[Wed May 16 03:23:03 2012] Detection parameters:
  Position = (116.7, 287.4) = 9 21 10.70 30 27 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.8 +/- 8.0
  Background counts = 4.1
  Rate = 0.002 +/- 0.0005

[Wed May 16 03:23:04 2012] Off-axis axis estimate = 13.20'
[Wed May 16 09:31:42 2012] Using EEF radius (= 13.03 ")to estimate initial spatial extent for simple fitting
[Wed May 16 09:31:42 2012] Initial guess for spatial extent in simple fitting = 13.03"
[Wed May 16 09:31:42 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.003
[Wed May 16 09:31:42 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 13.03"
[Wed May 16 12:56:31 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_src44.ximg exists
[Wed May 16 12:56:31 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_src44_1.ximg exists
[Wed May 16 12:56:31 2012] Fit fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_src44 appears to have run properly
[Wed May 16 12:56:32 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Wed May 16 12:56:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src44.csv
[Wed May 16 12:56:32 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Wed May 16 12:56:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src44.csv
[Wed May 16 12:56:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 12:57:26 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 15.229318 pixels away
[Wed May 16 12:57:26 2012] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 17.835409 pixels away
[Wed May 16 12:57:26 2012] Vigneting correction estimate = 1.000000
[Wed May 16 12:57:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 12:57:26 2012] Assessing source extent using major
[Wed May 16 12:57:26 2012] Source does appear to be extended
[Wed May 16 12:57:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 20:01:47 2012] Using EEF radius (= 13.03 ")to estimate initial spatial extent for simple fitting
[Wed May 16 20:01:47 2012] Initial guess for spatial extent in simple fitting = 13.03"
[Wed May 16 20:01:47 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.003
[Wed May 16 20:01:47 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 13.03"
[Wed May 16 22:40:51 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_src38.ximg exists
[Wed May 16 22:40:51 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_src38_1.ximg exists
[Wed May 16 22:40:51 2012] Fit fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_src38 appears to have run properly
[Wed May 16 22:40:52 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Wed May 16 22:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src38.csv
[Wed May 16 22:40:52 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Wed May 16 22:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src38.csv
[Wed May 16 22:40:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 22:41:39 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 15.229318 pixels away
[Wed May 16 22:41:39 2012] Warning, spatial fit 38 centroid is now closest to src. 18
[Wed May 16 22:41:39 2012] Vigneting correction estimate = 1.000000
[Wed May 16 22:41:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 22:41:39 2012] Assessing source extent using major
[Wed May 16 22:41:39 2012] Source does appear to be extended
[Wed May 16 22:41:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 02:02:36 2012] XMMSAS src. selection expression = ellipse(10104.480049, 24958.674011, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 17 02:02:36 2012] Writing source region out to fullrun_mos2_xmm0150620201_pi300-10000_pass1_cl_src19_src.reg
[Thu May 17 02:02:36 2012] Extracting stamp from image fullrun_mos2_xmm0150620201_pi300-10000_cl_sm2.00.img.gz, (79, 250) - (154, 325)
[Thu May 17 02:02:36 2012] XMMSAS bgd. selection expression = annulus(10104.480049, 24958.674011, 1087.500000, 2175.000000, X, Y) && !ellipse(11055.387421, 25200.196716, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 17 02:02:36 2012] Writing fullrun_mos2_xmm0150620201_pi300-10000_pass1_cl_src19.gif
[Thu May 17 02:23:59 2012] Mean detx,y = (16146.23, 3309.26) 
[Thu May 17 02:24:02 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 02:24:27 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 02:24:27 2012] Setting source spectrum file to fullrun_mos2_xmm0150620201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu May 17 02:24:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0150620201_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu May 17 02:50:57 2012] Not generating rmf since there are only 30 counts
[Thu May 17 02:50:57 2012] rmf not generated due to insufficient counts
[Thu May 17 02:55:53 2012] Updating aperture counts using extracted products
[Thu May 17 02:55:53 2012] Error reading totcts from fullrun_mos2_xmm0150620201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu May 17 02:55:55 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 02:55:55 2012] Using photon index=1.80, rate=0.00189, arf fullrun_mos2_xmm0150620201_pi300-10000_pass1_cl_src19.arf
[Thu May 17 02:55:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 02:55:55 2012] Updating source flux to 7.1e-14
[Thu May 17 02:56:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting