[Sat Sep 24 10:33:05 2011] Detection parameters:
  Position = (305.1, 321.0) = 14 53 57.39 3 32 41.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.3 +/- 19.9
  Background counts = 49.4
  Rate = 0.004 +/- 0.0005

[Sat Sep 24 10:33:06 2011] Off-axis axis estimate = 1.71'
[Sat Sep 24 11:30:47 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 11:30:47 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Sep 24 11:30:47 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Sat Sep 24 11:30:47 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 7.28"
[Sat Sep 24 12:05:13 2011] fullrun_mos1_xmm0150350101_pi300-10000_cl_pass0_src7.ximg exists
[Sat Sep 24 12:05:13 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0150350101_pi300-10000_cl_pass0_src7.csv
[Sat Sep 24 12:05:13 2011] fullrun_mos1_xmm0150350101_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Sep 24 12:05:13 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0150350101_pi300-10000_cl_pass0_src7.csv
[Sat Sep 24 12:05:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150350101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150350101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 12:05:13 2011] fullrun_mos1_xmm0150350101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Sep 24 12:05:13 2011] fullrun_mos1_xmm0150350101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Sep 24 12:05:13 2011] Fit fullrun_mos1_xmm0150350101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sat Sep 24 12:36:38 2011] Warning, spatial fit 7 centroid is now closest to src. 10
[Sat Sep 24 12:36:38 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 12:36:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 12:36:38 2011] Assessing source extent using major
[Sat Sep 24 12:36:38 2011] Source does appear to be extended
[Sat Sep 24 12:36:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 13:20:41 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 13:20:41 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Sep 24 13:20:41 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Sat Sep 24 13:20:41 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 7.28"
[Sat Sep 24 13:49:53 2011] fullrun_mos1_xmm0150350101_pi300-10000_cl_pass1_src7.ximg exists
[Sat Sep 24 13:49:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150350101_pi300-10000_cl_pass1_src7.csv
[Sat Sep 24 13:49:53 2011] fullrun_mos1_xmm0150350101_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat Sep 24 13:49:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150350101_pi300-10000_cl_pass1_src7.csv
[Sat Sep 24 13:49:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150350101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150350101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 13:49:53 2011] fullrun_mos1_xmm0150350101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat Sep 24 13:49:53 2011] fullrun_mos1_xmm0150350101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Sep 24 13:49:53 2011] Fit fullrun_mos1_xmm0150350101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sat Sep 24 14:10:25 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 15.672211 pixels away
[Sat Sep 24 14:10:25 2011] Warning, spatial fit 7 centroid is now closest to src. 10
[Sat Sep 24 14:10:25 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:10:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:10:25 2011] Assessing source extent using major
[Sat Sep 24 14:10:25 2011] Source does appear to be extended
[Sat Sep 24 14:10:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 15:04:00 2011] XMMSAS src. selection expression = ellipse(26498.094513, 27882.169250, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Sep 24 15:04:00 2011] Writing source region out to fullrun_mos1_xmm0150350101_pi300-10000_pass1_cl_src9_src.reg
[Sat Sep 24 15:04:00 2011] Extracting stamp from image fullrun_mos1_xmm0150350101_pi300-10000_cl_sm2.00.img.gz, (268, 284) - (343, 359)
[Sat Sep 24 15:04:00 2011] XMMSAS bgd. selection expression = annulus(26498.094513, 27882.169250, 1087.500000, 2175.000000, X, Y) && !ellipse(25879.199432, 26973.282000, 416.540812, 416.540812, 0.000000, X, Y) && !ellipse(26926.977180, 29445.075600, 292.178771, 292.178771, 0.000000, X, Y) && !ellipse(25903.842000, 27382.842000, 546.028016, 546.028016, 0.000000, X, Y) && !ellipse(25422.688171, 26501.835449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27135.685600, 27627.529000, 341.165610, 341.165610, 0.000000, X, Y)
[Sat Sep 24 15:04:00 2011] Writing fullrun_mos1_xmm0150350101_pi300-10000_pass1_cl_src9.gif
[Sat Sep 24 15:05:09 2011] Mean detx,y = (243.59, -122.49) 
[Sat Sep 24 15:05:10 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 15:05:19 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 15:05:19 2011] Setting source spectrum file to fullrun_mos1_xmm0150350101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Sep 24 15:05:19 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0150350101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat Sep 24 15:21:05 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Sep 24 15:21:05 2011] rmf not generated due to insufficient counts
[Sat Sep 24 15:36:19 2011] Updating aperture counts using extracted products
[Sat Sep 24 15:36:19 2011] Error reading totcts from fullrun_mos1_xmm0150350101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Sep 24 15:36:20 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 15:36:20 2011] Using photon index=1.80, rate=0.00434, arf fullrun_mos1_xmm0150350101_pi300-10000_pass1_cl_src9.arf
[Sat Sep 24 15:36:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 15:36:20 2011] Updating source flux to 4.1e-14
[Sat Sep 24 15:36:22 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting