[Tue Jul 24 06:19:19 2012] Detection parameters:
  Position = (333.4, 380.8) = 7 21 35.50 71 25 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.5 +/- 11.8
  Background counts = 24.9
  Rate = 0.002 +/- 0.0003

[Tue Jul 24 06:19:20 2012] Off-axis axis estimate = 6.49'
[Tue Jul 24 06:39:29 2012] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 06:39:29 2012] Initial guess for spatial extent in simple fitting = 9.67"
[Tue Jul 24 06:39:29 2012] source mask rpix=2.2, npix_max = 29, mask sum = 16, frac = 0.539
[Tue Jul 24 06:39:29 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 9.67"
[Tue Jul 24 08:25:34 2012] fullrun_mos2_xmm0150495601_pi300-10000_cl_pass0_src18.ximg exists
[Tue Jul 24 08:25:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150495601_pi300-10000_cl_pass0_src18.csv
[Tue Jul 24 08:25:34 2012] fullrun_mos2_xmm0150495601_pi300-10000_cl_pass0_src18_1.ximg exists
[Tue Jul 24 08:25:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150495601_pi300-10000_cl_pass0_src18.csv
[Tue Jul 24 08:25:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150495601_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150495601_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 08:25:35 2012] fullrun_mos2_xmm0150495601_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Tue Jul 24 08:25:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150495601_pi300-10000_cl_pass0_tfrozen_src18.csv
[Tue Jul 24 08:25:35 2012] fullrun_mos2_xmm0150495601_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Jul 24 08:25:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150495601_pi300-10000_cl_pass0_tfrozen_src18.csv
[Tue Jul 24 08:25:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150495601_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150495601_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 08:25:48 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 12.107504 pixels away
[Tue Jul 24 08:25:48 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 08:25:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 08:25:48 2012] Assessing source extent using major
[Tue Jul 24 08:25:48 2012] Source does appear to be extended
[Tue Jul 24 08:25:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 08:25:48 2012] Deleting source due to low Poisson probability 0.9