[Sun May 12 02:25:43 2013] Detection parameters:
  Position = (402.0, 483.8) = 8 23 29.55 -42 46 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.9 +/- 16.8
  Background counts = 14.6
  Rate = 0.08 +/- 0.03

[Sun May 12 02:25:47 2013] Off-axis axis estimate = 15.39'
[Sun May 12 02:27:06 2013] Using EEF radius (= 14.13 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:27:06 2013] Initial guess for spatial extent in simple fitting = 14.13"
[Sun May 12 02:27:06 2013] source mask rpix=3.2, npix_max = 56, mask sum = 54, frac = 0.961
[Sun May 12 02:27:06 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 14.13"
[Sun May 12 02:27:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src59.ximg exists
[Sun May 12 02:27:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src59_1.ximg exists
[Sun May 12 02:27:09 2013] Fit fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src59 appears to have run properly
[Sun May 12 02:27:11 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Sun May 12 02:27:11 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src59.csv
[Sun May 12 02:27:11 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Sun May 12 02:27:11 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src59.csv
[Sun May 12 02:27:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:28:33 2013] Warning, spatial fit 59 centroid is now closest to src. 16
[Sun May 12 02:28:33 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:28:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:28:33 2013] Assessing source extent using major
[Sun May 12 02:28:33 2013] Source does appear to be extended
[Sun May 12 02:28:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:29:07 2013] Using EEF radius (= 14.13 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:29:07 2013] Initial guess for spatial extent in simple fitting = 14.13"
[Sun May 12 02:29:07 2013] source mask rpix=3.2, npix_max = 56, mask sum = 54, frac = 0.961
[Sun May 12 02:29:07 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 14.13"
[Sun May 12 02:29:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src46.ximg exists
[Sun May 12 02:29:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src46.csv
[Sun May 12 02:29:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src46_1.ximg exists
[Sun May 12 02:29:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src46.csv
[Sun May 12 02:29:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:29:11 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Sun May 12 02:29:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src46.csv
[Sun May 12 02:29:11 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Sun May 12 02:29:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src46.csv
[Sun May 12 02:29:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:30:16 2013] Source 12 is offset by 3.556541 and 5.260476 pixels which is larger than
2 X fitted extent = 1.619770 x 1.619770, not incorporating fit results
[Sun May 12 02:30:16 2013] Spatial fit model total counts = 319.365000, observed total counts = 253.000000
[Sun May 12 02:30:16 2013] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 12 02:30:16 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:30:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:30:16 2013] Assessing source extent using major
[Sun May 12 02:30:16 2013] Source does appear to be extended
[Sun May 12 02:30:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 04:24:03 2013] XMMSAS src. selection expression = ellipse(34926.777069, 42042.303375, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 04:24:03 2013] Not overwriting source region fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src12_src.reg
[Sun May 12 04:24:03 2013] Extracting stamp from image fullrun_mos2_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (365, 446) - (440, 521)
[Sun May 12 04:24:03 2013] XMMSAS bgd. selection expression = annulus(34926.777069, 42042.303375, 1087.500000, 2175.000000, X, Y) && !ellipse(33523.440094, 42660.404816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34075.208282, 42079.487061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33007.363464, 42504.012970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32509.278000, 42025.854000, 2036.320059, 2036.320059, 0.000000, X, Y)
[Sun May 12 04:24:03 2013] Writing fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src12.gif
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/events/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src12_src.evt and ../../xmm0150150201/products/events/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src12_bgd.evt exist, delete to re-create
[Sun May 12 04:24:04 2013] Mean detx,y = (-16123.66, 4294.27) 
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/images/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src12_src.img and ../../xmm0150150201/products/images/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src12_bgd.img exist, delete to re-create
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/spectra/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src12_src.pi and ../../xmm0150150201/products/spectra/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src12_bgd.pi exist, delete to re-create
[Sun May 12 04:24:04 2013] Setting source spectrum file to fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src12_src.pi.gz
[Sun May 12 04:24:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun May 12 04:24:04 2013] ../../xmm0150150201/products/lightcurves/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src12_src.lc and ../../xmm0150150201/products/lightcurves/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src12_bgd.lc exist, delete to re-create
[Sun May 12 04:24:22 2013] Not generating rmf since there are only 39 counts
[Sun May 12 04:24:22 2013] rmf not generated due to insufficient counts
[Sun May 12 04:26:05 2013] Updating aperture counts using extracted products
[Sun May 12 04:26:05 2013] Total counts from fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src12_src.pi.gz = 121.00
[Sun May 12 04:26:05 2013] Total counts from fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src12_bgd.pi.gz = 343.00
[Sun May 12 04:26:05 2013] Got source and background scale factors 892612.000000, 2653674.000000
[Sun May 12 04:26:05 2013] User source parameters:
  Position = (402.0, 483.8) = 8 23 29.55 -42 46 53.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 5.6 +/- 12.0
  Background aperture counts = 115.4
  Rate = 0.03 +/- 0.07

[Sun May 12 04:26:05 2013] Updating counts from extracted products
[Sun May 12 04:26:05 2013] Set source signif. to 5.63/10.74 = 0.52
[Sun May 12 04:26:05 2013] No arf file for this source, not re-computing flux
[Sun May 12 04:26:30 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 12 04:26:31 2013] xmm0150150201/analysis//spectral/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete