[Sun May 12 02:25:47 2013] Detection parameters:
  Position = (316.5, 311.5) = 8 24 3.31 -42 59 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.6 +/- 24.3
  Background counts = 143.2
  Rate = 0.3 +/- 0.05

[Sun May 12 02:25:47 2013] Off-axis axis estimate = 1.62'
[Sun May 12 02:27:06 2013] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:27:06 2013] Initial guess for spatial extent in simple fitting = 7.24"
[Sun May 12 02:27:06 2013] source mask rpix=1.7, npix_max = 18, mask sum = 10, frac = 0.534
[Sun May 12 02:27:06 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 7.24"
[Sun May 12 02:27:08 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src17.ximg exists
[Sun May 12 02:27:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src17.csv
[Sun May 12 02:27:08 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun May 12 02:27:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src17.csv
[Sun May 12 02:27:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:27:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun May 12 02:27:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sun May 12 02:27:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun May 12 02:27:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sun May 12 02:27:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:28:33 2013] Spatial fit model total counts = 1080.770000, observed total counts = 926.000000
[Sun May 12 02:28:33 2013] Poor agreement between spatial fit and data for source 57
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 12 02:28:33 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:28:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:28:33 2013] Assessing source extent using major
[Sun May 12 02:28:33 2013] Source does appear to be extended
[Sun May 12 02:28:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:29:07 2013] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:29:07 2013] Initial guess for spatial extent in simple fitting = 7.24"
[Sun May 12 02:29:07 2013] source mask rpix=1.7, npix_max = 18, mask sum = 10, frac = 0.534
[Sun May 12 02:29:07 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 7.24"
[Sun May 12 02:29:08 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src15.ximg exists
[Sun May 12 02:29:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src15.csv
[Sun May 12 02:29:08 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun May 12 02:29:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src15.csv
[Sun May 12 02:29:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:29:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun May 12 02:29:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun May 12 02:29:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun May 12 02:29:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun May 12 02:29:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:30:16 2013] Spatial fit model total counts = 1086.420000, observed total counts = 926.000000
[Sun May 12 02:30:16 2013] Poor agreement between spatial fit and data for source 57
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 12 02:30:16 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:30:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:30:16 2013] Assessing source extent using major
[Sun May 12 02:30:16 2013] Source does appear to be extended
[Sun May 12 02:30:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 04:24:02 2013] XMMSAS src. selection expression = ellipse(27489.163849, 27053.202728, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 04:24:02 2013] Not overwriting source region fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src57_src.reg
[Sun May 12 04:24:02 2013] Extracting stamp from image fullrun_mos2_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (279, 274) - (354, 349)
[Sun May 12 04:24:02 2013] XMMSAS bgd. selection expression = annulus(27489.163849, 27053.202728, 1087.500000, 2175.000000, X, Y) && !ellipse(25020.171600, 28748.627200, 1195.832034, 1195.832034, 0.000000, X, Y) && !ellipse(26146.518000, 27558.048000, 1099.096032, 1099.096032, 0.000000, X, Y) && !ellipse(26321.638000, 27017.638000, 985.936028, 985.936028, 0.000000, X, Y) && !ellipse(25485.253000, 29973.646620, 989.720028, 989.720028, 0.000000, X, Y) && !ellipse(26082.088000, 29941.242000, 1327.432038, 1327.432038, 0.000000, X, Y) && !ellipse(25966.658539, 29270.701782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25556.464478, 27893.657562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26278.338200, 28254.302000, 1213.968035, 1213.968035, 0.000000, X, Y) && !ellipse(24979.737400, 26544.922800, 899.280026, 899.280026, 0.000000, X, Y) && !ellipse(25597.338654, 26924.407257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25766.307373, 26398.552155, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 04:24:02 2013] Writing fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src57.gif
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/events/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src57_src.evt and ../../xmm0150150201/products/events/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src57_bgd.evt exist, delete to re-create
[Sun May 12 04:24:04 2013] Mean detx,y = (-710.19, -1825.66) 
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/images/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src57_src.img and ../../xmm0150150201/products/images/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src57_bgd.img exist, delete to re-create
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/spectra/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src57_src.pi and ../../xmm0150150201/products/spectra/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src57_bgd.pi exist, delete to re-create
[Sun May 12 04:24:04 2013] Setting source spectrum file to fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src57_src.pi.gz
[Sun May 12 04:24:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/lightcurves/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src57_src.lc and ../../xmm0150150201/products/lightcurves/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src57_bgd.lc exist, delete to re-create
[Sun May 12 04:24:17 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 12 04:24:17 2013] rmf not generated due to insufficient counts
[Sun May 12 04:25:54 2013] Updating aperture counts using extracted products
[Sun May 12 04:25:54 2013] Total counts from fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src57_src.pi.gz = 640.00
[Sun May 12 04:25:54 2013] Total counts from fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src57_bgd.pi.gz = 1162.00
[Sun May 12 04:25:55 2013] Got source and background scale factors 1156584.000000, 5380492.000000
[Sun May 12 04:25:55 2013] User source parameters:
  Position = (316.5, 311.5) = 8 24 3.31 -42 59 29.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 390.2 +/- 26.3
  Background aperture counts = 249.8
  Rate = 2 +/- 0.2

[Sun May 12 04:25:55 2013] Updating counts from extracted products
[Sun May 12 04:25:55 2013] Set source signif. to 390.22/15.80 = 24.69
[Sun May 12 04:26:05 2013] No arf file for this source, not re-computing flux
[Sun May 12 04:26:30 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 12 04:26:31 2013] xmm0150150201/analysis//spectral/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src57_pl.csv not found, spectral fit skipped or did not complete