[Sun May 12 02:25:39 2013] Detection parameters:
  Position = (266.9, 304.5) = 8 24 22.96 -42 59 54.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.5 +/- 14.3
  Background counts = 55.0
  Rate = 0.1 +/- 0.02

[Sun May 12 02:25:42 2013] Off-axis axis estimate = 2.33'
[Sun May 12 02:26:58 2013] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:26:58 2013] Initial guess for spatial extent in simple fitting = 7.59"
[Sun May 12 02:26:58 2013] source mask rpix=1.7, npix_max = 20, mask sum = 17, frac = 0.843
[Sun May 12 02:26:58 2013] Giving source the simple spatial ID 56 for pass 0, mean size = 7.59"
[Sun May 12 02:27:01 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src56.ximg exists
[Sun May 12 02:27:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src56.csv
[Sun May 12 02:27:01 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src56_1.ximg exists
[Sun May 12 02:27:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src56.csv
[Sun May 12 02:27:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:27:04 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Sun May 12 02:27:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src56.csv
[Sun May 12 02:27:04 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Sun May 12 02:27:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src56.csv
[Sun May 12 02:27:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:28:12 2013] Source 71 is offset by 6.927336 and 6.506682 pixels which is larger than
2 X fitted extent = 0.872556 x 0.872556, not incorporating fit results
[Sun May 12 02:28:12 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:28:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:28:12 2013] Assessing source extent using major
[Sun May 12 02:28:12 2013] Source does appear to be extended
[Sun May 12 02:28:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:28:12 2013] Source is confused with source 70
[Sun May 12 02:29:01 2013] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:29:01 2013] Initial guess for spatial extent in simple fitting = 7.59"
[Sun May 12 02:29:01 2013] source mask rpix=1.7, npix_max = 20, mask sum = 17, frac = 0.843
[Sun May 12 02:29:01 2013] Giving source the simple spatial ID 52 for pass 1, mean size = 7.59"
[Sun May 12 02:29:03 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src52.ximg exists
[Sun May 12 02:29:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src52.csv
[Sun May 12 02:29:03 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src52_1.ximg exists
[Sun May 12 02:29:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src52.csv
[Sun May 12 02:29:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:29:05 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Sun May 12 02:29:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src52.csv
[Sun May 12 02:29:05 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Sun May 12 02:29:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src52.csv
[Sun May 12 02:29:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:30:03 2013] Source 71 is offset by 7.299727 and -2.327962 pixels which is larger than
2 X fitted extent = 1.622382 x 1.622382, not incorporating fit results
[Sun May 12 02:30:03 2013] Warning, spatial fit 52 centroid is now closest to src. 68
[Sun May 12 02:30:04 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:30:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:30:04 2013] Assessing source extent using major
[Sun May 12 02:30:04 2013] Source does appear to be extended
[Sun May 12 02:30:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:31:56 2013] XMMSAS src. selection expression = ellipse(23175.880249, 26445.283325, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 02:31:56 2013] Not overwriting source region fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src71_src.reg
[Sun May 12 02:31:56 2013] Extracting stamp from image fullrun_mos1_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (229, 267) - (304, 342)
[Sun May 12 02:31:56 2013] XMMSAS bgd. selection expression = annulus(23175.880249, 26445.283325, 1087.500000, 2175.000000, X, Y) && !ellipse(24754.786000, 28232.498000, 1756.576051, 510.780815, 126.522000, X, Y) && !ellipse(26236.857600, 27935.482340, 1658.152048, 1658.152048, 0.000000, X, Y) && !ellipse(24986.203400, 28749.034800, 1106.928032, 1106.928032, 0.000000, X, Y) && !ellipse(26428.793000, 26979.350400, 1083.024031, 1083.024031, 0.000000, X, Y) && !ellipse(25064.263600, 28846.106000, 1291.744037, 1291.744037, 0.000000, X, Y) && !ellipse(26179.602000, 29159.374000, 1023.408029, 1023.408029, 0.000000, X, Y) && !ellipse(24937.573000, 26358.556000, 1060.024031, 1060.024031, 0.000000, X, Y) && !ellipse(23919.997345, 27338.687408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24612.349335, 25022.920410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23495.032000, 27016.052000, 1190.000034, 1190.000034, 0.000000, X, Y) && !ellipse(25053.803711, 25463.615448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24037.771790, 25463.636688, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 02:31:56 2013] Writing fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src71.gif
[Sun May 12 02:45:43 2013] Mean detx,y = (759.27, -2819.81) 
[Sun May 12 02:45:44 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 02:46:01 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 02:46:01 2013] Setting source spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Sun May 12 02:46:01 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Sun May 12 03:51:44 2013] Not generating rmf since there are only 80 counts
[Sun May 12 03:51:44 2013] rmf not generated due to insufficient counts
[Sun May 12 04:25:44 2013] Updating aperture counts using extracted products
[Sun May 12 04:25:44 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src71_src_b10.pi.gz = 294.00
[Sun May 12 04:25:44 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src71_bgd.pi.gz = 70.00
[Sun May 12 04:25:44 2013] Got source and background scale factors 948782.000000, 1399043.000000
[Sun May 12 04:25:44 2013] User source parameters:
  Position = (266.9, 304.5) = 8 24 22.96 -42 59 54.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 246.5 +/- 18.2
  Background aperture counts = 47.5
  Rate = 0.4 +/- 0.03

[Sun May 12 04:25:44 2013] Updating counts from extracted products
[Sun May 12 04:25:44 2013] Set source signif. to 246.53/6.89 = 35.78
[Sun May 12 04:25:50 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 04:25:50 2013] Using photon index=1.80, rate=0.395, arf fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src71.arf
[Sun May 12 04:25:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 04:25:50 2013] Updating source flux to 6.9e-12
[Sun May 12 04:26:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 12 04:26:30 2013] xmm0150150201/analysis//spectral/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src71_pl.csv not found, spectral fit skipped or did not complete