[Sat Sep 24 10:33:06 2011] Detection parameters:
  Position = (261.8, 440.6) = 14 54 9.99 3 41 23.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.5 +/- 12.5
  Background counts = 38.3
  Rate = 0.003 +/- 0.0006

[Sat Sep 24 10:33:06 2011] Off-axis axis estimate = 10.64'
[Sat Sep 24 11:30:47 2011] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 11:30:47 2011] Initial guess for spatial extent in simple fitting = 11.75"
[Sat Sep 24 11:30:47 2011] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.025
[Sat Sep 24 11:30:47 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 11.75"
[Sat Sep 24 12:05:13 2011] fullrun_mos1_xmm0150350101_pi300-10000_cl_pass0_src12.ximg exists
[Sat Sep 24 12:05:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150350101_pi300-10000_cl_pass0_src12.csv
[Sat Sep 24 12:05:13 2011] fullrun_mos1_xmm0150350101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat Sep 24 12:05:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150350101_pi300-10000_cl_pass0_src12.csv
[Sat Sep 24 12:05:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150350101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150350101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 12:05:13 2011] fullrun_mos1_xmm0150350101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat Sep 24 12:05:13 2011] fullrun_mos1_xmm0150350101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Sep 24 12:05:13 2011] Fit fullrun_mos1_xmm0150350101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sat Sep 24 12:36:38 2011] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 11.647642 pixels away
[Sat Sep 24 12:36:38 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 12:36:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 12:36:38 2011] Assessing source extent using major
[Sat Sep 24 12:36:38 2011] Source does appear to be extended
[Sat Sep 24 12:36:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 13:20:41 2011] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 13:20:41 2011] Initial guess for spatial extent in simple fitting = 11.75"
[Sat Sep 24 13:20:41 2011] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.025
[Sat Sep 24 13:20:41 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 11.75"
[Sat Sep 24 13:49:53 2011] fullrun_mos1_xmm0150350101_pi300-10000_cl_pass1_src11.ximg exists
[Sat Sep 24 13:49:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150350101_pi300-10000_cl_pass1_src11.csv
[Sat Sep 24 13:49:53 2011] fullrun_mos1_xmm0150350101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Sep 24 13:49:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150350101_pi300-10000_cl_pass1_src11.csv
[Sat Sep 24 13:49:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150350101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150350101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 13:49:53 2011] fullrun_mos1_xmm0150350101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Sep 24 13:49:53 2011] fullrun_mos1_xmm0150350101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Sep 24 13:49:53 2011] Fit fullrun_mos1_xmm0150350101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Sep 24 14:10:25 2011] Spatial fit model total counts = 182.999000, observed total counts = 183.000000
[Sat Sep 24 14:10:25 2011] Offset between fit and detection position for source 23 = 0.495148 pixels
[Sat Sep 24 14:10:25 2011] 179.739800 total counts/ 154.164000 bgd. counts: snr = 2.059860
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.495148 pixels
  Position = (261.7, 441.0) = 14 54 10.02 3 41 23.5
  Extent = 4.3 (2.9-5.8)", rotation angle = 0
  Source counts = 25.6 +/- 13.4
  Background counts = 154.2
  Rate = 0.0008 +/- 0.0004
[Sat Sep 24 14:10:25 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:10:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:10:25 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:10:25 2011] Source does appear to be extended
[Sat Sep 24 14:10:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 15:04:00 2011] XMMSAS src. selection expression = ellipse(22716.968400, 38322.778100, 258.387007, 258.387007, 0.000000, X, Y)
[Sat Sep 24 15:04:00 2011] Writing source region out to fullrun_mos1_xmm0150350101_pi300-10000_pass1_cl_src23_src.reg
[Sat Sep 24 15:04:00 2011] Extracting stamp from image fullrun_mos1_xmm0150350101_pi300-10000_cl_sm2.00.img.gz, (247, 426) - (277, 456)
[Sat Sep 24 15:04:00 2011] XMMSAS bgd. selection expression = annulus(22716.968400, 38322.778100, 430.645012, 861.290025, X, Y)
[Sat Sep 24 15:04:00 2011] Writing fullrun_mos1_xmm0150350101_pi300-10000_pass1_cl_src23.gif
[Sat Sep 24 15:05:59 2011] Mean detx,y = (11355.18, -230.51) 
[Sat Sep 24 15:06:00 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 15:06:05 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 15:06:05 2011] Setting source spectrum file to fullrun_mos1_xmm0150350101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Sep 24 15:06:05 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0150350101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat Sep 24 15:24:16 2011] Not generating rmf since there are only 25 counts
[Sat Sep 24 15:24:16 2011] rmf not generated due to insufficient counts
[Sat Sep 24 15:36:19 2011] Updating aperture counts using extracted products
[Sat Sep 24 15:36:19 2011] Error reading totcts from fullrun_mos1_xmm0150350101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Sep 24 15:36:20 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 15:36:20 2011] Using photon index=1.80, rate=0.000809, arf fullrun_mos1_xmm0150350101_pi300-10000_pass1_cl_src23.arf
[Sat Sep 24 15:36:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 15:36:20 2011] Updating source flux to 2.2e-14
[Sat Sep 24 15:36:22 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting