16 22:41:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 02:02:35 2012] XMMSAS src. selection expression = ellipse(38072.450470, 32371.406952, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 17 02:02:35 2012] Writing source region out to fullrun_mos2_xmm0150620201_pi300-10000_pass1_cl_src27_src.reg
[Thu May 17 02:02:35 2012] Extracting stamp from image fullrun_mos2_xmm0150620201_pi300-10000_cl_sm2.00.img.gz, (401, 335) - (476, 410)
[Thu May 17 02:02:35 2012] XMMSAS bgd. selection expression = annulus(38072.450470, 32371.406952, 1087.500000, 2175.000000, X, Y) && !ellipse(34854.252800, 30407.978000, 1053.656030, 1053.656030, 0.000000, X, Y) && !ellipse(40526.077200, 33609.671000, 596.941729, 596.941729, 0.000000, X, Y)
[Thu May 17 02:02:35 2012] Writing fullrun_mos2_xmm0150620201_pi300-10000_pass1_cl_src27.gif
[Thu May 17 02:14:46 2012] Mean detx,y = (-12423.16, -45.61) 
[Thu May 17 02:14:48 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 02:15:06 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 02:15:06 2012] Setting source spectrum file to fullrun_mos2_xmm0150620201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu May 17 02:15:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0150620201_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Thu May 17 02:41:46 2012] Not generating rmf since there are only 38 counts
[Thu May 17 02:41:46 2012] rmf not generated due to insufficient counts
[Thu May 17 02:55:53 2012] Updating aperture counts using extracted products
[Thu May 17 02:55:53 2012] Error reading totcts from fullrun_mos2_xmm0150620201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu May 17 02:55:54 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 02:55:54 2012] Using photon index=1.80, rate=0.00466, arf fullrun_mos2_xmm0150620201_pi300-10000_pass1_cl_src27.arf
[Thu May 17 02:55:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 02:55:54 2012] Updating source flux to 9.1e-14
[Thu May 17 02:56:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting