[Sun May 12 02:25:42 2013] Detection parameters:
  Position = (287.4, 328.1) = 8 24 14.83 -42 58 9.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 607.3 +/- 31.1
  Background counts = 19.8
  Rate = 2 +/- 0.1

[Sun May 12 02:25:47 2013] Off-axis axis estimate = 2.29'
[Sun May 12 02:27:06 2013] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:27:06 2013] Initial guess for spatial extent in simple fitting = 7.57"
[Sun May 12 02:27:06 2013] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.995
[Sun May 12 02:27:06 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.57"
[Sun May 12 02:27:07 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 12 02:27:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src1.csv
[Sun May 12 02:27:07 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 12 02:27:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src1.csv
[Sun May 12 02:27:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:27:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 12 02:27:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 12 02:27:09 2013] Fit fullrun_mos2_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 12 02:28:33 2013] Spatial fit model total counts = 1215.330000, observed total counts = 1154.000000
[Sun May 12 02:28:33 2013] Offset between fit and detection position for source 1 = 2.997076 pixels
[Sun May 12 02:28:33 2013] 1243.886000 total counts/ 873.097000 bgd. counts: snr = 12.548609
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.997076 pixels
  Position = (288.1, 331.0) = 8 24 14.56 -42 57 57.7
  Extent = 14.9 (14.5-15.1)", rotation angle = 0
  Source counts = 370.8 +/- 35.3
  Background counts = 873.1
  Rate = 2 +/- 0.2
[Sun May 12 02:28:33 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:28:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:28:33 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:28:33 2013] Source does appear to be extended
[Sun May 12 02:28:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:29:07 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 02:29:07 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 12 02:29:07 2013] Initial guess for spatial extent in simple fitting = 14.95"
[Sun May 12 02:29:07 2013] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.033
[Sun May 12 02:29:07 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 14.95"
[Sun May 12 02:29:08 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 12 02:29:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src1.csv
[Sun May 12 02:29:08 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 12 02:29:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src1.csv
[Sun May 12 02:29:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:29:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 12 02:29:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 12 02:29:09 2013] fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 12 02:29:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 12 02:29:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:30:16 2013] Warning, spatial fit 1 centroid is now closest to src. 48
[Sun May 12 02:30:16 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:30:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:30:16 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:30:16 2013] Source does appear to be extended
[Sun May 12 02:30:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 04:24:01 2013] XMMSAS src. selection expression = ellipse(25020.171600, 28748.627200, 896.874026, 896.874026, 0.000000, X, Y)
[Sun May 12 04:24:01 2013] Not overwriting source region fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src1_src.reg
[Sun May 12 04:24:01 2013] Extracting stamp from image fullrun_mos2_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (237, 279) - (340, 383)
[Sun May 12 04:24:01 2013] XMMSAS bgd. selection expression = annulus(25020.171600, 28748.627200, 1494.790043, 2989.580086, X, Y) && !ellipse(26146.518000, 27558.048000, 1099.096032, 1099.096032, 0.000000, X, Y) && !ellipse(26321.638000, 27017.638000, 985.936028, 985.936028, 0.000000, X, Y) && !ellipse(25485.253000, 29973.646620, 989.720028, 989.720028, 0.000000, X, Y) && !ellipse(26082.088000, 29941.242000, 1327.432038, 1327.432038, 0.000000, X, Y) && !ellipse(25966.658539, 29270.701782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25989.162567, 31785.431366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25418.682800, 31138.943000, 1041.608030, 1041.608030, 0.000000, X, Y) && !ellipse(25556.464478, 27893.657562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26278.338200, 28254.302000, 1213.968035, 1213.968035, 0.000000, X, Y) && !ellipse(24979.737400, 26544.922800, 899.280026, 899.280026, 0.000000, X, Y) && !ellipse(24360.057831, 29769.130432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25597.338654, 26924.407257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23889.002533, 25332.775604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27489.163849, 27053.202728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25766.307373, 26398.552155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24382.081299, 30799.897766, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 04:24:01 2013] Writing fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src1.gif
[Sun May 12 04:24:03 2013] ../../xmm0150150201/products/events/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0150150201/products/events/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun May 12 04:24:03 2013] Mean detx,y = (-49.72, 941.70) 
[Sun May 12 04:24:03 2013] ../../xmm0150150201/products/images/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src1_src.img and ../../xmm0150150201/products/images/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun May 12 04:24:03 2013] ../../xmm0150150201/products/spectra/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src1_src.pi and ../../xmm0150150201/products/spectra/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun May 12 04:24:03 2013] Setting source spectrum file to fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src1_src.pi.gz
[Sun May 12 04:24:03 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun May 12 04:24:03 2013] ../../xmm0150150201/products/lightcurves/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0150150201/products/lightcurves/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun May 12 04:25:50 2013] Updating aperture counts using extracted products
[Sun May 12 04:25:50 2013] Total counts from fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src1_src.pi.gz = 1448.00
[Sun May 12 04:25:50 2013] Total counts from fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 684.00
[Sun May 12 04:25:50 2013] Got source and background scale factors 2299660.000000, 6598521.000000
[Sun May 12 04:25:50 2013] User source parameters:
  Position = (288.1, 331.0) = 8 24 14.56 -42 57 57.7
  Extent = 14.9 (14.5-15.1)", rotation angle = 0
  Source aperture counts = 1209.6 +/- 39.1
  Background aperture counts = 238.4
  Rate = 7 +/- 0.2

[Sun May 12 04:26:05 2013] No arf file for this source, not re-computing flux
[Sun May 12 04:26:30 2013] Source 1 has no response, skipping
[Sun May 12 04:26:31 2013] xmm0150150201/analysis//spectral/fullrun_mos2_xmm0150150201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete