[Sun May 12 02:25:29 2013] Detection parameters:
  Position = (240.2, 270.0) = 8 24 33.58 -43 2 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1412.4 +/- 54.0
  Background counts = 236.6
  Rate = 0.1 +/- 0.005

[Sun May 12 02:25:31 2013] Off-axis axis estimate = 4.70'
[Sun May 12 02:26:52 2013] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:26:52 2013] Initial guess for spatial extent in simple fitting = 8.78"
[Sun May 12 02:26:52 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.986
[Sun May 12 02:26:52 2013] Giving source the simple spatial ID 65 for pass 0, mean size = 8.78"
[Sun May 12 02:26:55 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_src65.ximg exists
[Sun May 12 02:26:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_src65.csv
[Sun May 12 02:26:55 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_src65_1.ximg exists
[Sun May 12 02:26:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_src65.csv
[Sun May 12 02:26:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:26:57 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Sun May 12 02:26:57 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Sun May 12 02:26:57 2013] Fit fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Sun May 12 02:27:43 2013] Spatial fit model total counts = 2823.840000, observed total counts = 2817.000000
[Sun May 12 02:27:43 2013] Offset between fit and detection position for source 70 = 6.379297 pixels
[Sun May 12 02:27:43 2013] 2754.188000 total counts/ 2146.750000 bgd. counts: snr = 13.110257
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 6.379297 pixels
  Position = (245.7, 273.2) = 8 24 31.40 -43 2 9.1
  Extent = 17.6 (17.5-35.1)", rotation angle = 0
  Source counts = 607.4 +/- 52.5
  Background counts = 2146.8
  Rate = 0.3 +/- 0.02
[Sun May 12 02:27:43 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:27:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:27:43 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:27:43 2013] Source does appear to be extended
[Sun May 12 02:27:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:28:54 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 02:28:54 2013] Initial guess for spatial extent in simple fitting = 17.56"
[Sun May 12 02:28:54 2013] source mask rpix=4.0, npix_max = 82, mask sum = 81, frac = 0.984
[Sun May 12 02:28:54 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 17.56"
[Sun May 12 02:28:56 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_src59.ximg exists
[Sun May 12 02:28:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_src59.csv
[Sun May 12 02:28:56 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_src59_1.ximg exists
[Sun May 12 02:28:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_src59.csv
[Sun May 12 02:28:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:28:59 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Sun May 12 02:28:59 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Sun May 12 02:28:59 2013] Fit fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Sun May 12 02:29:40 2013] Warning, spatial fit 59 centroid is now closest to src. 69
[Sun May 12 02:29:40 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:29:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:29:40 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:29:40 2013] Source does appear to be extended
[Sun May 12 02:29:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:29:40 2013] Source is confused with source 72
[Sun May 12 02:30:50 2013] XMMSAS src. selection expression = ellipse(21328.600000, 23719.773400, 1053.360030, 1053.360030, 0.000000, X, Y)
[Sun May 12 02:30:50 2013] Not overwriting source region fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src70_src.reg
[Sun May 12 02:30:50 2013] Extracting stamp from image fullrun_pn_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (185, 213) - (306, 334)
[Sun May 12 02:30:50 2013] XMMSAS bgd. selection expression = annulus(21328.600000, 23719.773400, 1755.600051, 3511.200101, X, Y) && !ellipse(24918.962738, 28927.629517, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24917.857960, 26413.248000, 1108.184032, 1108.184032, 0.000000, X, Y) && !ellipse(23874.598000, 24813.084000, 1195.352034, 1195.352034, 0.000000, X, Y) && !ellipse(22994.010800, 21572.634000, 1854.544053, 1285.072037, 268.789000, X, Y) && !ellipse(23348.552734, 26420.140198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19437.985306, 26209.463623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22742.268829, 24397.791107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22354.093800, 22819.488000, 1333.208038, 1333.208038, 0.000000, X, Y) && !ellipse(20733.544000, 22392.012000, 2563.208074, 2563.208074, 0.000000, X, Y) && !ellipse(25306.806000, 21675.779400, 1321.904038, 720.578421, 327.654000, X, Y) && !ellipse(17971.069672, 21770.448456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20603.670609, 21574.014786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25002.635986, 21611.232986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21363.346800, 21704.614000, 1421.448041, 1421.448041, 0.000000, X, Y) && !ellipse(19768.651000, 21064.395000, 811.984023, 811.984023, 0.000000, X, Y) && !ellipse(23879.006800, 20229.332600, 1229.984035, 1229.984035, 0.000000, X, Y) && !ellipse(21386.629456, 20702.647446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21185.734800, 20333.322200, 1523.672044, 1523.672044, 0.000000, X, Y) && !ellipse(19695.170000, 21083.016000, 1561.464045, 1561.464045, 0.000000, X, Y) && !ellipse(19326.008118, 20146.709534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20860.056000, 19897.238000, 1593.504046, 1593.504046, 0.000000, X, Y) && !ellipse(23279.896332, 19730.031891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21628.379680, 19048.298000, 1584.912046, 1584.912046, 0.000000, X, Y) && !ellipse(20822.044000, 19355.324000, 1350.656039, 1350.656039, 0.000000, X, Y)
[Sun May 12 02:30:50 2013] Writing fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src70.gif
[Sun May 12 02:31:02 2013] ../../xmm0150150201/products/events/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src70_src.evt and ../../xmm0150150201/products/events/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src70_bgd.evt exist, delete to re-create
[Sun May 12 02:31:02 2013] Mean detx,y = (-5770.88, 293.96) 
[Sun May 12 02:31:02 2013] ../../xmm0150150201/products/images/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src70_src.img and ../../xmm0150150201/products/images/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src70_bgd.img exist, delete to re-create
[Sun May 12 02:31:02 2013] ../../xmm0150150201/products/spectra/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src70_src.pi and ../../xmm0150150201/products/spectra/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src70_bgd.pi exist, delete to re-create
[Sun May 12 02:31:02 2013] Setting source spectrum file to fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src70_src.pi.gz
[Sun May 12 02:31:02 2013] Setting bgd. spectrum file to fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Sun May 12 02:31:02 2013] ../../xmm0150150201/products/lightcurves/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src70_src.lc and ../../xmm0150150201/products/lightcurves/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src70_bgd.lc exist, delete to re-create
[Sun May 12 04:25:16 2013] Updating aperture counts using extracted products
[Sun May 12 04:25:16 2013] Total counts from fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src70_src.pi.gz = 8879.00
[Sun May 12 04:25:16 2013] Total counts from fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src70_bgd.pi.gz = 7180.00
[Sun May 12 04:25:16 2013] Got source and background scale factors 3436536.000000, 7402345.000000
[Sun May 12 04:25:16 2013] User source parameters:
  Position = (245.7, 273.2) = 8 24 31.40 -43 2 9.1
  Extent = 17.6 (17.5-35.1)", rotation angle = 0
  Source aperture counts = 5545.7 +/- 95.2
  Background aperture counts = 3333.3
  Rate = 2 +/- 0.04

[Sun May 12 04:25:30 2013] No arf file for this source, not re-computing flux
[Sun May 12 04:26:31 2013] Flag c found in src. 70 procflags, skipping spectral fitting
[Sun May 12 04:26:31 2013] Source 70 has no response, skipping
[Sun May 12 04:26:32 2013] xmm0150150201/analysis//spectral/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src70_pl.csv not found, spectral fit skipped or did not complete