[Sun May 12 02:25:44 2013] Detection parameters:
  Position = (319.7, 413.3) = 8 24 2.05 -42 52 1.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.3 +/- 8.8
  Background counts = 12.7
  Rate = 0.08 +/- 0.02

[Sun May 12 02:25:47 2013] Off-axis axis estimate = 8.47'
[Sun May 12 02:27:06 2013] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:27:06 2013] Initial guess for spatial extent in simple fitting = 10.66"
[Sun May 12 02:27:06 2013] source mask rpix=2.5, npix_max = 34, mask sum = 25, frac = 0.717
[Sun May 12 02:27:06 2013] Giving source the simple spatial ID 60 for pass 0, mean size = 10.66"
[Sun May 12 02:27:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src60.ximg exists
[Sun May 12 02:27:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src60.csv
[Sun May 12 02:27:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src60_1.ximg exists
[Sun May 12 02:27:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src60.csv
[Sun May 12 02:27:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:27:11 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Sun May 12 02:27:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src60.csv
[Sun May 12 02:27:11 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Sun May 12 02:27:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src60.csv
[Sun May 12 02:27:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:28:33 2013] Spatial fit model total counts = 281.656000, observed total counts = 193.000000
[Sun May 12 02:28:33 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 12 02:28:33 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:28:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:28:33 2013] Assessing source extent using major
[Sun May 12 02:28:33 2013] Source does appear to be extended
[Sun May 12 02:28:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:29:07 2013] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:29:07 2013] Initial guess for spatial extent in simple fitting = 10.66"
[Sun May 12 02:29:07 2013] source mask rpix=2.5, npix_max = 34, mask sum = 25, frac = 0.717
[Sun May 12 02:29:07 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 10.66"
[Sun May 12 02:29:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src47.ximg exists
[Sun May 12 02:29:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src47.csv
[Sun May 12 02:29:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src47_1.ximg exists
[Sun May 12 02:29:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src47.csv
[Sun May 12 02:29:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:29:11 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Sun May 12 02:29:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src47.csv
[Sun May 12 02:29:11 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Sun May 12 02:29:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src47.csv
[Sun May 12 02:29:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:30:16 2013] Source 31 is offset by -4.956417 and -2.581600 pixels which is larger than
2 X fitted extent = 3.089669 x 3.089669, not incorporating fit results
[Sun May 12 02:30:16 2013] Warning, spatial fit 47 centroid is now closest to src. 22
[Sun May 12 02:30:16 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:30:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:30:16 2013] Assessing source extent using major
[Sun May 12 02:30:16 2013] Source does appear to be extended
[Sun May 12 02:30:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 04:24:03 2013] XMMSAS src. selection expression = ellipse(27769.651764, 35910.462769, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 04:24:03 2013] Not overwriting source region fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src31_src.reg
[Sun May 12 04:24:03 2013] Extracting stamp from image fullrun_mos2_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (282, 376) - (357, 451)
[Sun May 12 04:24:03 2013] XMMSAS bgd. selection expression = annulus(27769.651764, 35910.462769, 1087.500000, 2175.000000, X, Y) && !ellipse(30499.427180, 36686.956000, 1786.152051, 1786.152051, 0.000000, X, Y) && !ellipse(30100.018768, 38406.084106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29548.922302, 35420.036377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28858.933289, 35708.505310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28225.379578, 36921.468719, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 04:24:03 2013] Writing fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src31.gif
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/events/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src31_src.evt and ../../xmm0150150201/products/events/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src31_bgd.evt exist, delete to re-create
[Sun May 12 04:24:04 2013] Mean detx,y = (-7072.99, 4495.31) 
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/images/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src31_src.img and ../../xmm0150150201/products/images/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src31_bgd.img exist, delete to re-create
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/spectra/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src31_src.pi and ../../xmm0150150201/products/spectra/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src31_bgd.pi exist, delete to re-create
[Sun May 12 04:24:04 2013] Setting source spectrum file to fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src31_src.pi.gz
[Sun May 12 04:24:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/lightcurves/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src31_src.lc and ../../xmm0150150201/products/lightcurves/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src31_bgd.lc exist, delete to re-create
[Sun May 12 04:24:22 2013] Not generating rmf since there are only 39 counts
[Sun May 12 04:24:22 2013] rmf not generated due to insufficient counts
[Sun May 12 04:26:05 2013] Updating aperture counts using extracted products
[Sun May 12 04:26:05 2013] Total counts from fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src31_src.pi.gz = 146.00
[Sun May 12 04:26:05 2013] Total counts from fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src31_bgd.pi.gz = 127.00
[Sun May 12 04:26:05 2013] Got source and background scale factors 877400.000000, 1850916.000000
[Sun May 12 04:26:05 2013] User source parameters:
  Position = (319.7, 413.3) = 8 24 2.05 -42 52 1.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 85.8 +/- 13.1
  Background aperture counts = 60.2
  Rate = 0.5 +/- 0.08

[Sun May 12 04:26:05 2013] Updating counts from extracted products
[Sun May 12 04:26:05 2013] Set source signif. to 85.80/7.76 = 11.06
[Sun May 12 04:26:05 2013] No arf file for this source, not re-computing flux
[Sun May 12 04:26:30 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 12 04:26:31 2013] xmm0150150201/analysis//spectral/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete