[Sun May 12 02:25:43 2013] Detection parameters:
  Position = (299.3, 365.9) = 8 24 10.14 -42 55 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 271.5 +/- 22.0
  Background counts = 30.5
  Rate = 1 +/- 0.08

[Sun May 12 02:25:47 2013] Off-axis axis estimate = 4.89'
[Sun May 12 02:27:06 2013] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:27:06 2013] Initial guess for spatial extent in simple fitting = 8.87"
[Sun May 12 02:27:06 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.969
[Sun May 12 02:27:06 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 8.87"
[Sun May 12 02:27:07 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src8.ximg exists
[Sun May 12 02:27:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src8.csv
[Sun May 12 02:27:07 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun May 12 02:27:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src8.csv
[Sun May 12 02:27:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:27:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun May 12 02:27:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun May 12 02:27:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun May 12 02:27:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun May 12 02:27:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:28:33 2013] Spatial fit model total counts = 1396.540000, observed total counts = 700.000000
[Sun May 12 02:28:33 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 12 02:28:33 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:28:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:28:33 2013] Assessing source extent using major
[Sun May 12 02:28:33 2013] Source does appear to be extended
[Sun May 12 02:28:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:29:07 2013] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:29:07 2013] Initial guess for spatial extent in simple fitting = 8.87"
[Sun May 12 02:29:07 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.969
[Sun May 12 02:29:07 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 8.87"
[Sun May 12 02:29:08 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src7.ximg exists
[Sun May 12 02:29:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src7.csv
[Sun May 12 02:29:08 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun May 12 02:29:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src7.csv
[Sun May 12 02:29:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:29:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun May 12 02:29:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun May 12 02:29:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun May 12 02:29:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun May 12 02:29:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:30:16 2013] Source 8 is offset by -5.092614 and 8.531165 pixels which is larger than
2 X fitted extent = 1.422009 x 1.422009, not incorporating fit results
[Sun May 12 02:30:16 2013] Spatial fit model total counts = 871.385000, observed total counts = 700.000000
[Sun May 12 02:30:16 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 12 02:30:16 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:30:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:30:16 2013] Assessing source extent using major
[Sun May 12 02:30:16 2013] Source does appear to be extended
[Sun May 12 02:30:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 04:24:02 2013] XMMSAS src. selection expression = ellipse(25989.162567, 31785.431366, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 04:24:02 2013] Not overwriting source region fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src8_src.reg
[Sun May 12 04:24:02 2013] Extracting stamp from image fullrun_mos2_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (262, 328) - (337, 403)
[Sun May 12 04:24:02 2013] XMMSAS bgd. selection expression = annulus(25989.162567, 31785.431366, 1087.500000, 2175.000000, X, Y) && !ellipse(25020.171600, 28748.627200, 1195.832034, 1195.832034, 0.000000, X, Y) && !ellipse(25485.253000, 29973.646620, 989.720028, 989.720028, 0.000000, X, Y) && !ellipse(26082.088000, 29941.242000, 1327.432038, 1327.432038, 0.000000, X, Y) && !ellipse(25966.658539, 29270.701782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25418.682800, 31138.943000, 1041.608030, 1041.608030, 0.000000, X, Y) && !ellipse(24360.057831, 29769.130432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24382.081299, 30799.897766, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 04:24:02 2013] Writing fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src8.gif
[Sun May 12 04:24:03 2013] ../../xmm0150150201/products/events/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src8_src.evt and ../../xmm0150150201/products/events/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src8_bgd.evt exist, delete to re-create
[Sun May 12 04:24:03 2013] Mean detx,y = (-2751.28, 2610.68) 
[Sun May 12 04:24:03 2013] ../../xmm0150150201/products/images/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src8_src.img and ../../xmm0150150201/products/images/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src8_bgd.img exist, delete to re-create
[Sun May 12 04:24:03 2013] ../../xmm0150150201/products/spectra/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src8_src.pi and ../../xmm0150150201/products/spectra/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src8_bgd.pi exist, delete to re-create
[Sun May 12 04:24:03 2013] Setting source spectrum file to fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src8_src.pi.gz
[Sun May 12 04:24:03 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun May 12 04:24:03 2013] ../../xmm0150150201/products/lightcurves/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src8_src.lc and ../../xmm0150150201/products/lightcurves/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src8_bgd.lc exist, delete to re-create
[Sun May 12 04:24:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 12 04:24:16 2013] rmf not generated due to insufficient counts
[Sun May 12 04:25:52 2013] Updating aperture counts using extracted products
[Sun May 12 04:25:52 2013] Total counts from fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src8_src.pi.gz = 567.00
[Sun May 12 04:25:52 2013] Total counts from fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src8_bgd.pi.gz = 150.00
[Sun May 12 04:25:52 2013] Got source and background scale factors 1200540.000000, 176692.000000
[Sun May 12 04:25:52 2013] User source parameters:
  Position = (299.3, 365.9) = 8 24 10.14 -42 55 25.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -452.2 +/- 24.8
  Background aperture counts = 1019.2
  Rate = -3 +/- 0.1

[Sun May 12 04:25:52 2013] Updating counts from extracted products
[Sun May 12 04:25:52 2013] Set source signif. to -452.18/31.92 = -14.16
[Sun May 12 04:26:05 2013] No arf file for this source, not re-computing flux
[Sun May 12 04:26:30 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 12 04:26:31 2013] xmm0150150201/analysis//spectral/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete