[Tue Mar 13 10:54:48 2012] Detection parameters:
  Position = (293.0, 316.2) = 3 18 42.70 -66 35 10.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 502.2 +/- 123.2
  Background counts = 366.0
  Rate = 0.05 +/- 0.01

[Tue Mar 13 10:54:53 2012] Off-axis axis estimate = 1.35'
[Tue Mar 13 10:55:29 2012] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:55:29 2012] Initial guess for spatial extent in simple fitting = 7.10"
[Tue Mar 13 10:55:29 2012] source mask rpix=1.6, npix_max = 18, mask sum = 13, frac = 0.714
[Tue Mar 13 10:55:29 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.10"
[Tue Mar 13 10:55:30 2012] fullrun_pn_xmm0150280701_pi300-10000_cl_pass0_src2.ximg exists
[Tue Mar 13 10:55:30 2012] fullrun_pn_xmm0150280701_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Mar 13 10:55:30 2012] Fit fullrun_pn_xmm0150280701_pi300-10000_cl_pass0_src2 appears to have run properly
[Tue Mar 13 10:55:32 2012] fullrun_pn_xmm0150280701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Mar 13 10:55:32 2012] fullrun_pn_xmm0150280701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Mar 13 10:55:32 2012] Fit fullrun_pn_xmm0150280701_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Mar 13 10:55:56 2012] Source 3 is offset by 6.126857 and 4.357385 pixels which is larger than
2 X fitted extent = 5.852598 x 5.852598, not incorporating fit results
[Tue Mar 13 10:55:56 2012] Spatial fit model total counts = 1615.870000, observed total counts = 1575.000000
[Tue Mar 13 10:55:56 2012] Offset between fit and detection position for source 3 = 4.016065 pixels
[Tue Mar 13 10:55:56 2012] Warning, changing simple spatial fit ID from 2 to 45
[Tue Mar 13 10:55:56 2012] 1631.337000 total counts/ 1375.650000 bgd. counts: snr = 6.893736
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.016065 pixels
  Position = (294.7, 319.9) = 3 18 41.47 -66 34 34.0
  Extent = 14.9" x 9.0", rotation angle = 140
  Source counts = 255.7 +/- 40.4
  Background counts = 1375.7
  Rate = 0.09 +/- 0.01
[Tue Mar 13 10:55:56 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:55:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:55:56 2012] Assessing source extent using major
[Tue Mar 13 10:55:56 2012] Source does appear to be extended
[Tue Mar 13 10:55:56 2012] Computing asymmetry using major and minor axis, asym = 1.64
[Tue Mar 13 10:55:56 2012] Source is asymmetric
[Tue Mar 13 10:55:56 2012] Source is confused with source 2
[Tue Mar 13 10:56:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:56:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 10:56:18 2012] Initial guess for spatial extent in simple fitting = 11.96"
[Tue Mar 13 10:56:18 2012] source mask rpix=2.7, npix_max = 42, mask sum = 41, frac = 0.971
[Tue Mar 13 10:56:18 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.96"
[Tue Mar 13 10:56:20 2012] fullrun_pn_xmm0150280701_pi300-10000_cl_pass1_src2.ximg exists
[Tue Mar 13 10:56:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150280701_pi300-10000_cl_pass1_src2.csv
[Tue Mar 13 10:56:20 2012] fullrun_pn_xmm0150280701_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Mar 13 10:56:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150280701_pi300-10000_cl_pass1_src2.csv
[Tue Mar 13 10:56:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150280701_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150280701_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:56:21 2012] fullrun_pn_xmm0150280701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Mar 13 10:56:21 2012] fullrun_pn_xmm0150280701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Mar 13 10:56:21 2012] Fit fullrun_pn_xmm0150280701_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Mar 13 10:56:47 2012] Warning, spatial fit 2 centroid is now closest to src. 46
[Tue Mar 13 10:56:47 2012] Spatial fit model total counts = 1578.940000, observed total counts = 1575.000000
[Tue Mar 13 10:56:47 2012] Offset between fit and detection position for source 3 = 0.199324 pixels
[Tue Mar 13 10:56:47 2012] Warning, changing simple spatial fit ID from 2 to 44
[Tue Mar 13 10:56:47 2012] 1465.059000 total counts/ 1125.700000 bgd. counts: snr = 10.114584
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.199324 pixels
  Position = (294.5, 319.8) = 3 18 41.60 -66 34 34.4
  Extent = 14.7 (13.8-29.4)" x 9.5 (7.5-11.7)", rotation angle = 328 (309-339) degrees
  Source counts = 339.4 +/- 38.3
  Background counts = 1125.7
  Rate = 0.1 +/- 0.01
[Tue Mar 13 10:56:47 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:56:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:56:47 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:56:47 2012] Source does appear to be extended
[Tue Mar 13 10:56:47 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.18
[Tue Mar 13 10:57:10 2012] XMMSAS src. selection expression = ellipse(25570.962000, 27770.912000, 882.066025, 570.460216, 327.881000, X, Y)
[Tue Mar 13 10:57:10 2012] Not overwriting source region fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src3_src.reg
[Tue Mar 13 10:57:10 2012] Extracting stamp from image fullrun_pn_xmm0150280701_pi300-10000_cl_sm2.00.img.gz, (244, 269) - (345, 370)
[Tue Mar 13 10:57:10 2012] XMMSAS bgd. selection expression = annulus(25570.962000, 27770.912000, 1470.110042, 2940.220085, X, Y) && !ellipse(26091.572357, 27765.926758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27885.657060, 25967.825800, 370.931211, 370.931211, 0.000000, X, Y) && !ellipse(22636.908000, 32611.928000, 1996.872057, 1085.576031, 312.405000, X, Y) && !ellipse(22880.979031, 32569.720280, 2524.544073, 1003.801533, 45.177613, X, Y) && !ellipse(25391.998688, 30028.086060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25323.084800, 29684.262000, 1122.664032, 1122.664032, 0.000000, X, Y) && !ellipse(26024.844000, 28901.598000, 1080.160031, 1080.160031, 0.000000, X, Y) && !ellipse(26559.797600, 28548.906400, 524.416815, 524.416815, 0.000000, X, Y) && !ellipse(24230.329680, 26583.840400, 645.936019, 645.936019, 0.000000, X, Y) && !ellipse(23037.104000, 25592.180000, 1189.704034, 1189.704034, 0.000000, X, Y) && !ellipse(23426.860000, 31855.400000, 1410.280041, 1410.280041, 0.000000, X, Y) && !ellipse(25108.691132, 28128.630310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25944.678000, 28288.400000, 1913.424055, 1913.424055, 0.000000, X, Y) && !ellipse(23755.236000, 26159.466000, 3325.344096, 1657.264048, 339.362600, X, Y) && !ellipse(28675.600861, 25534.329498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23147.086000, 25614.910000, 1189.704034, 689.008020, 145.431000, X, Y) && !ellipse(21656.222000, 24758.562000, 2455.472071, 2455.472071, 0.000000, X, Y)
[Tue Mar 13 10:57:10 2012] Writing fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src3.gif
[Tue Mar 13 10:57:15 2012] ../../xmm0150280701/products/events/fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0150280701/products/events/fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Mar 13 10:57:15 2012] Mean detx,y = (-2811.82, 552.07) 
[Tue Mar 13 10:57:15 2012] ../../xmm0150280701/products/images/fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src3_src.img and ../../xmm0150280701/products/images/fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Mar 13 10:57:15 2012] ../../xmm0150280701/products/spectra/fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0150280701/products/spectra/fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue Mar 13 10:57:15 2012] Setting source spectrum file to fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Mar 13 10:57:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Mar 13 10:57:15 2012] ../../xmm0150280701/products/lightcurves/fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0150280701/products/lightcurves/fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Mar 13 10:57:34 2012] fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src3.rmf exists, delete to re-create
[Tue Mar 13 10:57:34 2012] fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Tue Mar 13 10:58:26 2012] Updating aperture counts using extracted products
[Tue Mar 13 10:58:26 2012] Error reading totcts from fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Mar 13 10:58:30 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:58:30 2012] Using photon index=1.80, rate=0.124, arf fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src3.arf
[Tue Mar 13 10:58:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 10:58:30 2012] Updating source flux to 3.9e-13
[Tue Mar 13 10:58:42 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Tue Mar 13 10:58:42 2012] Flag c found in src. 3 procflags, skipping spectral fitting