[Sun May 12 02:25:44 2013] Detection parameters:
  Position = (368.4, 416.8) = 8 23 42.78 -42 51 44.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.7 +/- 14.6
  Background counts = 34.9
  Rate = 0.2 +/- 0.03

[Sun May 12 02:25:47 2013] Off-axis axis estimate = 9.97'
[Sun May 12 02:27:06 2013] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:27:06 2013] Initial guess for spatial extent in simple fitting = 11.41"
[Sun May 12 02:27:06 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.076
[Sun May 12 02:27:06 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 11.41"
[Sun May 12 02:27:08 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src26.ximg exists
[Sun May 12 02:27:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src26.csv
[Sun May 12 02:27:08 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src26_1.ximg exists
[Sun May 12 02:27:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src26.csv
[Sun May 12 02:27:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:27:10 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sun May 12 02:27:10 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sun May 12 02:27:10 2013] Fit fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Sun May 12 02:28:33 2013] Spatial fit model total counts = 461.201000, observed total counts = 457.000000
[Sun May 12 02:28:33 2013] Offset between fit and detection position for source 24 = 1.168923 pixels
[Sun May 12 02:28:33 2013] 416.422000 total counts/ 361.523000 bgd. counts: snr = 2.887330
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 1.168923 pixels
  Position = (367.7, 415.9) = 8 23 43.06 -42 51 48.4
  Extent = 12.2 (4.1-22.8)", rotation angle = 0
  Source counts = 54.9 +/- 20.4
  Background counts = 361.5
  Rate = 0.3 +/- 0.1
[Sun May 12 02:28:33 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:28:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:28:33 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:28:33 2013] Source does appear to be extended
[Sun May 12 02:28:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:28:33 2013] Source is confused with source 26
[Sun May 12 02:29:07 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 02:29:07 2013] Initial guess for spatial extent in simple fitting = 12.22"
[Sun May 12 02:29:07 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.959
[Sun May 12 02:29:07 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 12.22"
[Sun May 12 02:29:08 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src23.ximg exists
[Sun May 12 02:29:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src23.csv
[Sun May 12 02:29:08 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun May 12 02:29:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src23.csv
[Sun May 12 02:29:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:29:10 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun May 12 02:29:10 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun May 12 02:29:10 2013] Fit fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sun May 12 02:30:16 2013] Warning, spatial fit 23 centroid is now closest to src. 26
[Sun May 12 02:30:16 2013] Source 24 is offset by 0.900055 and 1.400775 pixels which is larger than
2 X fitted extent = 1.333384 x 1.228455, not incorporating fit results
[Sun May 12 02:30:16 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:30:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:30:16 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:30:16 2013] Source does appear to be extended
[Sun May 12 02:30:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 04:24:02 2013] XMMSAS src. selection expression = ellipse(31944.382800, 36131.500000, 733.236021, 733.236021, 0.000000, X, Y)
[Sun May 12 04:24:02 2013] Not overwriting source region fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src24_src.reg
[Sun May 12 04:24:02 2013] Extracting stamp from image fullrun_mos2_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (326, 374) - (410, 458)
[Sun May 12 04:24:02 2013] XMMSAS bgd. selection expression = annulus(31944.382800, 36131.500000, 1222.060035, 2444.120070, X, Y) && !ellipse(32366.520000, 33302.160000, 1705.544049, 1705.544049, 0.000000, X, Y) && !ellipse(30499.427180, 36686.956000, 1786.152051, 1786.152051, 0.000000, X, Y) && !ellipse(33504.416809, 33718.298004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34817.411102, 35260.532837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30100.018768, 38406.084106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34233.073669, 34818.964294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32028.368000, 36455.598000, 1756.288051, 1756.288051, 0.000000, X, Y) && !ellipse(33068.986694, 33865.413177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32708.728424, 35913.736420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31385.491028, 36854.840759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29548.922302, 35420.036377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28858.933289, 35708.505310, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 04:24:02 2013] Writing fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src24.gif
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/events/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src24_src.evt and ../../xmm0150150201/products/events/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src24_bgd.evt exist, delete to re-create
[Sun May 12 04:24:04 2013] Mean detx,y = (-10127.25, 1938.89) 
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/images/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src24_src.img and ../../xmm0150150201/products/images/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src24_bgd.img exist, delete to re-create
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/spectra/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src24_src.pi and ../../xmm0150150201/products/spectra/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src24_bgd.pi exist, delete to re-create
[Sun May 12 04:24:04 2013] Setting source spectrum file to fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src24_src.pi.gz
[Sun May 12 04:24:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/lightcurves/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src24_src.lc and ../../xmm0150150201/products/lightcurves/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src24_bgd.lc exist, delete to re-create
[Sun May 12 04:24:18 2013] Not generating rmf since there are only 54 counts
[Sun May 12 04:24:18 2013] rmf not generated due to insufficient counts
[Sun May 12 04:25:56 2013] Updating aperture counts using extracted products
[Sun May 12 04:25:57 2013] Total counts from fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src24_src.pi.gz = 403.00
[Sun May 12 04:25:57 2013] Total counts from fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src24_bgd.pi.gz = 493.00
[Sun May 12 04:25:57 2013] Got source and background scale factors 1657468.000000, 2885256.000000
[Sun May 12 04:25:57 2013] User source parameters:
  Position = (367.7, 415.9) = 8 23 43.06 -42 51 48.4
  Extent = 12.2 (4.1-22.8)", rotation angle = 0
  Source aperture counts = 119.8 +/- 21.1
  Background aperture counts = 283.2
  Rate = 0.7 +/- 0.1

[Sun May 12 04:26:05 2013] No arf file for this source, not re-computing flux
[Sun May 12 04:26:30 2013] Flag b found in src. 24 procflags, skipping spectral fitting
[Sun May 12 04:26:30 2013] Flag c found in src. 24 procflags, skipping spectral fitting
[Sun May 12 04:26:30 2013] Source 24 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 12 04:26:31 2013] xmm0150150201/analysis//spectral/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete