[Tue Mar 13 12:21:37 2012] Detection parameters:
  Position = (321.6, 398.0) = 3 18 22.06 -66 28 54.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.9 +/- 17.4
  Background counts = 23.3
  Rate = 0.006 +/- 0.001

[Tue Mar 13 12:21:38 2012] Off-axis axis estimate = 7.41'
[Tue Mar 13 12:22:00 2012] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 12:22:00 2012] Initial guess for spatial extent in simple fitting = 10.13"
[Tue Mar 13 12:22:00 2012] source mask rpix=2.3, npix_max = 32, mask sum = 19, frac = 0.593
[Tue Mar 13 12:22:00 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.13"
[Tue Mar 13 12:22:01 2012] fullrun_mos2_xmm0150280401_pi300-10000_cl_pass0_src7.ximg exists
[Tue Mar 13 12:22:01 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0150280401_pi300-10000_cl_pass0_src7.csv
[Tue Mar 13 12:22:01 2012] fullrun_mos2_xmm0150280401_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Mar 13 12:22:01 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0150280401_pi300-10000_cl_pass0_src7.csv
[Tue Mar 13 12:22:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150280401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150280401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 12:22:01 2012] fullrun_mos2_xmm0150280401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Mar 13 12:22:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150280401_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue Mar 13 12:22:01 2012] fullrun_mos2_xmm0150280401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Mar 13 12:22:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150280401_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue Mar 13 12:22:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150280401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150280401_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 12:22:14 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 12.461417 pixels away
[Tue Mar 13 12:22:14 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 12:22:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 12:22:14 2012] Assessing source extent using major
[Tue Mar 13 12:22:14 2012] Source does appear to be extended
[Tue Mar 13 12:22:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 12:22:14 2012] Source is confused with source 4
[Tue Mar 13 12:22:26 2012] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 12:22:26 2012] Initial guess for spatial extent in simple fitting = 10.13"
[Tue Mar 13 12:22:26 2012] source mask rpix=2.3, npix_max = 32, mask sum = 19, frac = 0.593
[Tue Mar 13 12:22:26 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 10.13"
[Tue Mar 13 12:22:27 2012] fullrun_mos2_xmm0150280401_pi300-10000_cl_pass1_src7.ximg exists
[Tue Mar 13 12:22:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0150280401_pi300-10000_cl_pass1_src7.csv
[Tue Mar 13 12:22:27 2012] fullrun_mos2_xmm0150280401_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Mar 13 12:22:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0150280401_pi300-10000_cl_pass1_src7.csv
[Tue Mar 13 12:22:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150280401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150280401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 12:22:27 2012] fullrun_mos2_xmm0150280401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Mar 13 12:22:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150280401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue Mar 13 12:22:27 2012] fullrun_mos2_xmm0150280401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Mar 13 12:22:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150280401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue Mar 13 12:22:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150280401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150280401_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 12:22:40 2012] Source 11 is offset by 6.734725 and -4.139449 pixels which is larger than
2 X fitted extent = 1.146179 x 1.146179, not incorporating fit results
[Tue Mar 13 12:22:40 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 16.827592 pixels away
[Tue Mar 13 12:22:40 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 12:22:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 12:22:40 2012] Assessing source extent using major
[Tue Mar 13 12:22:40 2012] Source does appear to be extended
[Tue Mar 13 12:22:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 12:22:57 2012] XMMSAS src. selection expression = ellipse(27927.679108, 34580.109894, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 13 12:22:57 2012] Not overwriting source region fullrun_mos2_xmm0150280401_pi300-10000_pass1_cl_src11_src.reg
[Tue Mar 13 12:22:57 2012] Extracting stamp from image fullrun_mos2_xmm0150280401_pi300-10000_cl_sm2.00.img.gz, (284, 361) - (359, 436)
[Tue Mar 13 12:22:57 2012] XMMSAS bgd. selection expression = annulus(27927.679108, 34580.109894, 1087.500000, 2175.000000, X, Y) && !ellipse(28192.316498, 34108.717407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28316.628140, 33125.703600, 434.415213, 434.415213, 0.000000, X, Y)
[Tue Mar 13 12:22:57 2012] Writing fullrun_mos2_xmm0150280401_pi300-10000_pass1_cl_src11.gif
[Tue Mar 13 12:22:58 2012] ../../xmm0150280401/products/events/fullrun_mos2_xmm0150280401_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0150280401/products/events/fullrun_mos2_xmm0150280401_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Tue Mar 13 12:22:58 2012] Mean detx,y = (6485.72, 5096.04) 
[Tue Mar 13 12:22:58 2012] ../../xmm0150280401/products/images/fullrun_mos2_xmm0150280401_pi300-10000_pass1_cl_src11_src.img and ../../xmm0150280401/products/images/fullrun_mos2_xmm0150280401_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Tue Mar 13 12:22:58 2012] ../../xmm0150280401/products/spectra/fullrun_mos2_xmm0150280401_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0150280401/products/spectra/fullrun_mos2_xmm0150280401_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Tue Mar 13 12:22:58 2012] Setting source spectrum file to fullrun_mos2_xmm0150280401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Mar 13 12:22:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0150280401_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Mar 13 12:22:58 2012] ../../xmm0150280401/products/lightcurves/fullrun_mos2_xmm0150280401_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0150280401/products/lightcurves/fullrun_mos2_xmm0150280401_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Tue Mar 13 12:23:00 2012] Not generating rmf since there are only 91 counts
[Tue Mar 13 12:23:00 2012] rmf not generated due to insufficient counts
[Tue Mar 13 12:23:00 2012] fullrun_mos2_xmm0150280401_pi300-10000_pass1_cl_src11.arf exists, delete to re-create
[Tue Mar 13 12:23:28 2012] Updating aperture counts using extracted products
[Tue Mar 13 12:23:28 2012] Error reading totcts from fullrun_mos2_xmm0150280401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Mar 13 12:23:29 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 12:23:29 2012] Using photon index=1.80, rate=0.00603, arf fullrun_mos2_xmm0150280401_pi300-10000_pass1_cl_src11.arf
[Tue Mar 13 12:23:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 12:23:29 2012] Updating source flux to 1.6e-13
[Tue Mar 13 12:23:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting