[Sun May 12 02:25:26 2013] Detection parameters:
  Position = (406.2, 414.0) = 8 23 27.85 -42 51 56.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 988.0 +/- 53.7
  Background counts = 527.4
  Rate = 0.09 +/- 0.005

[Sun May 12 02:25:31 2013] Off-axis axis estimate = 11.45'
[Sun May 12 02:26:52 2013] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:26:52 2013] Initial guess for spatial extent in simple fitting = 12.16"
[Sun May 12 02:26:52 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.829
[Sun May 12 02:26:52 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 12.16"
[Sun May 12 02:26:54 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_src29.ximg exists
[Sun May 12 02:26:54 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_src29_1.ximg exists
[Sun May 12 02:26:54 2013] Fit fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_src29 appears to have run properly
[Sun May 12 02:26:56 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sun May 12 02:26:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src29.csv
[Sun May 12 02:26:56 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sun May 12 02:26:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src29.csv
[Sun May 12 02:26:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:27:42 2013] Source 31 is offset by 0.867684 and 6.197948 pixels which is larger than
2 X fitted extent = 1.329476 x 1.329476, not incorporating fit results
[Sun May 12 02:27:42 2013] Spatial fit model total counts = 2559.820000, observed total counts = 2584.000000
[Sun May 12 02:27:42 2013] Offset between fit and detection position for source 31 = 1.152196 pixels
[Sun May 12 02:27:42 2013] 2503.460000 total counts/ 1430.740000 bgd. counts: snr = 28.359986
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.152196 pixels
  Position = (406.6, 415.0) = 8 23 27.67 -42 51 51.7
  Extent = 20.4" x 20.4", rotation angle = 0
  Source counts = 1072.7 +/- 50.0
  Background counts = 1430.7
  Rate = 0.4 +/- 0.02
[Sun May 12 02:27:43 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:27:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:27:43 2013] Assessing source extent using major
[Sun May 12 02:27:43 2013] Source does appear to be extended
[Sun May 12 02:27:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:28:54 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 02:28:54 2013] Initial guess for spatial extent in simple fitting = 20.40"
[Sun May 12 02:28:54 2013] source mask rpix=4.7, npix_max = 107, mask sum = 107, frac = 0.994
[Sun May 12 02:28:54 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 20.40"
[Sun May 12 02:28:55 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_src27.ximg exists
[Sun May 12 02:28:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_src27.csv
[Sun May 12 02:28:55 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun May 12 02:28:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_src27.csv
[Sun May 12 02:28:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:28:59 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun May 12 02:28:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sun May 12 02:28:59 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun May 12 02:28:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sun May 12 02:28:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:29:40 2013] Warning, spatial fit 27 centroid is now closest to src. 36
[Sun May 12 02:29:40 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:29:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:29:40 2013] Assessing source extent using major
[Sun May 12 02:29:40 2013] Source does appear to be extended
[Sun May 12 02:29:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:30:46 2013] Counts = 1072.720000, rescaling region sizes by 2.000000
[Sun May 12 02:30:46 2013] XMMSAS src. selection expression = ellipse(35328.851600, 36059.378800, 2447.616070, 2447.616070, 0.000000, X, Y)
[Sun May 12 02:30:46 2013] Not overwriting source region fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src31_src.reg
[Sun May 12 02:30:46 2013] Extracting stamp from image fullrun_pn_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (266, 274) - (547, 556)
[Sun May 12 02:30:47 2013] XMMSAS bgd. selection expression = annulus(35328.851600, 36059.378800, 8158.720235, 16317.440470, X, Y) && !ellipse(24918.962738, 28927.629517, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26328.216800, 27001.014600, 876.312025, 876.312025, 0.000000, X, Y) && !ellipse(26183.535200, 27777.768000, 1159.656033, 1159.656033, 0.000000, X, Y) && !ellipse(36108.474854, 32958.659607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25571.051200, 31118.458000, 1351.336039, 1351.336039, 0.000000, X, Y) && !ellipse(25789.183000, 29992.770200, 1298.672037, 1298.672037, 0.000000, X, Y) && !ellipse(25105.906006, 28207.670532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31933.478455, 26260.777374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32693.400940, 24681.170349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24917.857960, 26413.248000, 1108.184032, 1108.184032, 0.000000, X, Y) && !ellipse(23874.598000, 24813.084000, 1195.352034, 1195.352034, 0.000000, X, Y) && !ellipse(22994.010800, 21572.634000, 1854.544053, 1285.072037, 268.789000, X, Y) && !ellipse(34359.707947, 34887.817169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31449.336517, 40602.542053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30411.151031, 39265.862244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29832.827240, 38407.480652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26694.396000, 37608.130200, 1152.216033, 1152.216033, 0.000000, X, Y) && !ellipse(30325.202000, 38240.156000, 2563.352074, 2563.352074, 0.000000, X, Y) && !ellipse(29272.159393, 37347.356659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31108.274000, 36370.862000, 1809.968052, 1809.968052, 0.000000, X, Y) && !ellipse(28958.921692, 36391.601868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26089.450989, 36217.785065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32496.760000, 36103.958800, 1827.360053, 1827.360053, 0.000000, X, Y) && !ellipse(28373.048000, 36396.559400, 1725.320050, 1725.320050, 0.000000, X, Y) && !ellipse(27273.528000, 35862.375400, 1695.888049, 1695.888049, 0.000000, X, Y) && !ellipse(26680.375549, 34930.709167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26046.351898, 34573.708618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36598.399445, 34390.798340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25300.339111, 34052.199799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35888.715424, 33806.551178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25742.316528, 33101.709930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35556.262000, 32472.463200, 1044.856030, 1044.856030, 0.000000, X, Y) && !ellipse(36405.572632, 32463.443542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37641.730377, 32242.274292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38180.518127, 31689.996338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26349.094269, 32332.996643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38100.994690, 30697.522491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37400.738678, 30660.006927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36946.882660, 30312.617584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37468.149872, 30134.313782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38437.588684, 30193.327118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30599.113831, 29835.230042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36053.181213, 29896.893097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35056.002655, 29214.582428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37272.944153, 29109.913208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36306.340912, 28166.321106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30397.121857, 29185.013367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30925.183289, 27859.874969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35852.482239, 27667.772980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35338.030487, 27318.402985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29681.902100, 27515.188446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30249.024323, 26846.211334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23348.552734, 26420.140198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19437.985306, 26209.463623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30958.710999, 25974.023590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33515.820160, 25771.035980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31610.658752, 25689.027435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22742.268829, 24397.791107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21328.600000, 23719.773400, 1404.480040, 1404.480040, 0.000000, X, Y) && !ellipse(22354.093800, 22819.488000, 1333.208038, 1333.208038, 0.000000, X, Y) && !ellipse(20733.544000, 22392.012000, 2563.208074, 2563.208074, 0.000000, X, Y) && !ellipse(25834.000000, 22259.494232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25306.806000, 21675.779400, 1321.904038, 720.578421, 327.654000, X, Y) && !ellipse(20603.670609, 21574.014786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25002.635986, 21611.232986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21363.346800, 21704.614000, 1421.448041, 1421.448041, 0.000000, X, Y) && !ellipse(19768.651000, 21064.395000, 811.984023, 811.984023, 0.000000, X, Y) && !ellipse(23879.006800, 20229.332600, 1229.984035, 1229.984035, 0.000000, X, Y) && !ellipse(21386.629456, 20702.647446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21185.734800, 20333.322200, 1523.672044, 1523.672044, 0.000000, X, Y) && !ellipse(19695.170000, 21083.016000, 1561.464045, 1561.464045, 0.000000, X, Y) && !ellipse(19326.008118, 20146.709534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20860.056000, 19897.238000, 1593.504046, 1593.504046, 0.000000, X, Y) && !ellipse(23279.896332, 19730.031891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21628.379680, 19048.298000, 1584.912046, 1584.912046, 0.000000, X, Y) && !ellipse(26133.322693, 19007.796219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20822.044000, 19355.324000, 1350.656039, 1350.656039, 0.000000, X, Y) && !ellipse(32004.588000, 40808.591000, 2074.904060, 2074.904060, 0.000000, X, Y)
[Sun May 12 02:30:47 2013] Writing fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src31.gif
[Sun May 12 02:31:01 2013] ../../xmm0150150201/products/events/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src31_src.evt and ../../xmm0150150201/products/events/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src31_bgd.evt exist, delete to re-create
[Sun May 12 02:31:01 2013] Mean detx,y = (12271.20, -23.53) 
[Sun May 12 02:31:01 2013] ../../xmm0150150201/products/images/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src31_src.img and ../../xmm0150150201/products/images/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src31_bgd.img exist, delete to re-create
[Sun May 12 02:31:01 2013] ../../xmm0150150201/products/spectra/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src31_src.pi and ../../xmm0150150201/products/spectra/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src31_bgd.pi exist, delete to re-create
[Sun May 12 02:31:01 2013] Setting source spectrum file to fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src31_src.pi.gz
[Sun May 12 02:31:01 2013] Setting bgd. spectrum file to fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sun May 12 02:31:01 2013] ../../xmm0150150201/products/lightcurves/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src31_src.lc and ../../xmm0150150201/products/lightcurves/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src31_bgd.lc exist, delete to re-create
[Sun May 12 04:25:02 2013] Updating aperture counts using extracted products
[Sun May 12 04:25:02 2013] Total counts from fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src31_src.pi.gz = 13576.00
[Sun May 12 04:25:03 2013] Total counts from fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src31_bgd.pi.gz = 55319.00
[Sun May 12 04:25:03 2013] Got source and background scale factors 13110552.000000, 72487259.000000
[Sun May 12 04:25:03 2013] User source parameters:
  Position = (406.6, 415.0) = 8 23 27.67 -42 51 51.7
  Extent = 20.4" x 20.4", rotation angle = 0
  Source aperture counts = 3570.6 +/- 117.5
  Background aperture counts = 10005.4
  Rate = 1 +/- 0.05

[Sun May 12 04:25:30 2013] No arf file for this source, not re-computing flux
[Sun May 12 04:26:31 2013] Flag b found in src. 31 procflags, skipping spectral fitting
[Sun May 12 04:26:31 2013] Source 31 has no response, skipping
[Sun May 12 04:26:32 2013] xmm0150150201/analysis//spectral/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete