[Wed May 16 03:22:11 2012] Detection parameters:
  Position = (206.4, 331.2) = 9 20 40.52 30 30 35.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.1 +/- 8.5
  Background counts = 6.8
  Rate = 0.004 +/- 0.0009

[Wed May 16 03:22:11 2012] Off-axis axis estimate = 7.08'
[Wed May 16 06:54:34 2012] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Wed May 16 06:54:34 2012] Initial guess for spatial extent in simple fitting = 9.97"
[Wed May 16 06:54:34 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.962
[Wed May 16 06:54:34 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 9.97"
[Wed May 16 09:31:41 2012] fullrun_mos1_xmm0150620201_pi300-10000_cl_pass0_src17.ximg exists
[Wed May 16 09:31:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150620201_pi300-10000_cl_pass0_src17.csv
[Wed May 16 09:31:41 2012] fullrun_mos1_xmm0150620201_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed May 16 09:31:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150620201_pi300-10000_cl_pass0_src17.csv
[Wed May 16 09:31:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150620201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150620201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 09:31:42 2012] fullrun_mos1_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed May 16 09:31:42 2012] fullrun_mos1_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed May 16 09:31:42 2012] Fit fullrun_mos1_xmm0150620201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Wed May 16 12:57:10 2012] Spatial fit model total counts = 83.404200, observed total counts = 81.000000
[Wed May 16 12:57:10 2012] Offset between fit and detection position for source 25 = 0.236988 pixels
[Wed May 16 12:57:10 2012] 85.810500 total counts/ 57.721500 bgd. counts: snr = 3.697153
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.236988 pixels
  Position = (206.7, 331.1) = 9 20 40.45 30 30 35.2
  Extent = 4.9 (3.6-7.1)", rotation angle = 0
  Source counts = 28.1 +/- 9.3
  Background counts = 57.7
  Rate = 0.002 +/- 0.0006
[Wed May 16 12:57:10 2012] Vigneting correction estimate = 1.000000
[Wed May 16 12:57:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 12:57:10 2012] Assessing source extent using major axis lower bound
[Wed May 16 12:57:10 2012] Source does appear to be extended
[Wed May 16 12:57:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 17:36:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 16 17:36:01 2012] Initial guess for spatial extent in simple fitting = 4.89"
[Wed May 16 17:36:01 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.853
[Wed May 16 17:36:01 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 4.89"
[Wed May 16 20:01:46 2012] fullrun_mos1_xmm0150620201_pi300-10000_cl_pass1_src14.ximg exists
[Wed May 16 20:01:46 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0150620201_pi300-10000_cl_pass1_src14.csv
[Wed May 16 20:01:46 2012] fullrun_mos1_xmm0150620201_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed May 16 20:01:46 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0150620201_pi300-10000_cl_pass1_src14.csv
[Wed May 16 20:01:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150620201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150620201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 20:01:47 2012] fullrun_mos1_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed May 16 20:01:47 2012] fullrun_mos1_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed May 16 20:01:47 2012] Fit fullrun_mos1_xmm0150620201_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Wed May 16 22:41:27 2012] Warning, spatial fit 14 centroid is now closest to src. 28
[Wed May 16 22:41:27 2012] Vigneting correction estimate = 1.000000
[Wed May 16 22:41:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 22:41:27 2012] Assessing source extent using major axis lower bound
[Wed May 16 22:41:27 2012] Source does appear to be extended
[Wed May 16 22:41:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 01:21:17 2012] XMMSAS src. selection expression = ellipse(17932.708600, 28759.462000, 293.355008, 293.355008, 0.000000, X, Y)
[Thu May 17 01:21:17 2012] Writing source region out to fullrun_mos1_xmm0150620201_pi300-10000_pass1_cl_src25_src.reg
[Thu May 17 01:21:17 2012] Extracting stamp from image fullrun_mos1_xmm0150620201_pi300-10000_cl_sm2.00.img.gz, (190, 314) - (224, 348)
[Thu May 17 01:21:18 2012] XMMSAS bgd. selection expression = annulus(17932.708600, 28759.462000, 488.925014, 977.850028, X, Y)
[Thu May 17 01:21:18 2012] Writing fullrun_mos1_xmm0150620201_pi300-10000_pass1_cl_src25.gif
[Thu May 17 01:30:21 2012] Mean detx,y = (4194.58, -7717.89) 
[Thu May 17 01:30:22 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 01:30:31 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 01:30:31 2012] Setting source spectrum file to fullrun_mos1_xmm0150620201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu May 17 01:30:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0150620201_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Thu May 17 01:59:47 2012] Not generating rmf since there are only 28 counts
[Thu May 17 01:59:47 2012] rmf not generated due to insufficient counts
[Thu May 17 02:55:49 2012] Updating aperture counts using extracted products
[Thu May 17 02:55:49 2012] Error reading totcts from fullrun_mos1_xmm0150620201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu May 17 02:55:51 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 02:55:51 2012] Using photon index=1.80, rate=0.00172, arf fullrun_mos1_xmm0150620201_pi300-10000_pass1_cl_src25.arf
[Thu May 17 02:55:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 02:55:51 2012] Updating source flux to 3.9e-14
[Thu May 17 02:55:58 2012] Source 25 has fewer than 100.000000 counts, skipping spectral fitting