[Sun May 12 02:25:42 2013] Detection parameters:
  Position = (302.2, 312.9) = 8 24 8.99 -42 59 17.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 436.0 +/- 29.9
  Background counts = 69.7
  Rate = 1 +/- 0.1

[Sun May 12 02:25:47 2013] Off-axis axis estimate = 1.08'
[Sun May 12 02:27:06 2013] Using EEF radius (= 6.97 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:27:06 2013] Initial guess for spatial extent in simple fitting = 6.97"
[Sun May 12 02:27:06 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.905
[Sun May 12 02:27:06 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 6.97"
[Sun May 12 02:27:07 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src3.ximg exists
[Sun May 12 02:27:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src3.csv
[Sun May 12 02:27:07 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun May 12 02:27:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src3.csv
[Sun May 12 02:27:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:27:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun May 12 02:27:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun May 12 02:27:09 2013] Fit fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun May 12 02:28:33 2013] Spatial fit model total counts = 1371.370000, observed total counts = 1267.000000
[Sun May 12 02:28:33 2013] Offset between fit and detection position for source 2 = 0.727783 pixels
[Sun May 12 02:28:33 2013] 1422.713100 total counts/ 1354.480000 bgd. counts: snr = 1.853996
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.727783 pixels
  Position = (302.5, 312.3) = 8 24 8.85 -42 59 19.2
  Extent = 6.6 (4.2-13.3)", rotation angle = 0
  Source counts = 68.2 +/- 37.7
  Background counts = 1354.5
  Rate = 0.4 +/- 0.2
[Sun May 12 02:28:33 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:28:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:28:33 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:28:33 2013] Source does appear to be extended
[Sun May 12 02:28:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:28:33 2013] Source is confused with source 3
[Sun May 12 02:29:07 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 02:29:07 2013] Initial guess for spatial extent in simple fitting = 6.63"
[Sun May 12 02:29:07 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.975
[Sun May 12 02:29:07 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 6.63"
[Sun May 12 02:29:08 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src3.ximg exists
[Sun May 12 02:29:08 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May 12 02:29:08 2013] Fit fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src3 appears to have run properly
[Sun May 12 02:29:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May 12 02:29:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May 12 02:29:09 2013] Fit fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun May 12 02:30:16 2013] Warning, spatial fit 3 centroid is now closest to src. 53
[Sun May 12 02:30:16 2013] Spatial fit model total counts = 666.318000, observed total counts = 667.000000
[Sun May 12 02:30:16 2013] Offset between fit and detection position for source 2 = 1.294668 pixels
[Sun May 12 02:30:16 2013] Warning, changing simple spatial fit ID from 3 to 17
[Sun May 12 02:30:16 2013] 651.212000 total counts/ 531.071000 bgd. counts: snr = 5.213327
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.294668 pixels
  Position = (303.1, 311.1) = 8 24 8.63 -42 59 24.3
  Extent = 12.3 (10.4-13.3)", rotation angle = 0
  Source counts = 120.1 +/- 25.5
  Background counts = 531.1
  Rate = 0.7 +/- 0.2
[Sun May 12 02:30:16 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:30:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:30:16 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:30:16 2013] Source does appear to be extended
[Sun May 12 02:30:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 04:24:01 2013] XMMSAS src. selection expression = ellipse(26321.638000, 27017.638000, 739.452021, 739.452021, 0.000000, X, Y)
[Sun May 12 04:24:01 2013] Not overwriting source region fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src2_src.reg
[Sun May 12 04:24:01 2013] Extracting stamp from image fullrun_mos2_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (261, 269) - (346, 354)
[Sun May 12 04:24:01 2013] XMMSAS bgd. selection expression = annulus(26321.638000, 27017.638000, 1232.420035, 2464.840071, X, Y) && !ellipse(25020.171600, 28748.627200, 1195.832034, 1195.832034, 0.000000, X, Y) && !ellipse(26146.518000, 27558.048000, 1099.096032, 1099.096032, 0.000000, X, Y) && !ellipse(25485.253000, 29973.646620, 989.720028, 989.720028, 0.000000, X, Y) && !ellipse(26082.088000, 29941.242000, 1327.432038, 1327.432038, 0.000000, X, Y) && !ellipse(25966.658539, 29270.701782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25556.464478, 27893.657562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26278.338200, 28254.302000, 1213.968035, 1213.968035, 0.000000, X, Y) && !ellipse(24979.737400, 26544.922800, 899.280026, 899.280026, 0.000000, X, Y) && !ellipse(24360.057831, 29769.130432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25597.338654, 26924.407257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23889.002533, 25332.775604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27489.163849, 27053.202728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25766.307373, 26398.552155, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 04:24:01 2013] Writing fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src2.gif
[Sun May 12 04:24:03 2013] ../../xmm0150150201/products/events/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0150150201/products/events/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun May 12 04:24:03 2013] Mean detx,y = (84.32, -1066.56) 
[Sun May 12 04:24:03 2013] ../../xmm0150150201/products/images/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src2_src.img and ../../xmm0150150201/products/images/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun May 12 04:24:03 2013] ../../xmm0150150201/products/spectra/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src2_src.pi and ../../xmm0150150201/products/spectra/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun May 12 04:24:03 2013] Setting source spectrum file to fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src2_src.pi.gz
[Sun May 12 04:24:03 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun May 12 04:24:03 2013] ../../xmm0150150201/products/lightcurves/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0150150201/products/lightcurves/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun May 12 04:25:51 2013] Updating aperture counts using extracted products
[Sun May 12 04:25:51 2013] Total counts from fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src2_src.pi.gz = 1118.00
[Sun May 12 04:25:51 2013] Total counts from fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src2_bgd.pi.gz = 1122.00
[Sun May 12 04:25:51 2013] Got source and background scale factors 1676736.000000, 6106755.000000
[Sun May 12 04:25:51 2013] User source parameters:
  Position = (303.1, 311.1) = 8 24 8.63 -42 59 24.3
  Extent = 12.3 (10.4-13.3)", rotation angle = 0
  Source aperture counts = 809.9 +/- 34.4
  Background aperture counts = 308.1
  Rate = 5 +/- 0.2

[Sun May 12 04:26:05 2013] No arf file for this source, not re-computing flux
[Sun May 12 04:26:30 2013] Flag c found in src. 2 procflags, skipping spectral fitting
[Sun May 12 04:26:30 2013] Source 2 has no response, skipping
[Sun May 12 04:26:31 2013] xmm0150150201/analysis//spectral/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete