[Tue Mar 13 10:54:49 2012] Detection parameters:
  Position = (217.0, 428.9) = 3 19 37.78 -66 26 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 196.4 +/- 29.1
  Background counts = 285.1
  Rate = 0.02 +/- 0.003

[Tue Mar 13 10:54:53 2012] Off-axis axis estimate = 11.15'
[Tue Mar 13 10:55:29 2012] Using EEF radius (= 12.00 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:55:29 2012] Initial guess for spatial extent in simple fitting = 12.00"
[Tue Mar 13 10:55:29 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.847
[Tue Mar 13 10:55:29 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.00"
[Tue Mar 13 10:55:31 2012] fullrun_pn_xmm0150280701_pi300-10000_cl_pass0_src11.ximg exists
[Tue Mar 13 10:55:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150280701_pi300-10000_cl_pass0_src11.csv
[Tue Mar 13 10:55:31 2012] fullrun_pn_xmm0150280701_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Mar 13 10:55:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150280701_pi300-10000_cl_pass0_src11.csv
[Tue Mar 13 10:55:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150280701_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150280701_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:55:32 2012] fullrun_pn_xmm0150280701_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Mar 13 10:55:32 2012] fullrun_pn_xmm0150280701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Mar 13 10:55:32 2012] Fit fullrun_pn_xmm0150280701_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Mar 13 10:55:56 2012] Source 12 is offset by -2.945719 and -4.138609 pixels which is larger than
2 X fitted extent = 1.805136 x 1.805136, not incorporating fit results
[Tue Mar 13 10:55:56 2012] Spatial fit model total counts = 1481.240000, observed total counts = 1481.000000
[Tue Mar 13 10:55:56 2012] Offset between fit and detection position for source 12 = 0.914800 pixels
[Tue Mar 13 10:55:56 2012] Warning, changing simple spatial fit ID from 11 to 9
[Tue Mar 13 10:55:56 2012] 1344.837000 total counts/ 1076.430000 bgd. counts: snr = 8.180897
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.914800 pixels
  Position = (216.2, 429.4) = 3 19 38.35 -66 26 36.7
  Extent = 14.3 (10.4-23.3)", rotation angle = 0
  Source counts = 268.4 +/- 36.7
  Background counts = 1076.4
  Rate = 0.1 +/- 0.01
[Tue Mar 13 10:55:56 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:55:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:55:56 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:55:56 2012] Source does appear to be extended
[Tue Mar 13 10:55:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:55:56 2012] Source is confused with source 10
[Tue Mar 13 10:56:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:56:18 2012] Initial guess for spatial extent in simple fitting = 14.30"
[Tue Mar 13 10:56:18 2012] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.976
[Tue Mar 13 10:56:18 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 14.30"
[Tue Mar 13 10:56:20 2012] fullrun_pn_xmm0150280701_pi300-10000_cl_pass1_src11.ximg exists
[Tue Mar 13 10:56:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150280701_pi300-10000_cl_pass1_src11.csv
[Tue Mar 13 10:56:20 2012] fullrun_pn_xmm0150280701_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Mar 13 10:56:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150280701_pi300-10000_cl_pass1_src11.csv
[Tue Mar 13 10:56:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150280701_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150280701_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:56:22 2012] fullrun_pn_xmm0150280701_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Mar 13 10:56:22 2012] fullrun_pn_xmm0150280701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Mar 13 10:56:22 2012] Fit fullrun_pn_xmm0150280701_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Mar 13 10:56:47 2012] Warning, spatial fit 11 centroid is now closest to src. 10
[Tue Mar 13 10:56:47 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:56:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:56:47 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:56:47 2012] Source does appear to be extended
[Tue Mar 13 10:56:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:57:11 2012] XMMSAS src. selection expression = ellipse(18765.174000, 37310.712000, 857.946025, 857.946025, 0.000000, X, Y)
[Tue Mar 13 10:57:11 2012] Not overwriting source region fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src12_src.reg
[Tue Mar 13 10:57:11 2012] Extracting stamp from image fullrun_pn_xmm0150280701_pi300-10000_cl_sm2.00.img.gz, (167, 380) - (266, 479)
[Tue Mar 13 10:57:11 2012] XMMSAS bgd. selection expression = annulus(18765.174000, 37310.712000, 1429.910041, 2859.820082, X, Y) && !ellipse(17352.288512, 38926.765481, 2087.944060, 801.239179, 229.644683, X, Y) && !ellipse(17009.578000, 39109.994000, 2087.944060, 940.120027, 40.665000, X, Y) && !ellipse(16609.735260, 39366.389618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18330.450455, 37809.422028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17186.334610, 37701.710144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18796.524000, 37151.060000, 1892.704054, 1892.704054, 0.000000, X, Y) && !ellipse(19399.888600, 36659.579000, 600.333617, 600.333617, 0.000000, X, Y) && !ellipse(19946.324000, 35882.756000, 1734.608050, 1734.608050, 0.000000, X, Y) && !ellipse(20393.482559, 35364.161285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20536.034000, 34700.840000, 1864.688054, 1864.688054, 0.000000, X, Y) && !ellipse(20434.114000, 34464.880000, 3183.464092, 3183.464092, 0.000000, X, Y) && !ellipse(21319.322000, 34181.982000, 3465.840100, 1155.600033, 44.144000, X, Y) && !ellipse(21711.074000, 33956.680000, 1236.136036, 1236.136036, 0.000000, X, Y) && !ellipse(22058.080000, 33604.194000, 1667.136048, 857.408025, 49.312600, X, Y) && !ellipse(22636.908000, 32611.928000, 1996.872057, 1085.576031, 312.405000, X, Y) && !ellipse(22880.979031, 32569.720280, 2524.544073, 1003.801533, 45.177613, X, Y) && !ellipse(16187.147522, 40052.709381, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 13 10:57:11 2012] Writing fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src12.gif
[Tue Mar 13 10:57:16 2012] ../../xmm0150280701/products/events/fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src12_src.evt and ../../xmm0150280701/products/events/fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src12_bgd.evt exist, delete to re-create
[Tue Mar 13 10:57:16 2012] Mean detx,y = (-14334.86, -461.10) 
[Tue Mar 13 10:57:16 2012] ../../xmm0150280701/products/images/fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src12_src.img and ../../xmm0150280701/products/images/fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src12_bgd.img exist, delete to re-create
[Tue Mar 13 10:57:16 2012] ../../xmm0150280701/products/spectra/fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src12_src_b10.pi.gz and ../../xmm0150280701/products/spectra/fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src12_bgd.pi exist, delete to re-create
[Tue Mar 13 10:57:16 2012] Setting source spectrum file to fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Mar 13 10:57:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Tue Mar 13 10:57:16 2012] ../../xmm0150280701/products/lightcurves/fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src12_src.lc and ../../xmm0150280701/products/lightcurves/fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src12_bgd.lc exist, delete to re-create
[Tue Mar 13 10:57:34 2012] fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src12.rmf exists, delete to re-create
[Tue Mar 13 10:57:34 2012] fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src12.arf exists, delete to re-create
[Tue Mar 13 10:58:27 2012] Updating aperture counts using extracted products
[Tue Mar 13 10:58:27 2012] Error reading totcts from fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Mar 13 10:58:30 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:58:30 2012] Using photon index=1.80, rate=0.0983, arf fullrun_pn_xmm0150280701_pi300-10000_pass1_cl_src12.arf
[Tue Mar 13 10:58:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 10:58:30 2012] Updating source flux to 6.6e-13
[Tue Mar 13 10:58:42 2012] Flag b found in src. 12 procflags, skipping spectral fitting
[Tue Mar 13 10:58:42 2012] Flag c found in src. 12 procflags, skipping spectral fitting