[Sun May 12 02:25:38 2013] Detection parameters:
  Position = (288.4, 351.0) = 8 24 14.47 -42 56 29.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 478.9 +/- 33.4
  Background counts = 104.9
  Rate = 0.5 +/- 0.03

[Sun May 12 02:25:42 2013] Off-axis axis estimate = 3.88'
[Sun May 12 02:26:58 2013] Using EEF radius (= 8.37 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:26:58 2013] Initial guess for spatial extent in simple fitting = 8.37"
[Sun May 12 02:26:58 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.851
[Sun May 12 02:26:58 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 8.37"
[Sun May 12 02:27:00 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src11.ximg exists
[Sun May 12 02:27:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src11.csv
[Sun May 12 02:27:00 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun May 12 02:27:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src11.csv
[Sun May 12 02:27:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:27:03 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun May 12 02:27:03 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun May 12 02:27:03 2013] Fit fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun May 12 02:28:12 2013] Warning, spatial fit 11 centroid is now closest to src. 9
[Sun May 12 02:28:12 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:28:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:28:12 2013] Assessing source extent using major
[Sun May 12 02:28:12 2013] Source does appear to be extended
[Sun May 12 02:28:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:28:12 2013] Source is confused with source 7
[Sun May 12 02:29:01 2013] Using EEF radius (= 8.37 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:29:01 2013] Initial guess for spatial extent in simple fitting = 8.37"
[Sun May 12 02:29:01 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.851
[Sun May 12 02:29:01 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 8.37"
[Sun May 12 02:29:02 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src10.ximg exists
[Sun May 12 02:29:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src10.csv
[Sun May 12 02:29:02 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun May 12 02:29:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src10.csv
[Sun May 12 02:29:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:29:03 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun May 12 02:29:03 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun May 12 02:29:03 2013] Fit fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sun May 12 02:30:03 2013] Source 64 is offset by 4.262032 and 2.928553 pixels which is larger than
2 X fitted extent = 2.005504 x 2.005504, not incorporating fit results
[Sun May 12 02:30:03 2013] Source 64 is offset by 2.902698 and 6.680576 pixels which is larger than
2 X fitted extent = 2.809324 x 2.809324, not incorporating fit results
[Sun May 12 02:30:03 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 64 at 33.205244 pixels away
[Sun May 12 02:30:03 2013] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 64 at 12.971202 pixels away
[Sun May 12 02:30:03 2013] Source 64 is offset by -2.903164 and 7.276668 pixels which is larger than
2 X fitted extent = 1.282883 x 1.282883, not incorporating fit results
[Sun May 12 02:30:03 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:30:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:30:03 2013] Assessing source extent using major
[Sun May 12 02:30:03 2013] Source does appear to be extended
[Sun May 12 02:30:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:31:53 2013] XMMSAS src. selection expression = ellipse(25038.810760, 30489.684143, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 02:31:53 2013] Not overwriting source region fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src64_src.reg
[Sun May 12 02:31:53 2013] Extracting stamp from image fullrun_mos1_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (251, 314) - (326, 389)
[Sun May 12 02:31:53 2013] XMMSAS bgd. selection expression = annulus(25038.810760, 30489.684143, 1087.500000, 2175.000000, X, Y) && !ellipse(24754.786000, 28232.498000, 1756.576051, 510.780815, 126.522000, X, Y) && !ellipse(26236.857600, 27935.482340, 1658.152048, 1658.152048, 0.000000, X, Y) && !ellipse(24986.203400, 28749.034800, 1106.928032, 1106.928032, 0.000000, X, Y) && !ellipse(25876.385306, 29895.594000, 952.592027, 417.880812, 320.648000, X, Y) && !ellipse(26119.866000, 31549.855800, 1385.728040, 1385.728040, 0.000000, X, Y) && !ellipse(25064.263600, 28846.106000, 1291.744037, 1291.744037, 0.000000, X, Y) && !ellipse(25765.042400, 31015.129200, 1351.456039, 760.260822, 305.316000, X, Y) && !ellipse(26179.602000, 29159.374000, 1023.408029, 1023.408029, 0.000000, X, Y) && !ellipse(26446.874000, 30074.768000, 1349.464039, 1349.464039, 0.000000, X, Y) && !ellipse(24043.379211, 30230.948883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24412.927429, 30685.954529, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 02:31:53 2013] Writing fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src64.gif
[Sun May 12 02:32:02 2013] ../../xmm0150150201/products/events/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src64_src.evt and ../../xmm0150150201/products/events/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src64_bgd.evt exist, delete to re-create
[Sun May 12 02:32:02 2013] Mean detx,y = (2497.24, 1104.95) 
[Sun May 12 02:32:02 2013] ../../xmm0150150201/products/images/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src64_src.img and ../../xmm0150150201/products/images/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src64_bgd.img exist, delete to re-create
[Sun May 12 02:32:02 2013] ../../xmm0150150201/products/spectra/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src64_src.pi and ../../xmm0150150201/products/spectra/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src64_bgd.pi exist, delete to re-create
[Sun May 12 02:32:02 2013] Setting source spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src64_src.pi.gz
[Sun May 12 02:32:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Sun May 12 02:32:02 2013] ../../xmm0150150201/products/lightcurves/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src64_src.lc and ../../xmm0150150201/products/lightcurves/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src64_bgd.lc exist, delete to re-create
[Sun May 12 02:58:22 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 12 02:58:22 2013] rmf not generated due to insufficient counts
[Sun May 12 04:25:33 2013] Updating aperture counts using extracted products
[Sun May 12 04:25:33 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src64_src.pi.gz = 1881.00
[Sun May 12 04:25:33 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src64_bgd.pi.gz = 26.00
[Sun May 12 04:25:33 2013] Got source and background scale factors 1290544.000000, 378962.000000
[Sun May 12 04:25:33 2013] User source parameters:
  Position = (288.4, 351.0) = 8 24 14.47 -42 56 29.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1792.5 +/- 44.4
  Background aperture counts = 88.5
  Rate = 3 +/- 0.07

[Sun May 12 04:25:33 2013] Updating counts from extracted products
[Sun May 12 04:25:33 2013] Set source signif. to 1792.46/9.41 = 190.49
[Sun May 12 04:25:48 2013] No arf file for this source, not re-computing flux
[Sun May 12 04:26:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 12 04:26:30 2013] xmm0150150201/analysis//spectral/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src64_pl.csv not found, spectral fit skipped or did not complete