[Sat Dec 31 10:26:16 2011] Detection parameters:
  Position = (342.4, 226.4) = 19 56 56.25 -57 44 50.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.3 +/- 9.8
  Background counts = 14.1
  Rate = 0.003 +/- 0.0006

[Sat Dec 31 10:26:16 2011] Off-axis axis estimate = 6.12'
[Sat Dec 31 10:46:15 2011] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 10:46:15 2011] Initial guess for spatial extent in simple fitting = 9.49"
[Sat Dec 31 10:46:15 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.869
[Sat Dec 31 10:46:15 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 9.49"
[Sat Dec 31 11:22:04 2011] fullrun_mos1_xmm0150190201_pi300-10000_cl_pass0_src9.ximg exists
[Sat Dec 31 11:22:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150190201_pi300-10000_cl_pass0_src9.csv
[Sat Dec 31 11:22:04 2011] fullrun_mos1_xmm0150190201_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Dec 31 11:22:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150190201_pi300-10000_cl_pass0_src9.csv
[Sat Dec 31 11:22:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150190201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150190201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 11:22:04 2011] fullrun_mos1_xmm0150190201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Dec 31 11:22:04 2011] fullrun_mos1_xmm0150190201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Dec 31 11:22:04 2011] Fit fullrun_mos1_xmm0150190201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Dec 31 11:47:37 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 12.495661 pixels away
[Sat Dec 31 11:47:37 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 11:47:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 11:47:37 2011] Assessing source extent using major
[Sat Dec 31 11:47:37 2011] Source does appear to be extended
[Sat Dec 31 11:47:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 11:55:52 2011] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 11:55:52 2011] Initial guess for spatial extent in simple fitting = 9.49"
[Sat Dec 31 11:55:52 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.869
[Sat Dec 31 11:55:52 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 9.49"
[Sat Dec 31 12:29:41 2011] fullrun_mos1_xmm0150190201_pi300-10000_cl_pass1_src9.ximg exists
[Sat Dec 31 12:29:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150190201_pi300-10000_cl_pass1_src9.csv
[Sat Dec 31 12:29:41 2011] fullrun_mos1_xmm0150190201_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Dec 31 12:29:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150190201_pi300-10000_cl_pass1_src9.csv
[Sat Dec 31 12:29:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150190201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150190201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 12:29:42 2011] fullrun_mos1_xmm0150190201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Dec 31 12:29:42 2011] fullrun_mos1_xmm0150190201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Dec 31 12:29:42 2011] Fit fullrun_mos1_xmm0150190201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sat Dec 31 12:53:03 2011] Spatial fit model total counts = 137.706000, observed total counts = 139.000000
[Sat Dec 31 12:53:03 2011] Offset between fit and detection position for source 12 = 0.582750 pixels
[Sat Dec 31 12:53:03 2011] 131.002600 total counts/ 82.629000 bgd. counts: snr = 5.321599
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.582750 pixels
  Position = (342.5, 226.9) = 19 56 56.24 -57 44 47.5
  Extent = 6.4 (4.7-8.5)", rotation angle = 0
  Source counts = 48.4 +/- 11.4
  Background counts = 82.6
  Rate = 0.002 +/- 0.0005
[Sat Dec 31 12:53:03 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 12:53:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 12:53:03 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 12:53:03 2011] Source does appear to be extended
[Sat Dec 31 12:53:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 13:21:27 2011] XMMSAS src. selection expression = ellipse(29746.124200, 19695.939080, 381.626411, 381.626411, 0.000000, X, Y)
[Sat Dec 31 13:21:27 2011] Writing source region out to fullrun_mos1_xmm0150190201_pi300-10000_pass1_cl_src12_src.reg
[Sat Dec 31 13:21:27 2011] Extracting stamp from image fullrun_mos1_xmm0150190201_pi300-10000_cl_sm2.00.img.gz, (321, 205) - (364, 249)
[Sat Dec 31 13:21:27 2011] XMMSAS bgd. selection expression = annulus(29746.124200, 19695.939080, 636.044018, 1272.088037, X, Y)
[Sat Dec 31 13:21:27 2011] Writing fullrun_mos1_xmm0150190201_pi300-10000_pass1_cl_src12.gif
[Sat Dec 31 13:25:27 2011] Mean detx,y = (-6894.61, 3467.69) 
[Sat Dec 31 13:25:29 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 13:25:50 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 13:25:51 2011] Setting source spectrum file to fullrun_mos1_xmm0150190201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Dec 31 13:25:51 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0150190201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat Dec 31 13:35:10 2011] Not generating rmf since there are only 48 counts
[Sat Dec 31 13:35:10 2011] rmf not generated due to insufficient counts
[Sat Dec 31 13:55:09 2011] Updating aperture counts using extracted products
[Sat Dec 31 13:55:09 2011] Error reading totcts from fullrun_mos1_xmm0150190201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Dec 31 13:55:10 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 13:55:10 2011] Using photon index=1.80, rate=0.0021, arf fullrun_mos1_xmm0150190201_pi300-10000_pass1_cl_src12.arf
[Sat Dec 31 13:55:10 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 13:55:10 2011] Updating source flux to 3.2e-14
[Sat Dec 31 13:55:13 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting