[Sun May 12 02:25:39 2013] Detection parameters:
  Position = (271.6, 308.1) = 8 24 21.12 -42 59 39.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.9 +/- 18.8
  Background counts = 67.1
  Rate = 0.1 +/- 0.02

[Sun May 12 02:25:42 2013] Off-axis axis estimate = 2.07'
[Sun May 12 02:26:58 2013] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:26:58 2013] Initial guess for spatial extent in simple fitting = 7.46"
[Sun May 12 02:26:58 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.019
[Sun May 12 02:26:58 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 7.46"
[Sun May 12 02:27:01 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src46.ximg exists
[Sun May 12 02:27:01 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src46_1.ximg exists
[Sun May 12 02:27:01 2013] Fit fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src46 appears to have run properly
[Sun May 12 02:27:04 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Sun May 12 02:27:04 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Sun May 12 02:27:04 2013] Fit fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Sun May 12 02:28:12 2013] Spatial fit model total counts = 695.683000, observed total counts = 653.000000
[Sun May 12 02:28:12 2013] Offset between fit and detection position for source 70 = 3.625694 pixels
[Sun May 12 02:28:12 2013] 696.593000 total counts/ 513.727000 bgd. counts: snr = 8.068016
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 3.625694 pixels
  Position = (273.2, 311.3) = 8 24 20.48 -42 59 23.4
  Extent = 14.9 (14.9-29.8)" x 12.7 (8.7-14.9)", rotation angle = 108 (90-90) degrees
  Source counts = 182.9 +/- 26.4
  Background counts = 513.7
  Rate = 0.3 +/- 0.04
[Sun May 12 02:28:12 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:28:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:28:12 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:28:12 2013] Source does appear to be extended
[Sun May 12 02:28:12 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Sun May 12 02:28:12 2013] Source is confused with source 68
[Sun May 12 02:28:12 2013] Source is confused with source 71
[Sun May 12 02:29:01 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 02:29:01 2013] Initial guess for spatial extent in simple fitting = 13.82"
[Sun May 12 02:29:01 2013] source mask rpix=3.2, npix_max = 54, mask sum = 41, frac = 0.758
[Sun May 12 02:29:01 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 13.82"
[Sun May 12 02:29:02 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src43.ximg exists
[Sun May 12 02:29:02 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src43.csv
[Sun May 12 02:29:02 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src43_1.ximg exists
[Sun May 12 02:29:02 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src43.csv
[Sun May 12 02:29:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:29:05 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Sun May 12 02:29:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src43.csv
[Sun May 12 02:29:05 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Sun May 12 02:29:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src43.csv
[Sun May 12 02:29:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:30:03 2013] Spatial fit model total counts = 836.346000, observed total counts = 827.000000
[Sun May 12 02:30:03 2013] Offset between fit and detection position for source 70 = 2.617328 pixels
[Sun May 12 02:30:03 2013] Warning, changing simple spatial fit ID from 43 to 27
[Sun May 12 02:30:03 2013] 800.572000 total counts/ 639.891000 bgd. counts: snr = 6.352015
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 2.617328 pixels
  Position = (270.6, 311.1) = 8 24 21.51 -42 59 24.3
  Extent = 14.9 (14.8-14.9)", rotation angle = 0
  Source counts = 160.7 +/- 28.3
  Background counts = 639.9
  Rate = 0.3 +/- 0.05
[Sun May 12 02:30:04 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:30:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:30:04 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:30:04 2013] Source does appear to be extended
[Sun May 12 02:30:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:31:56 2013] XMMSAS src. selection expression = ellipse(23495.032000, 27016.052000, 892.500026, 892.500026, 0.000000, X, Y)
[Sun May 12 02:31:56 2013] Not overwriting source region fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src70_src.reg
[Sun May 12 02:31:56 2013] Extracting stamp from image fullrun_mos1_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (219, 260) - (322, 362)
[Sun May 12 02:31:56 2013] XMMSAS bgd. selection expression = annulus(23495.032000, 27016.052000, 1487.500043, 2975.000086, X, Y) && !ellipse(24754.786000, 28232.498000, 1756.576051, 510.780815, 126.522000, X, Y) && !ellipse(26236.857600, 27935.482340, 1658.152048, 1658.152048, 0.000000, X, Y) && !ellipse(24986.203400, 28749.034800, 1106.928032, 1106.928032, 0.000000, X, Y) && !ellipse(25876.385306, 29895.594000, 952.592027, 417.880812, 320.648000, X, Y) && !ellipse(26428.793000, 26979.350400, 1083.024031, 1083.024031, 0.000000, X, Y) && !ellipse(25064.263600, 28846.106000, 1291.744037, 1291.744037, 0.000000, X, Y) && !ellipse(25765.042400, 31015.129200, 1351.456039, 760.260822, 305.316000, X, Y) && !ellipse(26179.602000, 29159.374000, 1023.408029, 1023.408029, 0.000000, X, Y) && !ellipse(25038.810760, 30489.684143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26446.874000, 30074.768000, 1349.464039, 1349.464039, 0.000000, X, Y) && !ellipse(24937.573000, 26358.556000, 1060.024031, 1060.024031, 0.000000, X, Y) && !ellipse(23919.997345, 27338.687408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27246.028000, 26860.354000, 1175.096034, 1175.096034, 0.000000, X, Y) && !ellipse(24612.349335, 25022.920410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24043.379211, 30230.948883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23175.880249, 26445.283325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25053.803711, 25463.615448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24037.771790, 25463.636688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24412.927429, 30685.954529, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 02:31:56 2013] Writing fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src70.gif
[Sun May 12 02:41:33 2013] Mean detx,y = (846.46, -2334.63) 
[Sun May 12 02:41:35 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 02:41:57 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 02:41:57 2013] Setting source spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Sun May 12 02:41:57 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Sun May 12 04:25:41 2013] Updating aperture counts using extracted products
[Sun May 12 04:25:41 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src70_src_b10.pi.gz = 766.00
[Sun May 12 04:25:41 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src70_bgd.pi.gz = 203.00
[Sun May 12 04:25:41 2013] Got source and background scale factors 2297708.000000, 2707979.000000
[Sun May 12 04:25:41 2013] User source parameters:
  Position = (270.6, 311.1) = 8 24 21.51 -42 59 24.3
  Extent = 14.9 (14.8-14.9)", rotation angle = 0
  Source aperture counts = 593.8 +/- 28.7
  Background aperture counts = 172.2
  Rate = 1 +/- 0.05

[Sun May 12 04:25:49 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 04:25:49 2013] Using photon index=1.80, rate=0.258, arf fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src70.arf
[Sun May 12 04:25:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 04:25:49 2013] Updating source flux to 4.1e-12
[Sun May 12 04:26:12 2013] Flag c found in src. 70 procflags, skipping spectral fitting
[Sun May 12 04:26:30 2013] xmm0150150201/analysis//spectral/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src70_pl.csv not found, spectral fit skipped or did not complete