[Wed May 16 03:23:03 2012] Detection parameters:
  Position = (323.3, 379.0) = 9 20 1.18 30 34 4.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 219.0 +/- 18.0
  Background counts = 5.8
  Rate = 0.02 +/- 0.001

[Wed May 16 03:23:04 2012] Off-axis axis estimate = 6.12'
[Wed May 16 09:31:42 2012] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Wed May 16 09:31:42 2012] Initial guess for spatial extent in simple fitting = 9.49"
[Wed May 16 09:31:42 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.044
[Wed May 16 09:31:42 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.49"
[Wed May 16 12:56:30 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 16 12:56:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_src1.csv
[Wed May 16 12:56:30 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 16 12:56:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_src1.csv
[Wed May 16 12:56:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 12:56:31 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 16 12:56:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May 16 12:56:31 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 16 12:56:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May 16 12:56:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 12:57:26 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.914686 pixels away
[Wed May 16 12:57:26 2012] Vigneting correction estimate = 1.000000
[Wed May 16 12:57:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 12:57:26 2012] Assessing source extent using major
[Wed May 16 12:57:26 2012] Source does appear to be extended
[Wed May 16 12:57:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 20:01:47 2012] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Wed May 16 20:01:47 2012] Initial guess for spatial extent in simple fitting = 9.49"
[Wed May 16 20:01:47 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.044
[Wed May 16 20:01:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.49"
[Wed May 16 22:40:50 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 16 22:40:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_src1.csv
[Wed May 16 22:40:50 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 16 22:40:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_src1.csv
[Wed May 16 22:40:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 22:40:51 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 16 22:40:51 2012] fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 16 22:40:51 2012] Fit fullrun_mos2_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May 16 22:41:39 2012] Spatial fit model total counts = 259.229000, observed total counts = 257.000000
[Wed May 16 22:41:39 2012] Offset between fit and detection position for source 1 = 0.223561 pixels
[Wed May 16 22:41:39 2012] 259.747000 total counts/ 103.055000 bgd. counts: snr = 15.435201
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.223561 pixels
  Position = (323.1, 379.0) = 9 20 1.25 30 34 3.5
  Extent = 5.4 (4.7-6.1)", rotation angle = 0
  Source counts = 156.7 +/- 16.1
  Background counts = 103.1
  Rate = 0.01 +/- 0.001
[Wed May 16 22:41:39 2012] Vigneting correction estimate = 1.000000
[Wed May 16 22:41:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 22:41:39 2012] Assessing source extent using major axis lower bound
[Wed May 16 22:41:39 2012] Source does appear to be extended
[Wed May 16 22:41:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 02:02:35 2012] XMMSAS src. selection expression = ellipse(28061.539700, 32921.789600, 325.086609, 325.086609, 0.000000, X, Y)
[Thu May 17 02:02:35 2012] Writing source region out to fullrun_mos2_xmm0150620201_pi300-10000_pass1_cl_src1_src.reg
[Thu May 17 02:02:35 2012] Extracting stamp from image fullrun_mos2_xmm0150620201_pi300-10000_cl_sm2.00.img.gz, (304, 360) - (342, 398)
[Thu May 17 02:02:35 2012] XMMSAS bgd. selection expression = annulus(28061.539700, 32921.789600, 541.811016, 1083.622031, X, Y)
[Thu May 17 02:02:35 2012] Writing fullrun_mos2_xmm0150620201_pi300-10000_pass1_cl_src1.gif
[Thu May 17 02:02:39 2012] Mean detx,y = (-3371.28, 4107.56) 
[Thu May 17 02:02:41 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 02:02:54 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 02:02:55 2012] Setting source spectrum file to fullrun_mos2_xmm0150620201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 17 02:02:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0150620201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 17 02:55:52 2012] Updating aperture counts using extracted products
[Thu May 17 02:55:52 2012] Error reading totcts from fullrun_mos2_xmm0150620201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 17 02:55:54 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 02:55:54 2012] Using photon index=1.80, rate=0.0096, arf fullrun_mos2_xmm0150620201_pi300-10000_pass1_cl_src1.arf
[Thu May 17 02:55:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 02:55:54 2012] Updating source flux to 1.5e-13
[Thu May 17 02:58:00 2012] Reading fit data from xmm0150620201/analysis//spectral/fullrun_mos2_xmm0150620201_pi300-10000_pass1_cl_src1_pl.csv
[Thu May 17 02:58:00 2012] Spectral fit parameter nH value = 3.19829e+20
[Thu May 17 02:58:00 2012] Spectral fit parameter PhoIndex value = 2.37699
[Thu May 17 02:58:00 2012] Failed to get F(0.3-8.0) from xmm0150620201/analysis//spectral/fullrun_mos2_xmm0150620201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu May 17 02:58:00 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 02:58:00 2012] Using Nh = 3.2e+20, photon index=2.38, rate=0.0096, arf fullrun_mos2_xmm0150620201_pi300-10000_pass1_cl_src1.arf
[Thu May 17 02:58:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 02:58:00 2012] Updating source flux to 1.3e-13