[Sun May 12 02:25:47 2013] Detection parameters:
  Position = (291.1, 194.0) = 8 24 13.41 -43 7 51.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.3 +/- 12.6
  Background counts = 22.4
  Rate = 0.3 +/- 0.05

[Sun May 12 02:25:47 2013] Off-axis axis estimate = 7.59'
[Sun May 12 02:27:06 2013] Using EEF radius (= 10.23 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:27:06 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 12 02:27:06 2013] Initial guess for spatial extent in simple fitting = 10.23"
[Sun May 12 02:27:06 2013] source mask rpix=2.4, npix_max = 32, mask sum = 34, frac = 1.046
[Sun May 12 02:27:06 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 10.23"
[Sun May 12 02:27:08 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src19.ximg exists
[Sun May 12 02:27:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src19.csv
[Sun May 12 02:27:08 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun May 12 02:27:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src19.csv
[Sun May 12 02:27:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:27:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun May 12 02:27:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun May 12 02:27:09 2013] Fit fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sun May 12 02:28:33 2013] Spatial fit model total counts = 272.006000, observed total counts = 264.000000
[Sun May 12 02:28:33 2013] Offset between fit and detection position for source 56 = 0.200857 pixels
[Sun May 12 02:28:33 2013] 252.855300 total counts/ 212.741000 bgd. counts: snr = 2.750259
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.200857 pixels
  Position = (290.9, 194.1) = 8 24 13.46 -43 7 53.3
  Extent = 9.9 (2.6-20.5)", rotation angle = 0
  Source counts = 40.1 +/- 15.9
  Background counts = 212.7
  Rate = 0.2 +/- 0.1
[Sun May 12 02:28:33 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:28:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:28:33 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:28:33 2013] Source does appear to be extended
[Sun May 12 02:28:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:28:33 2013] Source is confused with source 64
[Sun May 12 02:29:07 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 02:29:07 2013] Initial guess for spatial extent in simple fitting = 9.86"
[Sun May 12 02:29:07 2013] source mask rpix=2.3, npix_max = 30, mask sum = 34, frac = 1.110
[Sun May 12 02:29:07 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 9.86"
[Sun May 12 02:29:08 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src16.ximg exists
[Sun May 12 02:29:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src16.csv
[Sun May 12 02:29:08 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src16_1.ximg exists
[Sun May 12 02:29:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src16.csv
[Sun May 12 02:29:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:29:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sun May 12 02:29:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sun May 12 02:29:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sun May 12 02:29:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sun May 12 02:29:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:30:16 2013] Warning, spatial fit 16 centroid is now closest to src. 64
[Sun May 12 02:30:16 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:30:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:30:16 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:30:16 2013] Source does appear to be extended
[Sun May 12 02:30:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 04:24:02 2013] XMMSAS src. selection expression = ellipse(25262.108020, 16837.835600, 591.637217, 591.637217, 0.000000, X, Y)
[Sun May 12 04:24:02 2013] Not overwriting source region fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src56_src.reg
[Sun May 12 04:24:02 2013] Extracting stamp from image fullrun_mos2_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (257, 160) - (325, 228)
[Sun May 12 04:24:02 2013] XMMSAS bgd. selection expression = annulus(25262.108020, 16837.835600, 986.062028, 1972.124057, X, Y) && !ellipse(25410.072000, 16689.274000, 1616.936047, 1616.936047, 0.000000, X, Y) && !ellipse(26799.369600, 13990.615000, 953.328027, 953.328027, 0.000000, X, Y)
[Sun May 12 04:24:02 2013] Writing fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src56.gif
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/events/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src56_src.evt and ../../xmm0150150201/products/events/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src56_bgd.evt exist, delete to re-create
[Sun May 12 04:24:04 2013] Mean detx,y = (7744.48, -7937.04) 
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/images/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src56_src.img and ../../xmm0150150201/products/images/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src56_bgd.img exist, delete to re-create
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/spectra/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src56_src.pi and ../../xmm0150150201/products/spectra/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src56_bgd.pi exist, delete to re-create
[Sun May 12 04:24:04 2013] Setting source spectrum file to fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src56_src.pi.gz
[Sun May 12 04:24:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/lightcurves/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src56_src.lc and ../../xmm0150150201/products/lightcurves/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src56_bgd.lc exist, delete to re-create
[Sun May 12 04:24:17 2013] Not generating rmf since there are only 40 counts
[Sun May 12 04:24:17 2013] rmf not generated due to insufficient counts
[Sun May 12 04:25:55 2013] Updating aperture counts using extracted products
[Sun May 12 04:25:55 2013] Total counts from fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src56_src.pi.gz = 164.00
[Sun May 12 04:25:55 2013] Total counts from fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src56_bgd.pi.gz = 240.00
[Sun May 12 04:25:55 2013] Got source and background scale factors 1041080.000000, 3527585.000000
[Sun May 12 04:25:55 2013] User source parameters:
  Position = (290.9, 194.1) = 8 24 13.46 -43 7 53.3
  Extent = 9.9 (2.6-20.5)", rotation angle = 0
  Source aperture counts = 93.2 +/- 13.8
  Background aperture counts = 70.8
  Rate = 0.6 +/- 0.08

[Sun May 12 04:26:05 2013] No arf file for this source, not re-computing flux
[Sun May 12 04:26:30 2013] Flag c found in src. 56 procflags, skipping spectral fitting
[Sun May 12 04:26:30 2013] Source 56 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 12 04:26:31 2013] xmm0150150201/analysis//spectral/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete