[Tue Jul 17 10:32:11 2012] Detection parameters:
  Position = (315.2, 296.8) = 15 36 41.34 54 33 58.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.6 +/- 13.1
  Background counts = 42.4
  Rate = 0.002 +/- 0.0005

[Tue Jul 17 10:32:12 2012] Off-axis axis estimate = 1.22'
[Tue Jul 17 11:05:12 2012] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 11:05:12 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Tue Jul 17 11:05:12 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.891
[Tue Jul 17 11:05:12 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.04"
[Tue Jul 17 11:41:46 2012] fullrun_mos1_xmm0150610301_pi300-10000_cl_pass0_src19.ximg exists
[Tue Jul 17 11:41:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150610301_pi300-10000_cl_pass0_src19.csv
[Tue Jul 17 11:41:46 2012] fullrun_mos1_xmm0150610301_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Jul 17 11:41:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150610301_pi300-10000_cl_pass0_src19.csv
[Tue Jul 17 11:41:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150610301_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150610301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 11:41:46 2012] fullrun_mos1_xmm0150610301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Jul 17 11:41:46 2012] fullrun_mos1_xmm0150610301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Jul 17 11:41:46 2012] Fit fullrun_mos1_xmm0150610301_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Jul 17 12:06:20 2012] Warning, spatial fit 19 centroid is now closest to src. 1
[Tue Jul 17 12:06:20 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 12:06:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 12:06:20 2012] Assessing source extent using major
[Tue Jul 17 12:06:20 2012] Source does appear to be extended
[Tue Jul 17 12:06:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 12:31:36 2012] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 12:31:36 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Tue Jul 17 12:31:36 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.891
[Tue Jul 17 12:31:36 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 7.04"
[Tue Jul 17 13:05:35 2012] fullrun_mos1_xmm0150610301_pi300-10000_cl_pass1_src18.ximg exists
[Tue Jul 17 13:05:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150610301_pi300-10000_cl_pass1_src18.csv
[Tue Jul 17 13:05:35 2012] fullrun_mos1_xmm0150610301_pi300-10000_cl_pass1_src18_1.ximg exists
[Tue Jul 17 13:05:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150610301_pi300-10000_cl_pass1_src18.csv
[Tue Jul 17 13:05:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150610301_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150610301_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:05:36 2012] fullrun_mos1_xmm0150610301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Tue Jul 17 13:05:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150610301_pi300-10000_cl_pass1_tfrozen_src18.csv
[Tue Jul 17 13:05:36 2012] fullrun_mos1_xmm0150610301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Jul 17 13:05:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150610301_pi300-10000_cl_pass1_tfrozen_src18.csv
[Tue Jul 17 13:05:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150610301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150610301_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:31:46 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.184850 pixels away
[Tue Jul 17 13:31:46 2012] Warning, spatial fit 18 centroid is now closest to src. 1
[Tue Jul 17 13:31:46 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:31:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:31:46 2012] Assessing source extent using major
[Tue Jul 17 13:31:46 2012] Source does appear to be extended
[Tue Jul 17 13:31:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 14:03:03 2012] XMMSAS src. selection expression = ellipse(27377.514557, 25769.296936, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 17 14:03:03 2012] Writing source region out to fullrun_mos1_xmm0150610301_pi300-10000_pass1_cl_src16_src.reg
[Tue Jul 17 14:03:03 2012] Extracting stamp from image fullrun_mos1_xmm0150610301_pi300-10000_cl_sm2.00.img.gz, (278, 259) - (353, 334)
[Tue Jul 17 14:03:03 2012] XMMSAS bgd. selection expression = annulus(27377.514557, 25769.296936, 1087.500000, 2175.000000, X, Y) && !ellipse(27884.322580, 25290.020600, 428.164012, 428.164012, 0.000000, X, Y) && !ellipse(27320.048000, 27127.651200, 422.144012, 422.144012, 0.000000, X, Y)
[Tue Jul 17 14:03:03 2012] Writing fullrun_mos1_xmm0150610301_pi300-10000_pass1_cl_src16.gif
[Tue Jul 17 14:09:38 2012] Mean detx,y = (112.63, -520.10) 
[Tue Jul 17 14:09:39 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 14:09:50 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 14:09:50 2012] Setting source spectrum file to fullrun_mos1_xmm0150610301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Jul 17 14:09:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0150610301_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue Jul 17 14:21:02 2012] Not generating rmf since there are only 53 counts
[Tue Jul 17 14:21:02 2012] rmf not generated due to insufficient counts
[Tue Jul 17 14:37:50 2012] Updating aperture counts using extracted products
[Tue Jul 17 14:37:50 2012] Error reading totcts from fullrun_mos1_xmm0150610301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Jul 17 14:37:51 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 14:37:51 2012] Using photon index=1.80, rate=0.0019, arf fullrun_mos1_xmm0150610301_pi300-10000_pass1_cl_src16.arf
[Tue Jul 17 14:37:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 14:37:51 2012] Updating source flux to 1.8e-14
[Tue Jul 17 14:37:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting