[Tue Mar 13 10:54:55 2012] Detection parameters:
  Position = (344.4, 378.8) = 3 18 5.27 -66 30 15.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.5 +/- 21.1
  Background counts = 166.9
  Rate = 0.009 +/- 0.002

[Tue Mar 13 10:54:56 2012] Off-axis axis estimate = 6.71'
[Tue Mar 13 10:55:34 2012] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:55:34 2012] Initial guess for spatial extent in simple fitting = 9.78"
[Tue Mar 13 10:55:34 2012] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.992
[Tue Mar 13 10:55:34 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.78"
[Tue Mar 13 10:55:35 2012] fullrun_mos2_xmm0150280701_pi300-10000_cl_pass0_src5.ximg exists
[Tue Mar 13 10:55:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150280701_pi300-10000_cl_pass0_src5.csv
[Tue Mar 13 10:55:35 2012] fullrun_mos2_xmm0150280701_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Mar 13 10:55:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150280701_pi300-10000_cl_pass0_src5.csv
[Tue Mar 13 10:55:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150280701_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150280701_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:55:35 2012] fullrun_mos2_xmm0150280701_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Mar 13 10:55:35 2012] fullrun_mos2_xmm0150280701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Mar 13 10:55:35 2012] Fit fullrun_mos2_xmm0150280701_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Mar 13 10:56:01 2012] Spatial fit model total counts = 274.976000, observed total counts = 275.000000
[Tue Mar 13 10:56:01 2012] Offset between fit and detection position for source 6 = 8.364842 pixels
[Tue Mar 13 10:56:01 2012] 275.938200 total counts/ 184.744000 bgd. counts: snr = 6.709375
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 8.364842 pixels
  Position = (337.3, 383.2) = 3 18 10.46 -66 29 58.5
  Extent = 19.1 (18.2-19.6)", rotation angle = 0
  Source counts = 91.2 +/- 16.6
  Background counts = 184.7
  Rate = 0.02 +/- 0.004
[Tue Mar 13 10:56:01 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:56:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:56:01 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:56:01 2012] Source does appear to be extended
[Tue Mar 13 10:56:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:56:01 2012] Source is confused with source 5
[Tue Mar 13 10:56:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:56:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 10:56:24 2012] Initial guess for spatial extent in simple fitting = 19.11"
[Tue Mar 13 10:56:24 2012] source mask rpix=4.4, npix_max = 95, mask sum = 100, frac = 1.045
[Tue Mar 13 10:56:24 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 19.11"
[Tue Mar 13 10:56:25 2012] fullrun_mos2_xmm0150280701_pi300-10000_cl_pass1_src4.ximg exists
[Tue Mar 13 10:56:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150280701_pi300-10000_cl_pass1_src4.csv
[Tue Mar 13 10:56:25 2012] fullrun_mos2_xmm0150280701_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Mar 13 10:56:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150280701_pi300-10000_cl_pass1_src4.csv
[Tue Mar 13 10:56:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150280701_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150280701_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:56:25 2012] fullrun_mos2_xmm0150280701_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Mar 13 10:56:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150280701_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue Mar 13 10:56:25 2012] fullrun_mos2_xmm0150280701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Mar 13 10:56:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150280701_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue Mar 13 10:56:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150280701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150280701_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:56:52 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 23.241523 pixels away
[Tue Mar 13 10:56:52 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 24.932528 pixels away
[Tue Mar 13 10:56:52 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:56:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:56:52 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:56:52 2012] Source does appear to be extended
[Tue Mar 13 10:56:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:57:37 2012] XMMSAS src. selection expression = ellipse(29294.624000, 33286.108000, 1146.384033, 1146.384033, 0.000000, X, Y)
[Tue Mar 13 10:57:37 2012] Not overwriting source region fullrun_mos2_xmm0150280701_pi300-10000_pass1_cl_src6_src.reg
[Tue Mar 13 10:57:37 2012] Extracting stamp from image fullrun_mos2_xmm0150280701_pi300-10000_cl_sm2.00.img.gz, (271, 317) - (403, 449)
[Tue Mar 13 10:57:37 2012] XMMSAS bgd. selection expression = annulus(29294.624000, 33286.108000, 1910.640055, 3821.280110, X, Y) && !ellipse(28192.026800, 34195.332000, 376.596811, 376.596811, 0.000000, X, Y) && !ellipse(33102.574180, 29523.313400, 276.684008, 276.684008, 0.000000, X, Y) && !ellipse(28384.748300, 33177.039400, 415.902412, 415.902412, 0.000000, X, Y)
[Tue Mar 13 10:57:37 2012] Writing fullrun_mos2_xmm0150280701_pi300-10000_pass1_cl_src6.gif
[Tue Mar 13 10:57:38 2012] ../../xmm0150280701/products/events/fullrun_mos2_xmm0150280701_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0150280701/products/events/fullrun_mos2_xmm0150280701_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Tue Mar 13 10:57:38 2012] Mean detx,y = (4694.18, 5583.96) 
[Tue Mar 13 10:57:38 2012] ../../xmm0150280701/products/images/fullrun_mos2_xmm0150280701_pi300-10000_pass1_cl_src6_src.img and ../../xmm0150280701/products/images/fullrun_mos2_xmm0150280701_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Tue Mar 13 10:57:38 2012] ../../xmm0150280701/products/spectra/fullrun_mos2_xmm0150280701_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0150280701/products/spectra/fullrun_mos2_xmm0150280701_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Tue Mar 13 10:57:38 2012] Setting source spectrum file to fullrun_mos2_xmm0150280701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Mar 13 10:57:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0150280701_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Mar 13 10:57:38 2012] ../../xmm0150280701/products/lightcurves/fullrun_mos2_xmm0150280701_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0150280701/products/lightcurves/fullrun_mos2_xmm0150280701_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Tue Mar 13 10:57:40 2012] Not generating rmf since there are only 91 counts
[Tue Mar 13 10:57:40 2012] rmf not generated due to insufficient counts
[Tue Mar 13 10:57:40 2012] fullrun_mos2_xmm0150280701_pi300-10000_pass1_cl_src6.arf exists, delete to re-create
[Tue Mar 13 10:58:35 2012] Updating aperture counts using extracted products
[Tue Mar 13 10:58:35 2012] Error reading totcts from fullrun_mos2_xmm0150280701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Mar 13 10:58:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:58:35 2012] Using photon index=1.80, rate=0.0221, arf fullrun_mos2_xmm0150280701_pi300-10000_pass1_cl_src6.arf
[Tue Mar 13 10:58:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 10:58:35 2012] Updating source flux to 3.2e-13
[Tue Mar 13 10:58:41 2012] Flag c found in src. 6 procflags, skipping spectral fitting
[Tue Mar 13 10:58:41 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting