[Sun May 12 02:25:24 2013] Detection parameters:
  Position = (287.0, 306.0) = 8 24 15.01 -42 59 46.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3428.2 +/- 76.8
  Background counts = 193.3
  Rate = 0.3 +/- 0.007

[Sun May 12 02:25:31 2013] Off-axis axis estimate = 1.00'
[Sun May 12 02:26:52 2013] Using EEF radius (= 6.93 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:26:52 2013] Initial guess for spatial extent in simple fitting = 6.93"
[Sun May 12 02:26:52 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.914
[Sun May 12 02:26:52 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 6.93"
[Sun May 12 02:26:54 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_src8.ximg exists
[Sun May 12 02:26:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_src8.csv
[Sun May 12 02:26:54 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun May 12 02:26:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_src8.csv
[Sun May 12 02:26:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:26:56 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun May 12 02:26:56 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun May 12 02:26:56 2013] Fit fullrun_pn_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sun May 12 02:27:42 2013] Spatial fit model total counts = 3486.440000, observed total counts = 3462.000000
[Sun May 12 02:27:42 2013] Offset between fit and detection position for source 10 = 1.870757 pixels
[Sun May 12 02:27:42 2013] 3643.849000 total counts/ 2844.110000 bgd. counts: snr = 14.995988
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.870757 pixels
  Position = (287.0, 304.2) = 8 24 15.03 -42 59 54.5
  Extent = 13.9 (13.8-27.7)", rotation angle = 0
  Source counts = 799.7 +/- 60.4
  Background counts = 2844.1
  Rate = 0.3 +/- 0.03
[Sun May 12 02:27:43 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:27:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:27:43 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:27:43 2013] Source does appear to be extended
[Sun May 12 02:27:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:28:54 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 02:28:54 2013] Initial guess for spatial extent in simple fitting = 13.85"
[Sun May 12 02:28:54 2013] source mask rpix=3.2, npix_max = 54, mask sum = 64, frac = 1.179
[Sun May 12 02:28:54 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 13.85"
[Sun May 12 02:28:55 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_src8.ximg exists
[Sun May 12 02:28:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_src8.csv
[Sun May 12 02:28:55 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun May 12 02:28:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_src8.csv
[Sun May 12 02:28:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:28:57 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun May 12 02:28:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun May 12 02:28:57 2013] fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun May 12 02:28:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun May 12 02:28:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:29:40 2013] Warning, spatial fit 8 centroid is now closest to src. 7
[Sun May 12 02:29:40 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:29:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:29:40 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:29:40 2013] Source does appear to be extended
[Sun May 12 02:29:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:30:44 2013] XMMSAS src. selection expression = ellipse(24917.857960, 26413.248000, 831.138024, 831.138024, 0.000000, X, Y)
[Sun May 12 02:30:44 2013] Not overwriting source region fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src10_src.reg
[Sun May 12 02:30:44 2013] Extracting stamp from image fullrun_pn_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (239, 256) - (335, 352)
[Sun May 12 02:30:44 2013] XMMSAS bgd. selection expression = annulus(24917.857960, 26413.248000, 1385.230040, 2770.460080, X, Y) && !ellipse(24918.962738, 28927.629517, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26328.216800, 27001.014600, 876.312025, 876.312025, 0.000000, X, Y) && !ellipse(26183.535200, 27777.768000, 1159.656033, 1159.656033, 0.000000, X, Y) && !ellipse(25789.183000, 29992.770200, 1298.672037, 1298.672037, 0.000000, X, Y) && !ellipse(25105.906006, 28207.670532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23874.598000, 24813.084000, 1195.352034, 1195.352034, 0.000000, X, Y) && !ellipse(23348.552734, 26420.140198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22742.268829, 24397.791107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21328.600000, 23719.773400, 1404.480040, 1404.480040, 0.000000, X, Y) && !ellipse(22354.093800, 22819.488000, 1333.208038, 1333.208038, 0.000000, X, Y) && !ellipse(20733.544000, 22392.012000, 2563.208074, 2563.208074, 0.000000, X, Y)
[Sun May 12 02:30:44 2013] Writing fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src10.gif
[Sun May 12 02:30:58 2013] ../../xmm0150150201/products/events/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0150150201/products/events/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sun May 12 02:30:58 2013] Mean detx,y = (-1329.69, 429.67) 
[Sun May 12 02:30:58 2013] ../../xmm0150150201/products/images/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src10_src.img and ../../xmm0150150201/products/images/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Sun May 12 02:30:58 2013] ../../xmm0150150201/products/spectra/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src10_src.pi and ../../xmm0150150201/products/spectra/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sun May 12 02:30:58 2013] Setting source spectrum file to fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src10_src.pi.gz
[Sun May 12 02:30:58 2013] Setting bgd. spectrum file to fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun May 12 02:30:58 2013] ../../xmm0150150201/products/lightcurves/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0150150201/products/lightcurves/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sun May 12 04:24:55 2013] Updating aperture counts using extracted products
[Sun May 12 04:24:55 2013] Total counts from fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src10_src.pi.gz = 3552.00
[Sun May 12 04:24:55 2013] Total counts from fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src10_bgd.pi.gz = 9838.00
[Sun May 12 04:24:55 2013] Got source and background scale factors 1987918.000000, 4977627.000000
[Sun May 12 04:24:55 2013] User source parameters:
  Position = (287.0, 304.2) = 8 24 15.03 -42 59 54.5
  Extent = 13.9 (13.8-27.7)", rotation angle = 0
  Source aperture counts = -377.0 +/- 60.6
  Background aperture counts = 3929.0
  Rate = -0.2 +/- 0.03

[Sun May 12 04:25:30 2013] No arf file for this source, not re-computing flux
[Sun May 12 04:26:31 2013] Source 10 has no response, skipping
[Sun May 12 04:26:32 2013] xmm0150150201/analysis//spectral/fullrun_pn_xmm0150150201_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete