[Sun May 12 02:25:38 2013] Detection parameters:
  Position = (378.8, 389.8) = 8 23 38.67 -42 53 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.2 +/- 16.5
  Background counts = 38.8
  Rate = 0.06 +/- 0.01

[Sun May 12 02:25:42 2013] Off-axis axis estimate = 8.82'
[Sun May 12 02:26:58 2013] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:26:58 2013] Initial guess for spatial extent in simple fitting = 10.84"
[Sun May 12 02:26:58 2013] source mask rpix=2.5, npix_max = 35, mask sum = 35, frac = 0.977
[Sun May 12 02:26:58 2013] Giving source the simple spatial ID 65 for pass 0, mean size = 10.84"
[Sun May 12 02:27:01 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src65.ximg exists
[Sun May 12 02:27:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src65.csv
[Sun May 12 02:27:01 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src65_1.ximg exists
[Sun May 12 02:27:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src65.csv
[Sun May 12 02:27:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:27:05 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Sun May 12 02:27:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src65.csv
[Sun May 12 02:27:05 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Sun May 12 02:27:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src65.csv
[Sun May 12 02:27:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass0_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:28:12 2013] Warning: source 65 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 14.794086 pixels away
[Sun May 12 02:28:12 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:28:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:28:12 2013] Assessing source extent using major
[Sun May 12 02:28:12 2013] Source does appear to be extended
[Sun May 12 02:28:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:29:01 2013] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Sun May 12 02:29:01 2013] Initial guess for spatial extent in simple fitting = 10.84"
[Sun May 12 02:29:01 2013] source mask rpix=2.5, npix_max = 35, mask sum = 35, frac = 0.977
[Sun May 12 02:29:01 2013] Giving source the simple spatial ID 60 for pass 1, mean size = 10.84"
[Sun May 12 02:29:03 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src60.ximg exists
[Sun May 12 02:29:03 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src60.csv
[Sun May 12 02:29:03 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src60_1.ximg exists
[Sun May 12 02:29:03 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src60.csv
[Sun May 12 02:29:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:29:06 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Sun May 12 02:29:06 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src60.csv
[Sun May 12 02:29:06 2013] fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Sun May 12 02:29:06 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src60.csv
[Sun May 12 02:29:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0150150201_pi300-10000_cl_pass1_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:30:03 2013] Warning: source 60 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 13.466629 pixels away
[Sun May 12 02:30:04 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:30:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:30:04 2013] Assessing source extent using major
[Sun May 12 02:30:04 2013] Source does appear to be extended
[Sun May 12 02:30:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:30:04 2013] Source is confused with source 48
[Sun May 12 02:31:57 2013] XMMSAS src. selection expression = ellipse(32905.636017, 33867.778809, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 02:31:57 2013] Not overwriting source region fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src57_src.reg
[Sun May 12 02:31:57 2013] Extracting stamp from image fullrun_mos1_xmm0150150201_pi300-10000_cl_sm2.00.img.gz, (341, 352) - (416, 427)
[Sun May 12 02:31:57 2013] XMMSAS bgd. selection expression = annulus(32905.636017, 33867.778809, 1087.500000, 2175.000000, X, Y) && !ellipse(32374.626000, 36065.410080, 3616.248104, 3616.248104, 0.000000, X, Y) && !ellipse(31683.364075, 36396.789795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31362.997620, 35975.537537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30636.466000, 36283.276000, 1298.456037, 1298.456037, 0.000000, X, Y) && !ellipse(32751.981506, 36585.331390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30354.092000, 36746.856000, 1805.160052, 1805.160052, 0.000000, X, Y) && !ellipse(29899.633087, 36667.509857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30182.823822, 35595.475403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33166.242000, 37571.108000, 1873.376054, 1873.376054, 0.000000, X, Y) && !ellipse(30062.649231, 34141.536224, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 02:31:57 2013] Writing fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src57.gif
[Sun May 12 02:48:24 2013] Mean detx,y = (350.60, 9152.71) 
[Sun May 12 02:48:26 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 02:48:43 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 02:48:43 2013] Setting source spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Sun May 12 02:48:43 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Sun May 12 04:03:26 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 12 04:03:26 2013] rmf not generated due to insufficient counts
[Sun May 12 04:25:46 2013] Updating aperture counts using extracted products
[Sun May 12 04:25:46 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src57_src_b10.pi.gz = 48.00
[Sun May 12 04:25:46 2013] Total counts from fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src57_bgd.pi.gz = 0.00
[Sun May 12 04:25:46 2013] Got source and background scale factors 1159934.000000, 2386892.000000
[Sun May 12 04:25:46 2013] User source parameters:
  Position = (378.8, 389.8) = 8 23 38.67 -42 53 43.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 48.0 +/- 8.0
  Background aperture counts = 0.0
  Rate = 0.08 +/- 0.01

[Sun May 12 04:25:46 2013] Updating counts from extracted products
[Sun May 12 04:25:50 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 04:25:50 2013] Using photon index=1.80, rate=0.077, arf fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src57.arf
[Sun May 12 04:25:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 04:25:50 2013] Updating source flux to 1.7e-12
[Sun May 12 04:26:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 12 04:26:30 2013] xmm0150150201/analysis//spectral/fullrun_mos1_xmm0150150201_pi300-10000_pass1_cl_src57_pl.csv not found, spectral fit skipped or did not complete