[Sun May 12 02:25:39 2013] Detection parameters:
  Position = (286.9, 304.1) = 8 24 15.06 -42 59 55.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 377.5 +/- 31.5
  Background counts = 147.0
  Rate = 0.4 +/- 0.03

[Sun May 12 02:25:42 2013] Off-axis axis estimate = 0.93'
[Sun May 12 02:26:58 2013] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:26:58 2013] Initial guess for spatial extent in simple fitting = 6.90"
[Sun May 12 02:26:58 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.920
[Sun May 12 02:26:58 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 6.90"
[Sun May 12 02:27:00 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src13.ximg exists
[Sun May 12 02:27:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src13.csv
[Sun May 12 02:27:00 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun May 12 02:27:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src13.csv
[Sun May 12 02:27:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:27:03 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun May 12 02:27:03 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun May 12 02:27:03 2013] Fit fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sun May 12 02:28:12 2013] Spatial fit model total counts = 1708.700000, observed total counts = 1704.000000
[Sun May 12 02:28:12 2013] Offset between fit and detection position for source 72 = 2.342013 pixels
[Sun May 12 02:28:12 2013] 1720.501000 total counts/ 1356.970000 bgd. counts: snr = 9.868618
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 2.342013 pixels
  Position = (287.4, 306.4) = 8 24 14.86 -42 59 44.9
  Extent = 13.8 (13.8-27.6)", rotation angle = 0
  Source counts = 363.5 +/- 41.5
  Background counts = 1357.0
  Rate = 0.6 +/- 0.07
[Sun May 12 02:28:12 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:28:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:28:12 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:28:12 2013] Source does appear to be extended
[Sun May 12 02:28:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:29:01 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 02:29:01 2013] Initial guess for spatial extent in simple fitting = 13.79"
[Sun May 12 02:29:01 2013] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.909
[Sun May 12 02:29:01 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 13.79"
[Sun May 12 02:29:02 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src12.ximg exists
[Sun May 12 02:29:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src12.csv
[Sun May 12 02:29:02 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src12_1.ximg exists
[Sun May 12 02:29:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src12.csv
[Sun May 12 02:29:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:29:04 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sun May 12 02:29:04 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sun May 12 02:29:04 2013] Fit fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sun May 12 02:30:03 2013] Spatial fit model total counts = 2437.340000, observed total counts = 2431.000000
[Sun May 12 02:30:03 2013] Offset between fit and detection position for source 72 = 2.848346 pixels
[Sun May 12 02:30:03 2013] 2444.750000 total counts/ 2136.510000 bgd. counts: snr = 6.668629
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 2.848346 pixels
  Position = (287.2, 303.5) = 8 24 14.94 -42 59 57.2
  Extent = 13.3 (10.1-18.8)", rotation angle = 0
  Source counts = 308.2 +/- 49.4
  Background counts = 2136.5
  Rate = 0.5 +/- 0.08
[Sun May 12 02:30:03 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:30:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:30:03 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:30:03 2013] Source does appear to be extended
[Sun May 12 02:30:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:31:53 2013] XMMSAS src. selection expression = ellipse(24937.573000, 26358.556000, 795.018023, 795.018023, 0.000000, X, Y)
[Sun May 12 02:31:53 2013] Not overwriting source region fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src72_src.reg
[Sun May 12 02:31:53 2013] Extracting stamp from image fullrun_mos1_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (242, 258) - (333, 349)
[Sun May 12 02:31:53 2013] XMMSAS bgd. selection expression = annulus(24937.573000, 26358.556000, 1325.030038, 2650.060076, X, Y) && !ellipse(24754.786000, 28232.498000, 1756.576051, 510.780815, 126.522000, X, Y) && !ellipse(26236.857600, 27935.482340, 1658.152048, 1658.152048, 0.000000, X, Y) && !ellipse(24986.203400, 28749.034800, 1106.928032, 1106.928032, 0.000000, X, Y) && !ellipse(25876.385306, 29895.594000, 952.592027, 417.880812, 320.648000, X, Y) && !ellipse(26428.793000, 26979.350400, 1083.024031, 1083.024031, 0.000000, X, Y) && !ellipse(25064.263600, 28846.106000, 1291.744037, 1291.744037, 0.000000, X, Y) && !ellipse(26179.602000, 29159.374000, 1023.408029, 1023.408029, 0.000000, X, Y) && !ellipse(26446.874000, 30074.768000, 1349.464039, 1349.464039, 0.000000, X, Y) && !ellipse(23919.997345, 27338.687408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27246.028000, 26860.354000, 1175.096034, 1175.096034, 0.000000, X, Y) && !ellipse(24612.349335, 25022.920410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23495.032000, 27016.052000, 1190.000034, 1190.000034, 0.000000, X, Y) && !ellipse(23175.880249, 26445.283325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25053.803711, 25463.615448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24037.771790, 25463.636688, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 02:31:53 2013] Writing fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src72.gif
[Sun May 12 02:32:02 2013] ../../xmm0150150201/products/events/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src72_src.evt and ../../xmm0150150201/products/events/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src72_bgd.evt exist, delete to re-create
[Sun May 12 02:32:02 2013] Mean detx,y = (-401.63, -1720.02) 
[Sun May 12 02:32:02 2013] ../../xmm0150150201/products/images/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src72_src.img and ../../xmm0150150201/products/images/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src72_bgd.img exist, delete to re-create
[Sun May 12 02:32:02 2013] ../../xmm0150150201/products/spectra/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src72_src.pi and ../../xmm0150150201/products/spectra/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src72_bgd.pi exist, delete to re-create
[Sun May 12 02:32:02 2013] Setting source spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src72_src.pi.gz
[Sun May 12 02:32:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src72_bgd.pi.gz
[Sun May 12 02:32:02 2013] ../../xmm0150150201/products/lightcurves/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src72_src.lc and ../../xmm0150150201/products/lightcurves/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src72_bgd.lc exist, delete to re-create
[Sun May 12 04:25:34 2013] Updating aperture counts using extracted products
[Sun May 12 04:25:34 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src72_src.pi.gz = 1741.00
[Sun May 12 04:25:34 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src72_bgd.pi.gz = 942.00
[Sun May 12 04:25:34 2013] Got source and background scale factors 1987200.000000, 2994857.000000
[Sun May 12 04:25:34 2013] User source parameters:
  Position = (287.2, 303.5) = 8 24 14.94 -42 59 57.2
  Extent = 13.3 (10.1-18.8)", rotation angle = 0
  Source aperture counts = 1115.9 +/- 42.7
  Background aperture counts = 625.1
  Rate = 2 +/- 0.07

[Sun May 12 04:25:48 2013] No arf file for this source, not re-computing flux
[Sun May 12 04:26:12 2013] Source 72 has no response, skipping
[Sun May 12 04:26:30 2013] xmm0150150201/analysis//spectral/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src72_pl.csv not found, spectral fit skipped or did not complete