[Sun May 12 02:25:39 2013] Detection parameters:
  Position = (288.5, 293.2) = 8 24 14.41 -43 0 38.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.8 +/- 19.9
  Background counts = 128.0
  Rate = 0.09 +/- 0.02

[Sun May 12 02:25:42 2013] Off-axis axis estimate = 0.81'
[Sun May 12 02:26:58 2013] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:26:58 2013] Initial guess for spatial extent in simple fitting = 6.83"
[Sun May 12 02:26:58 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.166
[Sun May 12 02:26:58 2013] Giving source the simple spatial ID 57 for pass 0, mean size = 6.83"
[Sun May 12 02:27:01 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src57.ximg exists
[Sun May 12 02:27:01 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src57_1.ximg exists
[Sun May 12 02:27:01 2013] Fit fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src57 appears to have run properly
[Sun May 12 02:27:04 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Sun May 12 02:27:04 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Sun May 12 02:27:04 2013] Fit fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly
[Sun May 12 02:28:12 2013] Source 73 is offset by -1.329452 and -2.618972 pixels which is larger than
2 X fitted extent = 0.857710 x 0.857710, not incorporating fit results
[Sun May 12 02:28:12 2013] Source 73 is offset by -0.217939 and -6.794742 pixels which is larger than
2 X fitted extent = 6.284138 x 6.284138, not incorporating fit results
[Sun May 12 02:28:12 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:28:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:28:12 2013] Assessing source extent using major
[Sun May 12 02:28:12 2013] Source does appear to be extended
[Sun May 12 02:28:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:28:12 2013] Source is confused with source 75
[Sun May 12 02:29:01 2013] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:29:01 2013] Initial guess for spatial extent in simple fitting = 6.83"
[Sun May 12 02:29:01 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.166
[Sun May 12 02:29:01 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 6.83"
[Sun May 12 02:29:03 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src53.ximg exists
[Sun May 12 02:29:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src53.csv
[Sun May 12 02:29:03 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src53_1.ximg exists
[Sun May 12 02:29:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src53.csv
[Sun May 12 02:29:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:29:05 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Sun May 12 02:29:05 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Sun May 12 02:29:05 2013] Fit fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Sun May 12 02:30:03 2013] Source 73 is offset by -4.952785 and -6.242305 pixels which is larger than
2 X fitted extent = 1.310625 x 1.310625, not incorporating fit results
[Sun May 12 02:30:03 2013] Source 73 is offset by -0.159070 and -6.832075 pixels which is larger than
2 X fitted extent = 6.284138 x 6.284138, not incorporating fit results
[Sun May 12 02:30:03 2013] Warning: source 70 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 73 at 90.511552 pixels away
[Sun May 12 02:30:04 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:30:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:30:04 2013] Assessing source extent using major
[Sun May 12 02:30:04 2013] Source does appear to be extended
[Sun May 12 02:30:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:31:56 2013] XMMSAS src. selection expression = ellipse(25053.803711, 25463.615448, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 02:31:56 2013] Not overwriting source region fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src73_src.reg
[Sun May 12 02:31:56 2013] Extracting stamp from image fullrun_mos1_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (251, 256) - (326, 331)
[Sun May 12 02:31:56 2013] XMMSAS bgd. selection expression = annulus(25053.803711, 25463.615448, 1087.500000, 2175.000000, X, Y) && !ellipse(24754.786000, 28232.498000, 1756.576051, 510.780815, 126.522000, X, Y) && !ellipse(26236.857600, 27935.482340, 1658.152048, 1658.152048, 0.000000, X, Y) && !ellipse(26428.793000, 26979.350400, 1083.024031, 1083.024031, 0.000000, X, Y) && !ellipse(25064.263600, 28846.106000, 1291.744037, 1291.744037, 0.000000, X, Y) && !ellipse(24937.573000, 26358.556000, 1060.024031, 1060.024031, 0.000000, X, Y) && !ellipse(23919.997345, 27338.687408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27246.028000, 26860.354000, 1175.096034, 1175.096034, 0.000000, X, Y) && !ellipse(24612.349335, 25022.920410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23495.032000, 27016.052000, 1190.000034, 1190.000034, 0.000000, X, Y) && !ellipse(23175.880249, 26445.283325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24037.771790, 25463.636688, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 02:31:56 2013] Writing fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src73.gif
[Sun May 12 02:46:03 2013] Mean detx,y = (-1100.90, -2290.44) 
[Sun May 12 02:46:04 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 02:46:19 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 02:46:19 2013] Setting source spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Sun May 12 02:46:19 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Sun May 12 03:54:01 2013] Not generating rmf since there are only 83 counts
[Sun May 12 03:54:01 2013] rmf not generated due to insufficient counts
[Sun May 12 04:25:44 2013] Updating aperture counts using extracted products
[Sun May 12 04:25:44 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src73_src_b10.pi.gz = 855.00
[Sun May 12 04:25:44 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src73_bgd.pi.gz = 886.00
[Sun May 12 04:25:44 2013] Got source and background scale factors 1329600.000000, 2968814.000000
[Sun May 12 04:25:44 2013] User source parameters:
  Position = (288.5, 293.2) = 8 24 14.41 -43 0 38.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 458.2 +/- 30.3
  Background aperture counts = 396.8
  Rate = 0.7 +/- 0.05

[Sun May 12 04:25:44 2013] Updating counts from extracted products
[Sun May 12 04:25:44 2013] Set source signif. to 458.20/19.92 = 23.00
[Sun May 12 04:25:50 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 04:25:50 2013] Using photon index=1.80, rate=0.735, arf fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src73.arf
[Sun May 12 04:25:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 04:25:50 2013] Updating source flux to 1.2e-11
[Sun May 12 04:26:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 12 04:26:30 2013] xmm0150150201/analysis//spectral/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src73_pl.csv not found, spectral fit skipped or did not complete