[Sun May 12 02:25:43 2013] Detection parameters:
  Position = (374.9, 483.1) = 8 23 40.25 -42 46 55.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.6 +/- 10.6
  Background counts = 10.7
  Rate = 0.1 +/- 0.02

[Sun May 12 02:25:47 2013] Off-axis axis estimate = 14.49'
[Sun May 12 02:27:06 2013] Using EEF radius (= 13.67 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:27:06 2013] Initial guess for spatial extent in simple fitting = 13.67"
[Sun May 12 02:27:06 2013] source mask rpix=3.1, npix_max = 53, mask sum = 63, frac = 1.186
[Sun May 12 02:27:06 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 13.67"
[Sun May 12 02:27:08 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src43.ximg exists
[Sun May 12 02:27:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src43.csv
[Sun May 12 02:27:08 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src43_1.ximg exists
[Sun May 12 02:27:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src43.csv
[Sun May 12 02:27:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:27:10 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Sun May 12 02:27:10 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Sun May 12 02:27:10 2013] Fit fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Sun May 12 02:28:33 2013] Spatial fit model total counts = -60.454200, observed total counts = 222.000000
[Sun May 12 02:28:33 2013] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 12 02:28:33 2013] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 11.005615 pixels away
[Sun May 12 02:28:33 2013] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 11.235100 pixels away
[Sun May 12 02:28:33 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:28:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:28:33 2013] Assessing source extent using major
[Sun May 12 02:28:33 2013] Source does appear to be extended
[Sun May 12 02:28:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:29:07 2013] Using EEF radius (= 13.67 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:29:07 2013] Initial guess for spatial extent in simple fitting = 13.67"
[Sun May 12 02:29:07 2013] source mask rpix=3.1, npix_max = 53, mask sum = 63, frac = 1.186
[Sun May 12 02:29:07 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 13.67"
[Sun May 12 02:29:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src33.ximg exists
[Sun May 12 02:29:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src33.csv
[Sun May 12 02:29:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src33_1.ximg exists
[Sun May 12 02:29:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src33.csv
[Sun May 12 02:29:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:29:10 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Sun May 12 02:29:10 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Sun May 12 02:29:10 2013] Fit fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Sun May 12 02:30:16 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 11.975496 pixels away
[Sun May 12 02:30:16 2013] Spatial fit model total counts = 242.718000, observed total counts = 221.000000
[Sun May 12 02:30:16 2013] Offset between fit and detection position for source 15 = 0.876310 pixels
[Sun May 12 02:30:16 2013] Warning, changing simple spatial fit ID from 33 to 29
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.876310 pixels
  Position = (374.2, 483.6) = 8 23 40.53 -42 46 53.6
  Extent = 25.5 (20.6-27.9)", rotation angle = 0
  Source counts = 252.8 +/- 15.9
  Background counts = 0.0
  Rate = 2 +/- 0.1
[Sun May 12 02:30:16 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:30:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:30:16 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:30:16 2013] Source does appear to be extended
[Sun May 12 02:30:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:30:16 2013] Source is confused with source 65
[Sun May 12 02:30:16 2013] Source is confused with source 10
[Sun May 12 04:24:02 2013] XMMSAS src. selection expression = ellipse(32509.278000, 42025.854000, 1527.240044, 1527.240044, 0.000000, X, Y)
[Sun May 12 04:24:02 2013] Not overwriting source region fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src15_src.reg
[Sun May 12 04:24:02 2013] Extracting stamp from image fullrun_mos2_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (286, 396) - (462, 571)
[Sun May 12 04:24:03 2013] XMMSAS bgd. selection expression = annulus(32509.278000, 42025.854000, 2545.400073, 5090.800146, X, Y) && !ellipse(33523.440094, 42660.404816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34075.208282, 42079.487061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31944.382800, 36131.500000, 977.648028, 977.648028, 0.000000, X, Y) && !ellipse(30499.427180, 36686.956000, 1786.152051, 1786.152051, 0.000000, X, Y) && !ellipse(30100.018768, 38406.084106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33007.363464, 42504.012970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32028.368000, 36455.598000, 1756.288051, 1756.288051, 0.000000, X, Y) && !ellipse(31385.491028, 36854.840759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28225.379578, 36921.468719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34926.777069, 42042.303375, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 04:24:03 2013] Writing fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src15.gif
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/events/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src15_src.evt and ../../xmm0150150201/products/events/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src15_bgd.evt exist, delete to re-create
[Sun May 12 04:24:04 2013] Mean detx,y = (-14544.10, 5391.95) 
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/images/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src15_src.img and ../../xmm0150150201/products/images/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src15_bgd.img exist, delete to re-create
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/spectra/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src15_src.pi and ../../xmm0150150201/products/spectra/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src15_bgd.pi exist, delete to re-create
[Sun May 12 04:24:04 2013] Setting source spectrum file to fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src15_src.pi.gz
[Sun May 12 04:24:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/lightcurves/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src15_src.lc and ../../xmm0150150201/products/lightcurves/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src15_bgd.lc exist, delete to re-create
[Sun May 12 04:26:00 2013] Updating aperture counts using extracted products
[Sun May 12 04:26:00 2013] Total counts from fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src15_src.pi.gz = 579.00
[Sun May 12 04:26:00 2013] Total counts from fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src15_bgd.pi.gz = 2096.00
[Sun May 12 04:26:00 2013] Got source and background scale factors 5041564.000000, 26618240.000000
[Sun May 12 04:26:00 2013] User source parameters:
  Position = (374.2, 483.6) = 8 23 40.53 -42 46 53.6
  Extent = 25.5 (20.6-27.9)", rotation angle = 0
  Source aperture counts = 182.0 +/- 25.1
  Background aperture counts = 397.0
  Rate = 1 +/- 0.2

[Sun May 12 04:26:05 2013] No arf file for this source, not re-computing flux
[Sun May 12 04:26:30 2013] Flag p found in src. 15 procflags, skipping spectral fitting
[Sun May 12 04:26:30 2013] Flag c found in src. 15 procflags, skipping spectral fitting
[Sun May 12 04:26:30 2013] Source 15 has no response, skipping
[Sun May 12 04:26:31 2013] xmm0150150201/analysis//spectral/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete